How to Configure Microsoft loopback adapter in windows 2008

Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
Cheers

Hi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks

Similar Messages

How to configure MS Loopback Adapter in Windows 7

Hello all,
I installed SAP NetWeaver 7.02 SP06 ABAP Trial Version mainly to teach myself some
WebDynpro Programming for ABAP. Unfortunately this does not work correctly.
I created a View in a Web Dynpro Component and the Layout Preview does not work.
I activated the services suggested in
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30129979-011c-2e10-fb9b-a60e0d704c1d&overridelayout=true
and did use the report RSICF_SERVICE_ACTIVATION with the variants
WEB DYNPRO ABAP
WEB DYNPRO ABAP DESIGN TIME
WEB DYNPRO ABAP TEST APPS.
In Addition I have set the FQDN as described in the document. I think the problem is the
MS Loopback Adapter. It is displayed with "No connection" in the Network and Sharing Center. I have no idea
how to change this. I have set the IP Adress to the on suggested in the Installation Instructions (10.10.0.10, Subnet-Mask 255.255.255.0) but the Loopback Adapter is displayed with no connection.
If I call a test webdynpro with the Hostname "localhost" it does work, so I think the webserver is running.
Any ideas ?
How do I set up the MS Loopback adapter under Windows 7 correctly ?
Thank you in advance,
Axel

Hi Axel,
Now that you know your local network works correctly for a computer not connected to internet or intranet, you have to do this:
1- For "No Connection" error (it is not necessary for the sap system to work), it's normal.
Create a local intranet with a 2nd computer if possible and make a configuration for home network after you will see "Connected"
2-Use of Pc hostname
You must configure the "profile parameters" by using transaction RZ10 and activate services (it's not easy, you have to take your time).
3- Webdynpro
To see the result of the webdynpro appli, you may know that not all web browser versions are compatible. The recent browsers don't work, use iexplorer8 or mozilla but not google ==> you will solve the problem of "timeout".
After that:
Activate the "internet communication framework" by using Transaction SICF. It takes you to "Maintain Services" and then fill Hierarchy Type ==>services, execute to reach at this step:
default_host/sap/bc/gui and icf ( If you've installed sap java, you will see both sap and sap_java)
do a mouse right click and select "Activate Service" and choose activate all.
You can now test the sample via web browser by using locahost.
Best regards.
Edited by: Tchounkeu Magloire on Nov 1, 2011 3:48 PM

How to install Microsoft Loopback Adapter

I want to install the Microsoft Lookback Adapter in Windows 7. I have done this under Vista either via:
1) Control Panel, Classic View, Add Hardware
2) Device Manager, right click on root node and select Add Legacy Hardware
I can't find the equivalent under Windows 7 - any suggestions?
Thanks!

I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7. Hope this helps...
http://www.youtube.com/watch?v=R9674zGHxrE
Guides and tutorials, visit
ITGeared.com.

How to configue "Microsoft Loopback Adapter" ?

Hi,
I have Oracle 11GR1,Win XP. with DHCP enabled.
My conputer gets dynamic IP on connection to internet, so i want to install "*Microsoft Loopback Adapter*".
For that i visited this link:
http://download.oracle.com/docs/cd/B1930601/install.102/b14316/reqs.htm#BABGHEFB_
There, in section 2.4.5.3, Installing a Loopback Adapter on Windows 2003 or Windows XP,
step 20,they said to edit host file.
In this step i have some confusion:
>For example:
>10.10.10.10 mycomputer.mydomain.com mycomputer
What to write in above line in place of mydomain.com ?In above example mycomputer is the computer name.In my case
my computer name is user-5ef511de5
so , i wrote
10.10.10.10 user-5ef511de5 user-5ef511de5
This gave unexpected behaviour. That i was unable to connect on DB through any tool.
Please tell what exactly to write in that host file ?
My computer in standalone computer that frequently gets connected to internet via dial up connection.

