How to configure Oracle 10g RAC on windown sever 2003

hi all
plz tell me
how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
plz it is very necessary for me
Regards

Hello,
There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

Similar Messages

How to configure Oracle 10g Advanced Security to use SSL concurrently with

How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert advice

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

Time synchoronization while configuring Oracle 10g RAC

I am installing Oracle 10g RAC on 3 EHEL5.0 systems. The problem is the time can not be synchoronized although I had already enaled the Network Time Protocol and let all the related servers to be synchoronized with the same NTP server.
I want to know why the time cannot be synchoronized on different servers?

Time synchronization with RAC is critical. Oracle will refuse to install if you do not perform this step.
You have three choices. The more risky one is to configure access to an external time server. I don't like this because it does create a path between my data server and the internet. The second is to build a time server in our data center that you reference. This is the best option as you can, and should, use that server for synchronize everything which is a great help with replication. The third choice is to arbitrarily choose one node and synchronize the other nodes with it. The downside is that if you lose that node you are at risk.
There are plenty of instructions on how to create a time server on the internet but no matter which choice you make ... you will need root privs on operating system to configure it.

How to configure Oracle 10g to use 4GB memory

I'm trying to configure Oracle 10g to use >4GB memory. Have configured server boot.ini with required flags (/3GB /PAE). Rebooted server then created standard database, then connected to db instance and changed oracle parameters DB_BLOCK_BUFFERS, USE_INDIRECT_DATA_BUFFERS as required. Restarted DB instance, DB fails to restarted with SGA memory error. According to oracle user docs the SGA is nolonger in effect due to previous settings. Can you provide example of SPFILE with parameters settings that do work and use >4GB memory. Current server has 8GB, 2 x Dual XEON core/processors (i.e. 8 processors)

The recommended /3GB switches in the boot.ini file can only be used with the following operating systems editions (KB article 291988):
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Data Center Server
Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows Server 2003, Data Center Edition
Microsoft Windows Small Business Server 2003
Important: Windows 2000 and 2003 Server Standard Editions DO NOT SUPPORT /3GB Switch.
So if your OS is listed above, then you cannot have a larger SGA.

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to start Oracle 10g RAC database and clusterware?

I have steps to stop the 10g RAC Database and clusterware but not sure about starting it.
I have heard executing
$crsctl stop crs --as root
on each node
will start the database,asm,nodeapps .Is that true?
or we have to do that step by step like we do in stopping the clusterware and database below
1.Stop the agent:
cd to $AGENT_HOME/corpng04.amhc.amhealthways.net/bin, then run: ./emctl stop agent
2.Stop the full database
$ oracle_home/bin/srvctl stop database -d db_name
3.Stop the ASM Instances on node1,node2
$ oracle_home/bin/srvctl stop asm -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
4.Stop the NodeApps :vip,listener,oms and gsd
$ oracle_home/bin/srvctl stop nodeapps -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
5.Stop the CRS cluster processes :those bloody 3 evmd,ocssd,crsd
$su - root
$CRS_home/bin/crsctl stop crs

Paul R @ NL wrote:
before is shutting down crs i tend to stop the instances and services via srvctl then stop crs via crsctl
just the way i do it. not saying it's the right way but it is the one i am comfortable with.Good -) If we stop CRS, but forgot shutdown oracle instances ... we'll see shutdown abort in alert log file(that mean instances are shutdowned abort).
We should shutdown instance before stop CRS anyway.

Oracle 10g RAC installation on linux server.

HI,
Can anybody help me that to give some answers of my question's ?
can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
if i can then plz tell me this how can i do this.
i am new in linux server just wanted to learn that how to install oracle 10g RAC.
thanks & Regards to all of my seniors..

The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

DO I need SFRAC for Oracle 10g RAC on Sun Solaris

My platform is SUN Solaris 10 64 bit on v490 server. On the backend side, we are using EMC CX500 storage. We will use Veritas File system and Veritas CFS.
I would like to ask, Do I must need SFRAC to configure Oracle 10g RAC or Can I just use only Oracle CRS. I do not want to use ASM.
Please advise
Thanks,
Sam..

