How to configure notification emails for reports output or alerts for all users in r12

Hi,
I need to configure notification emails. I have provided settings in OAM-> Workflow and SMTP IP address in settings and only Outbound. I am able to test for my user ID.
I want to know how to redirect emails or alerts for users like when a user runs a report he should get notification email in his outlook about the report output and details. In settings it only points for one replyto field. How do I mention all user ID's?
Regards,
Mohammed

Hi Mohammed,
You may check on XML bursting for XML based reports.
In addition, also see links:
http://oracle.anilpassi.com/email-output-of-concurrent-program-request.html
Anil: Oracle Apps Concurrent program Output as Email
Oracle ERP World: Email the output of a concurrent program as Attachment
Also see:
How to Redirect Output from Printer to Mail Message after Running Report (Doc ID 1036586.6)
Thanks &
Best Regards,

Similar Messages

How to Configure PeopleTools 8.49 Report Manager ?

Folks,
Hello. I am using PeopleTools 8.49. I run a process in Process Scheduler successfully but cannot see its output report. It seems that there is a procedure to configure Report Manager at first so that all reports are stored in Report Manager after run processes in Process Scheduler.
Do any folks understand how to configure PeopleTools 8.49 Report Manager properly ?
Thanks.

Report Manager is a utility in PeopleSoft to view Reports from a different place than Process Monitor. Navigation: Reporting Tools -> Report Manager. It has fours pages: List, Explorer, Administration and Archives.
PSDSTSRV generates a message after a process gets posted in process monitor in order to display reports in Report Manager - List and Explorer page. Hence Integration Broker setup needs to be done and PUB/SUB App Server Processes required to be up and running. Here are the configuration steps:
- Navigate to PeopleTools -> Integration Broker -> Integration Setup -> Service Operations
- IB needs to be configured for four services
•PSRF_FOLDER_CREATE
•PSRF_REPORT_CREATE
•PSRF_REPORT_DATE_CHANGE
•PSRF_REPORT_DELETE
- Open Service Operation PSRF_FOLDER_CREATE and make it active in General tab.
- In Handlers tab add a handler and make it Active. Handler name might differ from the screenshots's name but the Application Class definitons must match. Package name is same as the service operation name.
- In Routings tab, add a routing definition and make it active. Not sure, but I think only one routing definition must be active at a time... Sender and Receiver node are the local nodes - in my case it is PSFT_HR... to confirm your local node, go to PeopleTools -> Integration Broker -> Integration Setup -> Nodes and search for node...
- Repeat the above activity for rest of the services PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE, and PSRF_REPORT_DELETE also. Configuration is almost similar e.g., make the service active in general tab, Add a new handler and make it active (class id would differ for all) in handler tab, Add a new Routing Name and make it active in Routings tab.
You might want to navigate PeopleTools -> Integration Broker -> Integration Setup -> Routings / Services to check your routings or Services definition and status.
Here completes IB configuration from PIA. A prior understanding of IB setup would help troubleshooting or any kind of configuraiton understanding in case something looks missing here.
Next step is to start the PUB/SUB App Server Processes... Once these server processes are up and running, reports would get displayed in Report manager - List/Explorer page.
Of course, basic IB setup is pre-requisite for the above activity to work. This includes Gateway configuration (PeopleTools -> Integration Broker -> Configuration -> Gateway), Gateway Setup Properties (PeopleTools -> Integration Broker -> Configuration -> Gateway -> Gateway Setup Properties), Quick Configuration (PeopleTools -> Integration Broker -> Configuration -> Quick Configuration) where you need to Gateway URLs and IB domains are active.
let me know i f u have any questions or concerns... they are all delivered nodes by peoplesoft.
Thanks!!....

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

Automatic notification containing the report output

Hi,
I need to send an automatic notification containing the report output and a link to the SAP screen containing the report output to sap inbox.
The notification contains a link to the report output screen.
When user clicks on it(link), it takes him to the SAP report output screen which contains only the customers that the credit rep is assigned to..
I had done this using BDC , if itu2019s possible without BDC or Webdynpro and Workflow please let me know.
Thanks for your help.
Shilp....