bootstrap wrote:
How're you using oracle's own sqlplus? Are you able to connect to the database using cmd--> sqlplus "<username>/<password>@<tns alias>?
Yes
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
Start Date 28-NOV-2010 08:37:44
Uptime 0 days 0 hr. 15 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\shyam\product\11.1.0\db_1\network\admin\listener.ora
Listener Log File d:\app\shyam\diag\tnslsnr\shyam-5ef511de5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
The listener supports no services
The command completed successfully
TNSNAMES.ORA:
EARTH =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EARTH)
)Now, how do you think a connection is going to be established when your listener supports no services??
You may try this:
1. Make a static entry in listener for your database
or
2. Wait for sometime, so that pmon automatically registers the instance with listener
or
3. fire the command: sqlplus > alter system register;
Regards,
S.K.

How to add a network adapter in Windows 2008 Core

I installed Windows 2008 Core on an older server of mine. The install worked fine, but I dont think it recognizes the built-in BroadCom NICs. I downloaded the 2008 drivers and ran the necessary commands to load and install the drivers, aassigned IP settings, but networking still is not working. Is there a specific command for adding a NIC?

Hi,
Pnputil.exe is used to manually install, enumerate, or remove third party drivers. We can use the following command to install the driver:
Pnputil –i –a <path>\<driver>.inf
In addition, we can use DriverQuery.exe to enumerate and display a list of the installed device drivers, including the driver properties.
For more information about Pnputil.exe and DriverQuery.exe, you can refer to Windows Help and Support in Windows Server 2008.
Now I suggest confirming if the network adapter is recognized by Device Manager. To do so, please enable remote administration of server core and then check whether the network adapter is listed in Device Manager. To allow remote connection to Device Manager, please type the following command:
Netsh advfirewall firewall set rule group=“remote administration” new enable=yes
In addition, you must first enable the Allow remote access to the PnP interface policy setting. To do this, on a computer running Windows Vista or a full installation of Windows Server 2008, open the Local Group Policy Editor MMC snap-in, connect to the computer running a Server Core installation, navigate to Computer Configuration\Administrative Templates\Device Installation, and then enable Allow remote access to the PnP interface. Restart the computer running a Server Core installation.
Note that when Device Manager is used remotely, it is read-only.
Hope it helps.
Tim Quan - MSFT

Do i really need to install Microsoft Loopback Adapter ?

i am installing oracle 10g on windows xp proffessional + AMD sempron 3100+
when started oracle universal installer, i received a warning like following :
DHCP configuration detected , you need to configure ur primary loopback adapter to MICROSOFT LOOPBACK ADAPTER
i m using belkin wireless card to connect to internet and i dont need to change it anyway.
please someone suggest me : whether i shud continue with this warning OR do i need something more before installing oracle 10g ???
thanks in advance,
-imranmca

I have Windows XP professional SP2 with a static ip address of my internal lan.
The installation don't pass the check about lan with the same message as you
"DHCP configuration detected , you need to configure ur primary loopback adapter to MICROSOFT LOOPBACK ADAPTER". Why?
I followed the instructions and now is all working adding in the hosts file 2 lines and not only one:
IP_addr computer_name.domain computer_name
IP_addr sid_name.domain sid_name
I'm not convinced of my euristic solution... can someone explain me why i have to configure the microsoft loopback adapter when i don't have a dhcp configuration?

Microsoft Loopback Adapter

Hello,
I need help with configuring MS Loopback Adapter. I am trying to setup Oracle 11g r2 on my Windows 7 Professional laptop which is not connected to any network. There is no virtual network like VMWare either. I followed the instructions in the Oracle release notes but the loopback adapter still says "No Network Access"
The Device Manager for the adapter says, "This device is working properly"
C:\Windows\system32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : P7One
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.10.10.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Control Panel>>System shows:
Computer Name: P7One
Full Computer Name: P7One
My laptop is not on any domain. I edited the hosts file as follows:
10.10.10.10 P7One P7One
Network Connections>>Local Area Connection 2
Properties:
I check IPv4 and unchecked everything else.
IPv4 Properties>>Advanced>>WINS
I disabled NetBIOS over TCP/IP <--------- Not sure if this was required.
I disable all other Network connections like Bluetooth and Wireless while trying to use MS Loopback Adapter but the Local Area Connection 2 Status dialog box says:
IPv4 Connectivity: No Network Access
IPv6 Connectivity: No Network Access
Media State: Enabled
Duration: 00:00:00
Speed: 10 Mbps
Activity:
Packets sent: 31. Received:0
Please help me out here. Thank you!