The VCFS usually requires a Veritas Cluster, thus you would have to use the product combination that is bundled as SFRAC as mentioned before. Metalink in addition says:
10 10gR2 64-bit Veritas Storage Foundation for Oracle RAC 5.0 Certified
There is one exception to this rule: Linux.
Veritas and Oracle support a standalone version of the Veritas Cluster Files System (and only this component) on Linux. This does not hold true for Solaris.
Concluding, if you want to use the VCFS you would need to get a VCS, which then basically means using SFRAC.
However, in this case, as mentioned before, you would not need ASM.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to maintain Data availability in Oracle 10g RAC when LOADING the data?

Hi
we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
Our doubt is when loading the data into RAC server, will it affect the application?
coz' we heared that RAC server should be down when we load the data.
Is this correct?
If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
Thanks.

First, is this the same question that a colleague of yours posted in this thread?
Data Load in RAC
Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Oracle 10G RAC - Public & Heartbeat on 1 NIC

Hello all,
actually I am installing Oracle 10G RAC on rhel 4 (4 node cluster). But the Cluster Verification Utility aborts with errors. I checked the configToolAllCommands and tried to run the failed commands manually:
#/opt/oracle/crs/bin/oifcfg setif -global eth0.100/172.18.0.0:cluster_interconnect eth0.728/172.16.128.0:public eth0.498/172.17.1.0:cluster_interconnect
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
Question:
Is it possible to put Public & Heartbeat on one NIC (eth0.728 & eth0.498)
If not is their any workaround for that issue?
Output /etc/hosts
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.18.253.48 eu0266.[company].net cfmaster
172.16.128.11 eu0200.[company].net eu0200
172.16.128.12 eu0201.[company].net eu0201
172.16.128.13 eu0202.[company].net eu0202
172.16.128.14 eu0203.[company].net eu0203
172.18.13.11 eu0200m.[company].net eu0200m
172.18.13.12 eu0201m.[company].net eu0201m
172.18.13.13 eu0202m.[company].net eu0202m
172.18.13.14 eu0203m.[company].net eu0203m
# Private section
172.17.1.11 eu0200-priv.[company].net eu0200-priv
172.17.1.12 eu0201-priv.[company].net eu0201-priv
172.17.1.13 eu0202-priv.[company].net eu0202-priv
172.17.1.14 eu0203-priv.[company].net eu0203-priv
# Virtual section
172.16.128.16 eu0200-vip.[company].net eu0200-vip
172.16.128.17 eu0201-vip.l[company].net eu0201-vip
172.16.128.18 eu0202-vip.[company].net eu0202-vip
172.16.128.19 eu0203-vip.[company].net eu0203-vip
Output install log:
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
eu0203,eu0202,eu0201,eu0200
Checking existence of ONS node application (optional)
Check ignored.
Checking existence of GSD node application (optional)
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
Command = /opt/[company]/oracle/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /opt/[company]/oracle/crs
Configuration directory is set to /opt/[company]/oracle/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/opt/[company]/oracle/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Thanks in advance for your help!
Regards

Tads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Shared Disk Subsystem for Oracle 10g RAC

I am investigating the feasibility of clustering two 220Rs together in an Oracle 10g RAC configuration. Can I use a D1000 disk array for the shared storage between the two nodes? Can you briefly describe how to do it or point me to documentation on how to do it?

hi dstmark,
can you kindly share some information with me? i am thinking of building up a small lab at home using A1000 to build up an Oracle RAC, as a1000 have 2 scsi port and have a build in controller.
but i am unsure about the detail software requirement, as google return some conflict information.
is SUN cluster would be enough? do i need to get something like Veritas Cluster? which may require a license key....
thanks for sharing information.

DELL BLADE Server and Windows 2003 Oracle 10g RAC

Anyone out there sucessfully set up a Windows 2003 Oracle 10g RAC using DELL BLADE Servers and VMWARE configuration?

dear guys
i have 3 database instances running on primary databases.means 3 different sid.now i want to create DR for same.is it possible.how can i do it.its like 3 versions production,trial and development database running on primary under same home.i want to make dr(standby) .so do i follow same proedure for all.
taking backups of all three.creaating pfile for all and then to start recovery for all three.is it possibleYes, It's called RAC but It need to be licensed.
You have a lot of manuals online so check by yourself how to install and configure.

How to configure Oracle 10g RAC on windown sever 2003

Similar Messages

Maybe you are looking for