Hi
Your pgm is not passing anything in obj_descr in packing list for excel file. If you pass a name your excel file will have that.
Regards
Sathar
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
' ' *------> no value*
changing gd_error
gd_reciever.
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription *----> no value*
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
t_packing_list-obj_descr = ld_attdescription.

Generate spool req number for report output list

Hi,
How to generate spool request number for report output list while executing the report.Please provide if you have any sample code.
Thanks and Regards,
BSR.

HI srinivas,
welcome to sdn.
Exporting the Contents of a Spool Request
Use
You want to export the content of a spool request in one of the following ways:
·        As a text file to the SAP GUI working directory
·        Unconverted or as a table, RTF, or HTML to a directory of your choice
·        As a PDF file to a directory of your choice
Procedure
Follow the procedure below:
Exporting to the SAP GUI Working Directory
If you are exporting large quantities of data, downloading the spool request as a text file to the SAP GUI working directory is a good solution.
Choose Spool Request ® Forward® Export as Text.
The entire text is stored in your SAP GUI working directory in ASCII format.
A file of this type is named using the following pattern:
.txt
Example: ABC0000004327.txt
You require appropriate authorization for this function from your administrator.
Exporting Unconverted or as a table, RTF, or HTML to a Directory of Your Choice
With this method of exporting a spool request, the content of the spool request is first displayed, and you then download the content in the format of your choice to a directory of your choice.
       1.      Select the spool request to be exported and choose Display Contents.
       2.      In the case of SAPscript/Smart Forms documents, activate list display by choosing Goto.
       3.      Choose System ® List ® Save ® Local File.
       4.      Choose one of the available formats and confirm your choice.
       5.      Choose a directory and save the spool request.
By default, only the first 10 pages of a spool request are saved in a file. You can increase the number of pages to be saved by choosing Goto ® Display Requests ® Settings and making the desired entries in the Display Area group box.
Exporting as a PDF File
You want to export the contents of a spool request as a PDF file to a directory of your choice, and print the file as required. The PDF file contains the print data in the format in which it would be output by the printer.
The following procedure is irrelevant for the printing of PDF-based forms, since a PDF file is already returned with this method. See also Displaying and Printing PDF-Based Forms.
You also require authorization from your administrator to run this report.
The PDF file is generated as follows with report RSTXPDFT4:
       1.      Generate a spool request from the document to be printed.
       2.      In transaction SE38, start report rstxpdft4.
       3.      In the displayed window, enter the spool request number and the directory in which the PDF file is to be stored.
Leave the Download PDF File option selected.
Choose Execute.
       4.      In the next window, you can confirm or change the path in which the file is be stored.
Save your entries.
       5.      The system displays a log from which you can see whether the report was successfully performed.
You can then open the file from the directory and print it as required.
Restrictions for Exporting as a PDF File
·        The PDF conversion only supports true bar codes for Smart Forms, which were generated with the new bar code technology as of SAP NetWeaver 04. In all other cases, the bar code is only simulated.
·        PDF conversion, especially of ABAP lists, is slower and is therefore not suitable for mass printing. However, you can speed up the conversion to PDF using the FASTLISTCONV option in report RSTXPDF3.
·        The font selection for ABAP lists is predefined in the PDF converter and cannot be changed.
For more information about constraints, see SAP Note 323736 in the SAP Service Marketplace
see this links
http://help.sap.com/saphelp_40b/helpdata/en/d9/4a98f351ea11d189570000e829fbbd/content.htm
http://web.mit.edu/SAPR3/docs/webdocs/reports/rpRFprint.html
regards
shankar
reward me if usefull

0calweek issue for report output

0calweek issue for report output
I have loaded 0calweek in my infosource.0calweek format is displaying differently
in the report
File : 12005
PSA :12005
ODS : 012005
Cube : 012005
Report: 05/0120
I am loading first to PSA -> Process Manually to ODS -> Cube
I am using 0calweek is SAP Provided object.I am not doing anything in the 0calweek
Please advise on this.
Advance Thanks

I solved this issue. I changed the layout everything seems to working now.