DBCA again failed during reinstallation of Oracle with the following error messages:
DIM-00019
OS-1053
ORA-12560
INS-20802
The description of these messages are 3 posts above in this thread.
Updated cmd results after reinstallation:
C:\Windows\system32>ping p7one
Pinging P7One [10.10.10.10] with 32 bytes of data:
Reply from 10.10.10.10: bytes=32 time<1ms TTL=128
Reply from 10.10.10.10: bytes=32 time<1ms TTL=128
Reply from 10.10.10.10: bytes=32 time<1ms TTL=128
Reply from 10.10.10.10: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.10.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-MAY-2011 13:24
:27
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-MAY-2011 13:24
:46
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 21-MAY-2011 13:18:30
Uptime 0 days 0 hr. 6 min. 19 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\P7\product\11.2.0\dbhome_1\NETWORK\ADMIN\listen
er.ora
Listener Log File d:\app\p7\diag\tnslsnr\P7One\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\Windows\system32>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-MAY-2011 13:25
:56
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
C:\Windows\system32>
Please note that it is still not using 10. address.
C:\Windows\system32>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sat May 21 13:34:41 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I believe I have not been able to successfully configure MS Loopback Adapter.
In Control Panel >> Network Connections it is still showing:
Local Area Connection 2
Unidentified Network
Microsoft Loopback Adapter
No Network Access
Edited by: 859535 on May 21, 2011 10:40 AM

How to configure sender mail adapter

Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu Singhal

Hi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to configure an jms adapter to use ActiveMQ?

Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
     java.naming.factory.initial     org.apache.activemq.jndi.ActiveMQInitialContextFactory
     java.naming.provider.url     tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
     at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
     at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
     ... 51 more
what should I do? can someone give me a detail resolvent?

I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
          <import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
     <imported-shared-libraries>
          <import-shared-library name="apache.activemq"/>
     </imported-shared-libraries>

How to configure RFC receiver adapter

HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.

Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam

Why Microsoft Loopback Adapter in SAP Installation ?

Hello Gurus
Please Tell Me The Concept of Microsoft Loopback Adapter ?
Why we are using this when we install SAP ?
Please Suggest Any Hyperlink Or Document Where we are going to Get The Information on This
Thank You

Hi Srinivas,
If loopback adapter is not installed on your system then it not able to go inside the \\<hostname>\sapmnt or saploc directory.
Moreover SAP engine requires a LAN adapter to function properly and since sapmnt is shared folder it will get accessed while network is available.
Check the below link
http://www.stechno.net/sap-notes.html?view=sapnote&id=698014
With Regards
Ashutosh Chaturvedi

Microsoft Loopback Adapter ping failed

I have a laptop and a desktop both running XP Pro SP2. I followed the instructions to install Microsoft Loopback adapter as part of the Oracle installation.
On the desktop, I successfully installed Microsoft Loopback adapter. I was able to ping the IP and host name of the loopback adapter and everything works fine.
On the laptop, I installed the Microsoft Loopback adapter. I cannot ping the Microsoft loopback adapter's host or IP. I can ping localhost and external internet hosts/IP.
Any ideas?

Madrid,
Thank you very much for your help. On my laptop, I have Norton Internet Security (NIS) and there was a firewall rule blocking the traffic.
This problem is now resolved.
Thanks for your help, Madrid.

How to Configure Receiver Mail Adapter?

I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
Mrudula

I am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

How to configure apache and weblogic in windows 2000

i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to Configure Microsoft loopback adapter in windows 2008

Similar Messages

Maybe you are looking for