How to configure multiple RAS servers?

Hi
'Crystal Reports Server Embedded XI R2 - Sizing and Configuration Guide'
It mentions that we can get more license and add the servers in ClientSDKOptions.xml.
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
  <ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER1:1566</Server>
    <Adapter>TCPIP</Adapter>
  </ServerInfo>
</ServerInfos>
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
  <ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER2:1566</Server>
    <Adapter>TCPIP</Adapter>
  </ServerInfo>
</ServerInfos>
I tried this and added ClientSDKOptions.xml file in the web application lib directory
Added that to PATH
Our application uses (Crystal-2008 / rasapp.jar /rascore.jar)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument
When i commented out rcd.setReportAppServer(sn); it is not picking up from the XML file.
I am getting the below error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
at com.crd.report.crystal.CrystalFile.makeRcd(CrystalFile.java:65)
at com.crd.report.crystal.CrystalReportUtil.makeRcd(CrystalReportUtil.java:892)
Please help me how to set up multiple RAS servers.
Thanks
Sumathi

You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses.

Similar Messages

  • How to configure multiple smtp servers per domain

    Hi,
    how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

    Hi Martin,
    Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
    Now the question goes as follows:
    Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
    Thanks in anticipation,
    Ruchi/Saurabh

  • How to configure multiple report servers in Oracle 10 G R2?

    I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
    Currently, the application is running with single report server.

    Hi Martin,
    Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
    Now the question goes as follows:
    Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
    Thanks in anticipation,
    Ruchi/Saurabh

  • How to configure multiple (virtual) servers?

    Hi, I have one public IP (for example: 92.62.26.10)
    and 3 servers. Mac Server, Ubuntu Server and Windows server..
    Snow Leopard server have 92.62.26.10 & 192.168.1.1
    Ubuntu server have 192.168.1.10
    Win server have 192.168.1.11
    DNS is set to:
    mac.domain.com - 92.62.26.10 (it's worked everywhere)
    ubuntu.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
    win.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
    What I need to setup? Proxy or something else?
    Thank you
    Message was edited by: Jirik.me

    You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
    If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
    It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
    Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
    If you need more flexibility you may need to get more external IP addresses.

  • How to configure multiple domains in Active directory

    HI,
    How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
    I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
    To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
    Please tell me how to configure multiple domains in LDAP server ( Active Directory).
    I skiped DNS configuration while AD installation.
    -ravi

    I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

  • How to configure multiple listeners to listen for the same instance.

    Hello everyone,
    I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
    According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
    Please only give detailed answers with example as I am tired of simple answers with details that I already know.

    Hello,
    Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
    By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
    i.e
    local_listener=MY_SET_OFF_LISTENERS
    in your tnsname.ora add an entry called:
    MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
    In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
    If you want your clients can be balanced over the 3 listeners

  • How to configure multiple databases in single listener

    Hi,
    I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
    Also can I use the same port number for all the databases.
    please give your suggestions.
    thankyou
    satyanag

    Please check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
    Jonathan Ferreira
    http://oracle4dbas.blogspot.com

  • How to configura multiple ldap server to the sun access manager

    Hi,
    please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
    Thanks
    Mouli

    There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
    You may try to create the datastore using the commandline (amadmin)
    Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
    You may also try to create amadmin account in the external ldap directory.
    (Un)fortunately i�ve never tried to remove the default datastore.
    -Bernhard

  • How to configure multiple IP-Adresses on one NIC in OVM

    Hi guys,
    we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
    eth0:0 - 192.168.31.x
    eth0:1 - 192.168.33.x
    eth1 - 192.168.0.x
    eth2:0 - 192.168.32.x
    eth2:1 - 192.168.34.x
    I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
    DEVICE=eth0:0
    BOOTPROTO=static
    ONBOOT=yes
    NETMASK=255.255.255.0
    IPADDR=192.168.31.3
    TYPE=Ethernet
    HWADDR=00:1b:21:06:f0:fa
    But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
    I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
    I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
    Has somebody any experience with a setup like this? I would really apreciate your help.
    Thanks
    Marek

    Hi,
    configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
    E.g. this little script is what I use to configure VLANs and briges on my OVM:
    #!/bin/bash
    echo "Configuring VLANs and bridges\n"
    echo "Configuring VLAN 24 on eth2"
    vconfig add eth2 24
    brctl addbr br2.24
    brctl addif br2.24 eth2.24
    ifconfig eth2.24 up
    ifconfig br2.24 up
    echo "Configuring VLAN 31 on eth2"
    vconfig add eth2 31
    brctl addbr br2.31
    brctl addif br2.31 eth2.31
    ifconfig eth2.31 up
    ifconfig br2.31 up
    This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
    [root@oraclevm01 ~]# cat /etc/init.d/vlan-config
    #! /bin/bash
    # vlan-config configure VLANs
    # chkconfig: 2345 11 89
    # description: Configures VLANs at boot time before the \
    # network is started.
    ### BEGIN INIT INFO
    # Provides: $vlan
    ### END INIT INFO
    # Source function library.
    . /etc/init.d/functions
    if [ ! -f /etc/vlan-config ]; then
    exit 0
    fi
    # See how we were called.
    case $1 in
         start)
                   # configure vlans
                   /etc/vlan-config
              echo $"Usage: $0 {start}"
              exit 1
    esac
    exit 0
    Hth,
    budy
    Edited by: budachst on Jun 29, 2011 8:11 AM

  • How to configure multiple IP addresses on one NIC?

