How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

Similar Messages

  • How to share one iTunes library with multiple computers AND Apple TV? Help?

    It seems like my dilemma may not be easily solved. Hopefully it isn't as complicated as I think it will be. Here's the situation:
    My wife hates that, in order to see or do anything with the images she takes, I need to have iPhoto open on my computer (Mac Pro), and she then has to connect to it over sharing.
    By the same token, I don't like that she buys iTunes content on her MacBook, which is sometimes a duplicate of content I already have. Now that the App Store is out, that is going to start getting really expensive.
    So instead, I want us to be able to:
    1) Have ONE iTunes library on the network, and ONE iPhoto library. Both of these would be accessible to any computer on the network. When you launch iTunes, you would get all the media that is in that library.
    2) Both be able to access iTunes at the same time to listen to / watch content.
    3) Both be able to purchase iTunes content, and when it it purchased, it updates that single library. If I buy a song, the next time my wife fires up iTunes, that song is there for her to listen to.
    4) Have our two Apple TV units be able to play content from this library.
    So, I know that we need something on the network. I have a Drobo with DroboShare, so that is one option. I also have a spare Mac Pro laying around, along with a copy of OS X Leopard Server.
    I just don't know what route we should take with this. All I want is for us to share a library, to be able to both use that library, for us to be able to sync content from that library to our portable devices, and for our Apple TVs to also see that library.
    Possible?!

    I'm sort of in the same boat. We've got an iMac with separate User Accounts set up and are currently sharing the same iTunes and iPhoto libraries along with streaming them to our Apple TV.
    Right now I'm the only one with an iPod, however she'll be getting one in a couple of weeks.
    We also just picked up a MacBook yesterday and I'd like to be able to sync certain libraries like iTunes and iPhoto so that no content gets duplicated on either the iMac or MacBook and so that we both have access to the current libraries for each program on our iPods and AppleTV.
    I have an external hard drive that I back up the iMac on and I assume I could manually keep things current with that but there's got to be an easier way...that's why these are Macs right?
    Bill

  • Configuring the weblogic domain with multiple managed servers(SOA)

    Hi
    We are trying to create a domain where we have a admin server and 2 SOA manged servers under a cluster.
    domain
    Admin_Server
    SOA_Cluster
    SOA_Managed1
    SOA_Managed2
    I tries the default values but that puts my soa-infra into the Admin server and as far as I know that is not supposed to be the case.
    Can any one tell me what are the libraries that I should be selecting for the cluster when I try configuring the domain?
    Thanks

    Thanks Vlad.
    I found another link that might be helpful to someone who is looking for something like this
    https://blogs.oracle.com/reynolds/entry/installing_an_11g_soa_cluster_2
    Thanks.

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    See this page for helpful information.
    http://samsoft.org.uk/iTunes/grouping.asp
    B-rock

  • BSPs configuration with multiple apps servers

    Hi Masters,
    This is regrarding configure ICM and BSPs on our production box with multiple application servers.
    We have our production box in a cluster environment.
    The central instance is dbciSAP and apps servers are sapaps2 thru sapaps6. The database is on shared disks. Whenever the central instance fails sapaps2 takes the control and become as dbciSAP but the main dbciSAP never become a application server when ever sapaps2 acts as dbciSAP. Since we have configured load balancing concept in production environment the users can login to system thru any application server. This is waht our environment.
    As part of our production box to SAP 4.7 upgrade from 4.6C, we are asked to configure the environment to deploy BSPs. We have successfully configured and deployed the BSPs in our DEV and QAS system  (Both are central instances with no application servers) except production box which is due in the next month.
    The process we follow to activate BSPs is as follows:
    1.Define an ICM service port in /etc/services file.
    2.Add the ICM related parameters in instance profiles.
    3.Make sure the ICM status is active in SMICM tx.
    4.Activate the BSP services in SICF as per OSS note 571484.
    Now, the question is how to configure the same ICM service and activate the BSPs since we have multiple multiple application servers.
    Subsequently What I am enquirying is:
    Do I need to define ICM service ports on each and every hosts where the application servers are running?
    Do I need to make changes to each and every instance profile of the application server?
    What are the differences in configuring ICM services on central instance and application instances?
    Appreciate any help in this regard.
    Thanks and Regards
    Murty Patchipala

    Grasshopper,
    I think what you should really read up on is the SAP WebDispatcher.  If are serious about running BSP/ICM across multiple app servers, this is the key technology:
    http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm  This may also answer some of your questions about profile parameters.
    Other than that I can share what we did.  We did activate the ICM and services on all app servers and central instance.  The service ports of the individual servers aren't that important now because of the WebDispatcher (at least they aren't visible to the user).
    Yes we did make some of the ICM profile changes in each instance profile.  If your settings are the same, consider using the default profile.   Are their particular settings you are interested?  I will look over ours, but I don't remember any huge differences from APP server to Central Instance.