How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

Hi All,
Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
Reagrds,
Vikas

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure the email in SAP

Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep Verma

Hello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

How can I generate email from report 6i.

Dear Sir,
When I click on e-mail button on report 6i (Win2k User) Generate following error:-
Rep-4203 error occurred while a mail message.
Rep-4220 There is a problem with the email subsystem.
When I generate report from administrator then email generated no error occurred.
Please help me how can I generate email from report 6i without administrator rights.
Thanks and Regards
Brij

You can try this at form that calling your report;
add_parameter(p_id,'DESFORMAT','HTML');
hope this helps...
defne
ps: raporu cagiridigin form program units'ine, bu add_parameter'i eklersen, HTML olarak raporunu emailleyebilirsin...

How do I change the script for a voice iChat Alerts for when a friend becomes unavailable?

How do I change the script for a voice iChat Alert for when a friend becomes unavailable?
Before I upgraded my system from Mac OS 10.4.11 to Mac OS 10.6.8 - I a had personalized the script for a voice iChat Alert when my husband logged off from work. I had the ichat voice warn me "OH, Crap! he's coming home now! Hurry clean house!" This personalized voice alert did not survive the upgrade. Now, I need step by step instructions to walk me through the process. Please help! I mis my machine shouting funny profane alerts.

Hi,
In iChat 3 (OS 10.4.x) there was Line at the Bottom of iChat > Preferences > Alerts that you could enter text to and it would speak that Text.
(you could set something against Individual Buddies as well).
This Setting is not there in iChat 4 or 5 (I presume iChat 6 as well).
Now it is possible to write AppleScripts that can Speak.
It is alos possible in iChat 4 upwards to link an AppleScript to an Action/Alert
At this point my lack of AppleScript knowledge lets me down on what to tell you to do next.
An Alternative would be to Record a sound with said alert.
Place this sound in your Home Folder/Library/Sounds
Then in the Alert opton for youe husband select the Log off option and link that Sound
<
10:25 PM Wednesday; August 3, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can I get my iMAC (10.7 Lion) to display all users at start-up?

How can I get my iMac ( 10.7 Lion ) to display all users icons at startup/login?

Hi..
Open System Preferences > Users & Groups
Click the gold padlock icon to make changes. You may be prompted for your admin password.
Now select: List of users next to: Display login window as
Select Off from the pop up menu next to: Automatic login
edited by: cs

How to configure dynamic email address for notification

All,
I have a problem in assigning dynamic email address for notification activity in a bpel process, I want to assign a user from a user-properties file. How do I achieve this. I tried using the users in System-jazn-data.xml file, but if i add a email attribute to the existing users it doesn't show up. I am sure there should be an easier way of using identity service and adding attributes to the jazn realm user, I might be missing something.
I cannot have it as part of the payload the only way is to use identity service.
Thanks,
Chitra

Hi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

How to avoid # in the report output in BEx for null characteristic values?

Hi All,
In a query output, # values are shown for the charactersitics which are null. I would appreciate if someone would help showing null instead of # in the reports for the null values.
Regards
Subba

Hi,
There are various options.
1. Exclude the # in filters for that chararcteristics, it will remove all # values.
2. Display the text for that Characteristcs which will be displayed as "Not assigned".
3. If you want to display as "Null", Change the entry in text table of the charaterictics for value # as "Null".
4. While updating this filed in cube/DSO write routine to replace #/blank with "Null".
I hope it will help.
Thanks,
S

How to configure notification emails for reports output or alerts for all users in r12

Similar Messages

Maybe you are looking for