    Hi,
    I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
    All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
    Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
    So any advice is well appreciated.
    Thanks!
    Regards,
    Marek Hubatka

    You should be able to do this by using "VLAN Groups".
    http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
    Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

  • How to configure multiple dev environment in single IP

    HI,
    I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
    in that single WLS so that each user will have their own partition/environment to
    play around. Once they are happy with their EJBs then we shall move them to a testing
    environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
    about this one.
    Many Thanks
    Vasan.
    PS: I dont want a clustering technology all i want is that in a single ip i wanna
    multiple development environment.

    Tom,
    looks like you are specifying http protocol in
    sky.framework.ejb.SkySessionBean.getInitialContext method.
    Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
    PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
    enable HTTP Tunneling in server to which initial context is created. It is
    disabled by default in 60. You can do so via console. Please refer to
    documentation , let me know if you need additional help.
    Viresh Garg
    Principal Developer Relations Engineer
    BEA Systems
    Tom Purcell wrote:
    Kevin,
    You said that with 6.0 the following happens:
    On the second server I get an error when I do
    http://host:secondServerPort/index.html
    Is this the error you get on the Admin Server:
    <Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
    code: 'Failed', reas
    on: You are trying to use http tunneling
    The server will not let you connect'>
    <Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
    request
    weblogic.common.T3Exception: You are trying to use http tunneling
    The server will not let you connect
    at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
    at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
    at
    weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
    467)
    at
    weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
    at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    And on the Managed Server:
    <Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
    connect to: '0S:127.0.0.1
    :[-1,7001,-1,-1,-1,-1,-1]'
    java.net.ProtocolException: Tunneling result unspecified - is the HTTP
    server at host: 'localho
    st' and port: '7001' a WebLogic Server?
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
    onnectio
    n.java:152)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
    ava:194)
    at
    weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
    nection.
    java:98)
    at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
    at
    weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
    a:997)
    at
    weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
    at
    weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
    at
    weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
    at
    weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
    at
    weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
    textFact
    oryDelegate.java:232)
    at
    weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
    textFact
    oryDelegate.java:174)
    at
    weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java
    :123)
    at
    javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
    at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
    at javax.naming.InitialContext.init(InitialContext.java:222)
    at javax.naming.InitialContext.<init>(InitialContext.java:198)
    at
    sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
    at
    sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
    at
    sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
    ntext(Sk
    yReferenceSessionBeanImpl.java:87)
    at
    weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
    9)
    at
    weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
    a:90)
    at
    weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
    5)
    at
    weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
    at
    weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
    at
    weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
    :55)
    at
    sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
    rce(SkyR
    eferenceSessionBeanEOImpl.java:22)
    at
    sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
    oke(SkyR
    eferenceSessionBeanEOImpl_WLSkel.java:161)
    at
    weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
    at
    weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
    :128)
    at
    weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
    at
    weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
    java:103
    at
    weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
    7)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    Thanks,
    Tom
    <Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
    to get a: 'Protocol
    : 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
    "Kevin Apte" <[email protected]> wrote in message
    news:[email protected]...
    This advice applies to WL5.1. I have been trying to configure a
    multiinstance Weblogic with no success. I want multiple copies
    of the sample petStore available for test by multiple users.
    I think in 6.0
    You would need to open an admin server
    Open the configuration file for say PetStore.
    Clone the petStore- call it petStore2. .
    Create a copy of the startup script and modify it to start PetStore2.
    After doing this only one config.xml is created for both servers.
    I am able to start the first server and view the petStore application,
    On the second server I get an error when I do
    http://host:secondServerPort/index.html
    How does one create multiple instances in WL6.0 using the console
    or using a XML editor ?
    Jesse E Tilly <[email protected]> wrote:
    [This followup was posted to weblogic.developer.interest.management
    and
    a copy was sent to the cited author.]
    In article <[email protected]>, [email protected]
    says...
    HI,
    I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
    in that single WLS so that each user will have theirown partition/environment to
    play around. Once they are happy with their EJBs thenwe shall move them to a testing
    environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
    about this one.
    Many Thanks
    Vasan.
    PS: I dont want a clustering technology all i wantis that in a single ip i wanna
    multiple development environment.
    NT isn't a multiuser environment. I will assume that
    you mean some
    Win32 box sitting in a room where people can copy their
    classes/EJBs and
    test their stuff. If this is the case, the setup is easy.
    Create a directory and startup script for every developer.
    Have a
    global properties file in the same directory as the scripts
    so that
    common settings are, well, common. Tell each user to
    modify the various
    parts of the properties files in their directories to
    deploy EJBs and
    register servlets, etc etc.
    In each startup script, you will have to specify the server
    directory
    and the binding port for each person. Pick a port (something
    easy to
    remember and high, like 30000, 30001, etc etc) for each
    person. Why?
    Well, when they connect to the app server, they'll know
    they're hitting
    only their server. Also, TCP/IP won't let more than one
    JVM bind to the
    same port, so if you want simultaneous instances (> 4
    you better have
    one kick ass Win32 box) you have to do this.
    Hope this solves your problem.
    JT
    Senior Developer, HotelTools INC
    [email protected]