  • Can I share one iTunes Library with multiple computers on a network?

    Can I share one iTunes Library with multiple computers on a network?
    note: one library universally shared, not Home Sharing (one library each, shared to each.)
    I want to share one library stores on my server and access it through various local computers. When I buy a song from a computer (non-server), I want it to be added to the library (stored on server). I want it to auto copy to my server, for organization. I want to be able to sync my phone from any computer.
    Most of this I can do, if i figure out how to use one universal library for all my computers.
    Any ideas how I can do this?

    eyeinit,
    You can authorize your iTunes account on up to 5 computers at a time.
    However, purchased music is downloaded to the first machine to download it, but these articles have more information on moving your music between authorized computers:
    http://docs.info.apple.com/article.html?artnum=93063
    This one is for moving all your music using an iPod as a storage drive
    http://docs.info.apple.com/article.html?artnum=300173
    Hope this helps,
    Nathan C.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How do you get a line with MULTIPLE fields to WRAP ?

    How do you get a line with MULTIPLE fields to WRAP ?
    Good afternoon everyone...
    THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
    HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
    If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
    A……………………… B
    XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
    But what if A is too long? I would want to see B wrap onto the next line like this:
    A……………………………………………………B
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
    YYYYYYYYYYYYY
    And similarly….if B is extra long, can the line print as:
    A………………………. B
    XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
    YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
    I don’t want the case where B is long and I get:
    A………………… …B…
    XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
    ………………………..YYYYYYYYYYYYYYYYYYYYY
    I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
    My SPECIFIC CASE
    I have a report that I have stripped down to a simple structure for the purposes of this explanation.
    My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
    Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
    The LAYOUT MODEL has a group frame (the main , base one)
    On top of this is a repeating frame based on the 1st group (family data).
    On top of this is another repeating frame for the 2nd group (species data).
    On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
    The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
    All fields on the report line have variable horizontal elasticity.
    The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
    Can the line be made to WRAP????..
    In my current report, 1 of 2 things is happening:
    1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
    2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
    But I would like a LONG line to continue printing onto the following line of the same page.
    I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
    I have been focussing my attention with this problem on the frames .
    We are using REPORT BUILDER V 6.0.8.26.0
    Thankyou to anyone who may offer assistance.
    Tony Calabrese.

    Steve,
    you gain 1 thing, but you lose something else!
    This thing is SO frustrating!
    Hey Steve! Good afternoon.
    I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
    So it looks like:
    &col1 &col2 &col3 &col4 &col5 etc etc etc
    And the line expands nicely to each field's requirements.
    And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
    The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
    So I wanted something like (ignore the dots):
    ...................................ppppp
    AAAA BBBB CCCCC DDDD EEEE FFFFFF
    So the field of 'ppppp' appeared slightly higher on the line than the other fields...
    I can't see how I can do this with a single TEXT field containing all the &COL values.
    Have you ever come across anything like this?
    Thankyou again,
    Tony Calabrese 12/4/2007

  • How to configure R/3 System with Load Balancing?

    Hello,
    I've created a Web DynPro Application and I would like to case an iView on  it. According to SAP tutorials I first need to configure an R/3 System with Load Balancing.
    My problem is how to configure the "WAS Host Name".
    According to the tutorial:
    WAS Host Name = <host>.<domain>:port (this corresponds to the Web Dynpro server location and the port on which it is running eg. PXYZ.wdf.sap.corp:50000.)
    I am using NW 04 and my portal is running on this address:
    http://ep6sp9test:50000/irj/portal
    When I set the WAS Host Name to ep6sp9test:50000 the Test connection fails (I have privildges and created an alias and User mapping). What should I put at this field then?

