How to Configure Reciver HTTP Adapter
Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.
Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick
Similar Messages
-
How to configure sender mail adapter
Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu SinghalHi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin -
How to configure Sender IDOC adapter
Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashishhi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin -
How to configure RFC receiver adapter
HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam -
How to Configure Microsoft loopback adapter in windows 2008
Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
CheersHi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks -
How to configure an jms adapter to use ActiveMQ?
Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
java.naming.factory.initial org.apache.activemq.jndi.ActiveMQInitialContextFactory
java.naming.provider.url tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
... 51 more
what should I do? can someone give me a detail resolvent?I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
<import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
<imported-shared-libraries>
<import-shared-library name="apache.activemq"/>
</imported-shared-libraries> -
How to config receiver http adapter for HTTP POST without XML tags ??
Hi All,
Can you please provide some infornation on How to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats.
Is there any option to bypass server authentication on the XI?
If anybody has the same experience or know how to please provide inputs.
Thanx
NavinHi,
you can use xsl mapping for this in which u xtract
the contents only but not the xml tag.
Ranjit -
How to configure the Http sender adapter
Now i have look through the sap lib about the http sender adapter
and i know the url is
http://hostname:port/path?namespace=<...>
&interface=<...>&service=<...>&cmd=T&loaderXML=< message object >&end=yes
My questions are:
1)the path in the URL is "/sap/xi/adapter_plain", if not, what is it?
2)the message payload is right?
any reply is appreciated
Thank you very muchHi Leo,
For a HHTP Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for your receiver say IDoc.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for Idoc. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned . U have to give all the configuration details in the URL.
If you give me your mail id or if you can mail me at [email protected], i can send you a HTTP CLIENT.....In which you need to view the source code and change the username and password to send message to XI.
Regards,
Abhy -
Configuration of http adapter to reach https-URL
I want to configure a http Receiver Communication Channel that is supposed to call a web service with the following URL: https://api.sandbox.ebay.com/ws/api.dll.
I did the following set-up in the http Adapter:
Addressing Type: URL Address
Target host: api.sandbox.ebay.com
Service Number (Port):443 (-> Standard https Port)
Path Prefix: /ws/api.dll
I startet the process and received the following error message in XI:
"ERROR: The requested URL could not be retrieved. While trying to retrieve the URL: "http://api.sandbox.ebay.com:443/ws/api.dll?"The following error was encountered: Zero Sized Reply. Squid did not receive any data for this request."
It seems it is calling the URL via http, not with https.
Can someone tell me how to change the configuration of the http Adapter that it uses https?
Thanx in advance.
AlexHi Alexander,
Create RFC Destination with Connection type G using Tr. Code SM59 in XI System and enter all the parameters like TargetHost,(Target System), ServiceNo(external port)and path prefix. In the tab Logon/Security enter the login info and enable SSL. Run the transaction STRUST to setup client PSE.
For more info on this refer to help.sap.com at the following <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm">link</a>.
In the HTTP Adapter communication channel config in XI ID, Select the Addressing Type as HTTP Destination and in the HTTP Destination field enter the HTTP Destination name you created in the above step.
Hope this helps.
Regards,
Sam Raju -
How to configure the jms adapter
hi all,
i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
thk u all very much.
Regards, PabloHi,
The below URL will help you to understand what is JMS, how to configure and do a testing.
http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
Below will help you to configure the JNDI for JMS
http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
Thanks,
Vijay -
How to configure SFTP seeburger adapter
Hi All,
Has anyone worked with Seeburger adapter? Could someone tell me how to configure it in XI ?
XIerHi XIer,
Check out the following links
http://www.seeburger.com/sftp_xi/
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Best Regards,
Guza
Message was edited by:
liad aharoni -
How to configure Oracle HTTP server
Hi, I installed APEX 3.0 in Oracle 10.2.0.2 database. I installed HTTP server from Oracle 10.2.0 database companion CD. The problem is I am not sure which conf file I need to modify as in the installation document, it only shows steps for how to configure HTTP server 9.0.3/11g/Oracle Application Server 10g. Anybody knows where to get the right doc? Thanks.
Hi,
Configure the Oracle HTTP Server (OHS) from the companion CD is the same for other OHS (apart from OHS 9.x where it uses wdbsvr.app).