  • How to setup multiple content servers on one host

    Hi,
    We have setup 2 ECC 6.0 systems on one host ECC DEV and ECC QAS. Windows 2003 Server 64bit
    We want to setup 2 standalone Content Servers (MaxDB). One contentserver pointing to ECC DEV and one to ECC QAS. Containing its own content.
    Problem is that I was not able to set up 2 content servers on one host because in ISS i could only create one default webservice during installation.
    To my opinion it must be possible to setup 2 standalone content servers on one host, question is how?
    Can anyone help me how to proceed?
    Many Thanks!
    Best regards,
    Jacco Raymakers.

    Hi Jacco
    You cannot Configure Two Content Servers on IIS( One Sigle Hardware).
    As this Content Server you have configured can be used by both  ECC DEV and ECC QAS.
    There is no need of two content servers.Same Contentent server can be used by ECC DEV and ECC QAS.
    Configure Content Repository and Content category diferrent for ECC DEV and ECC QAS.
    I hope I have answered your query.Please let me know if helpfull.
    With Regards
    Mangesh Pande

  • How to Configure Multiple Purchase Requisitions per Service Order

    Hi experts!
    Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
    What would be the pros and cons of doing this?  We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key.  Is the control key the best way to go, or should I be looking at a different deciding field?
    Thanks in advance!
    Stephanie

    Raj,
    Thank you so much for the information.  That does help!  However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
                 - New Purchase Req created for different operations (you explained how above, perfect!)
                 - Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
                 - New Purchase Req created if the order has already been released.  (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req.  If the order's status is "Released", and a new component is added, a new Purchase Req is created).
    As mentioned, you explained how to do the first requirement.  Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
    Thanks in advance!
    Steph

  • How to Configure Multiple Relays / Mail Gateways

    Platform: Sun Solaris 8
    Software: iMS 5.2
    How to Configure two MX ( relay / Gateway servers) records in imta config file..? Our requiorement is to have two gateways defined ..for example "xyz.net" and "xyz.com". All emails destined to email addresses ending with ".net" should use the "xyz.net" gateway and rest of them should use the "xyz.com" gateway. and the configuration should be flexible enopugh to accomodate future additions to our gateways.
    An Early Response would be appriciated.
    Thanks
    Arun Addepalli

    Well, To point the outside mail servers to your gateways just put MX entries for each domain into DNS and point dns to the correct host for that domain.
    To make the mail server recognize the domain just create it in the ida and put the users under that domain. The users mailhost attribute will take care of letting the gateways know where to forward the mail so it will go to the correct host.
    If you need to do domain aliasing with the same users for both domains that is a bit different. Do you need to do this?

  • How to configure multiple clusters on the same machine.

    I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
    "This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
    Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
    Thanks,
    Jacob

    FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
    Re: UDP flood hosed my LAN?

Maybe you are looking for

  • Im getting a folder with a "!" any success stories??

    I have recieved both an unhappy icon and a this folder, what does it mean as apple give no direct answer. Alsohow do you phone up because they say you have to pay?? How do you organise to send back??

  • How do you minimize a full-screen published project?

    I'm working on a project that will be published full-screen .exe.  Is there a way to add a button to the skin to minimize the project for the user?  Just in case they need to check email or something without having to click the 'X' button.

  • A question about "AI acquire waveform.vi ".

    I use my DAQcard(PCI-6024E) to acquire two AI signal at the same time through AI acquire waveform.vi. But it is getting into a serious delay on my executing progarm by monitoring my time depended plot or time-counter(It is about 5 seconds in the real

  • Screen Capture blurry - no mater what

    I have a screen capture of software that is saved as a quicktime file. no mater what I do it is blurry in FCP. Even if I use compressor to convert it to DV first. It is not in the right aspect ration, is that what is causing my issues? MacBook Pro Ma

  • Ebay listing error

    When I try to select a category to sell an item on eBay I get the following error message. "Please provide the correct information in the highlighted fields. Please select at least one category to list your item in." I can search and select the categ