    Hi
    I think you have to specify the HTTP port og the WAS running the R/3 system. The 50000 port is the HTTP port of your portal - not the R/3 system.  You can see the HTTP port of the R/3 system using transactioncode SMICM - services in the R/3 system.
    BR
    Tom

  • How to Configure ODI Console to Connect Multiple Master Repositories

    Hi,
    Can anybody help me in following,
    1. How to configure ODI Console to access Multiple Master Repositories and its corresponding Work Repository?
    2. Solutions are not supported by ODI Console? Is it possible to import scenarios as solutions in ODI Console?
    Thanks
    MT

    MT,
    1. I can only speak on my own experience in setting up the ODI console, but my understanding is that the console is configured against a single master repository - the connection details are picked up when the WebLogic server starts.  If I'm wrong, I'm sure one of the gurus will correct me.
    2. I haven't come across a way to do this - I'm using 11.1.1.5.  Aside from my initial go-live, I tend to only promote individual scenarios across environments.  For the rare occasion when I need to do a larger bulk import I'll just use ODI Studio.

  • Is it possible to monitor more than one target/Host with one agent in OEM 12c?

    Hi,
    Is it possible to monitor more than one target/Host with one agent in OEM 12c? Please assist me on this

    Since by definition a single EM agent must reside on a single database host, then, no, you can't monitor multiple hosts.
    Unless you mean that you want to monitor multiple virtual hosts from a single physical host ... but in that case, you'd still need one host per database host.
    That's just the way EM works. Always has, probably always will.

  • How can a calender be synced with multiple apple devices

    how can a calender be synced with multiple apple devices so that all the users can be able to access the calender and also the entries done by one of them?

    Hi Muneshdm,
    Welcome to Apple Support Communities.
    See these articles for information on setting up iCloud on multiple iOS devices, as well as how to share calendars:
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    iCloud: Share a calendar with others
    http://support.apple.com/kb/ph2690
    Best,
    Jeremy

  • How to configure Apache Virtual Hosts?

    Hi, I was wondering, how does configure Apache virtual hosts for Mac OS X Client 10.4.5? At this time, I have added
    NameVirtualHost *:80
    <VirtualHost *:80>
    ServerAdmin [email protected]
    DocumentRoot /Library/WebServer/Documents/janus
    ServerName janus.php.test
    ErrorLog /private/var/log/httpd/janus.php.com-error_log
    CustomLog /private/var/log/httpd/janus.php.com-access_log common
    </VirtualHost>
    Finally, when I try to use the name in the browser, I get the following error message:
    Safari can’t find the server.
    Safari can’t open the page “http://janus.php.test/” because it can’t find the server “janus.php.test”.
    Well, I must go and thanks in advance.
    Peace,
    -Conrad

    If you want to use the fqdn you defined and can/do not want to register it as a Internet Domain you can add it to the hosts file in /etc/hosts if you are comfortable using terminal and the shell
    open a terminal
    and use the following commands
    cd /etc
    sudo vim hosts
    (you will be prompted for your password here, enter it and hit return)
    in vim scroll to the last line which will look like
    ::1 localhost
    type
    i
    (you are now in insert mode)
    type the following line
    192.168.0.15 janus.php.test
    (replace the ip address with the ip address of the host in question)
    hit Control-C
    type
    :w (vim will confirm in the last line)
    type
    :q
    you are back at the terminal
    test your new hosts file by typing
    ping janus.php.test
    Hope this helps
    Mike

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

Maybe you are looking for

  • Downloads never finalized, stuck in downloads folder

    To fully diagnose this problem, I will start from the beginning I noticed something a bit 'off' about iTunes. i was browsing the iTunes Store, looking for a good mix of music to buy, adding to the Wish List, blah blah blah. I left the computer runnin

  • Request a Line reset?

    I upgraded to Infinity about 6 months ago.  The line speed never increased from what we'd had originally - we went from 5mb ADSL to ... 5mb Infinity. I meant to complain and try and get it sorted but you all know that process and I just didn't have t

  • When opening a new tab in firefox 3.6 can google automatically be displayed?

    I had to reformat computer and reinstall FF I am sure google ( which is set as home page) used to appear in a new tab but now I gat a blank page ..I have searched options to see if I can set to open but cannot see how...any help welcome:~)

  • Adding a page to a calendar

    Hi there, I'm creating a photo calendar for my extended family, and I'd like to include a page that lists everyone's contact info (or the back cover would be fine)...but I can't figure out a way to add a page or print something that's not a photo. Th

  • How to obtain "permission" to update?

    Each time I download an update to Firefox and attempt it drag it into my applications folder, I first get the message asking if I want to replace the older edition. When I click yes, I then get the message that I do not the the necessary permissions.