So just follow the install guide from
4.4 About Configuring Oracle HTTP Server
http://download-west.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/post_inst.htm#BHAGICFJ
Regards,
Sunny Patel. -
How to Configure Receiver Mail Adapter?
I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
MrudulaI am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" /> -
Configure plain http adapter for receiving message from an external system
Hi,
we use Pi/700.
Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
I have no experiences with HTTP!
In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
I don't know the URL of my XI-system. Is there an transaction code to get this information?
Why do I need a Username/Pasword?
For testing I can use a "http-post test tool" I found here in this forum.
Thank you all for any help!
Regards
WolfgangHi Hummel,
In Exteranl System u have to use these values
name="myhost" value="xiserver"
name="myport" value="8000"
name="mysystem" value="XY_BSservice"
name="myinterface" value="Order_out"
name="mynamespace" value="urn:xi:hcl:powebapp"
name="myqos" value="BE"
name="myclient" value="300"
name="myuser" value="XYZCLNT"
name="mypass" value="xiuser"
Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
In XI U have to create
Data Types : 1) Source Structure data type(from extenal sys)
2) Target structure (where u want to send from XI)
Message Types : 2 with above DT's
Message Interface: 1) Outbound, Async (Order_out)
2) Inbound , Async (for the target sys)
Then Message mapping and Interface mapping as usual..
And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
For sending system no communication channel required...
Hope u will get idea from the above..
Need any further u r welcome..
Regards
Sridhar -
How to configure reciever mail adapter
Hi All,
I have gone through your weblog for configuring reciever mail adapter BY PRASAD ULAGAPPAN.
I have few doubts .
Message protocol == XIALL.
If I am providing my mail address in MAIL ATTRIBUTES-TO parameter
then what do we have to exactly specify in connection parameters.
I want to send a mail from XI to my ID. Suppose my id is [email protected] .
So if I am providing this ID in " TO " parameter then what should I specify in connection parameters
i.e url = ?
user = ?
password = ? (which password to specify , usually we dont require to give password to recieve mails )
Please help me with this.
Waiting for your reply.
Thanks in advanceHi Yomesh,
The below help URL gives explanation for 'Connection Parameters for Mail Server':
http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
You need to provide your mail server details. When you send a mail normally, say from outlook, you configure it to connect to some SMTP/IMAP server, using username/password.
Provide that server details in URL.
If you dont use user/password to connect to it, leave it blank.
Also fill the 'From' mail address.
For eg., if there is a internet connectivity to your XI server, and you want to use SMTP server of yahoo to send out mails, then you can give:
URL: smtp://smtp.mail.yahoo.com
userid: yomeshsharma
password: <your yahoo password>
In this case, both your From & TO details are same.
You can change 'TO' to send to a different mail address.
regards,
Pops V
Message was edited by: Pops V
Maybe you are looking for
-
How can I fix my MacBook Pro? I have a relatively recent model of the MacBook Pro. I’ve been running Mavericks. For the past few days, it has been randomly clicking off by itself, I guess crashing. I would be online or just doings on it, sometimes no
-
Data Load PSA to IO (DTP) Dump: EXPORT_TOO_MUCH_DATA
Hi Gurus, Iu2019m loading Data from PSA to IO: 0BPARTNER. I habe around 5 Mil entries. During the load the control Job dumps with the following dump: EXPORT_TOO_MUCH_DATA 1. Data must be distributed into portions of 2GB 2. 3 possible solutions: -
-
Camera RAW auto tone settings applied to jpegs
I posted this in the Windows Bridge forum, but a camera raw preference controls this so I am also posting here. On jpeg files without any RAW setting applied, Bridge still applies RAW settings to the thumbnails and the preview are thus display incorr
-
Where can I find a full list of FRM Errors for forms 9i?
Where can I find a full list of FRM Errors for Forms 9i? I have installed Forms 9i + the documentation CD but it has very little documentation on forms, just lots of J2EE stuff.
-
I cannot access my function keys without hitting 'fn' key first. How do I fix that?
I have an Envy 17-2090 NR and it has been this way since purchase. I tried pressing and holding the fn key to no avail. This is really agravating as I use function keys in my games and other software all the time. This question was solved. View Solut