How to configure report server in 11g ???
hello experts,
i installed the 11g recently. and start converting the 10g form and report successfully.
i start the web logic service. and my application is running.
in 10g i was running the report from form. but same form is using to call the report
below error is comming.
error: frm 41213: unable to connect report server repsrv1
before call the report i start the web logic service: wls_reports
note: in 10 g i was using the server name as : repsrv1
please help me to find the solution.
thanks
yash
hello,
i tried to access the showjobs but its not accessed.
we installed the 11f g one day before. may be we do not configure the report server.
please help me how to confiogure it?
i am accessing the forms with url:
http://192.168.1.1.2:9001/forms/frmservlet/....
but when trying to access reports server
http://192.168.1.1.2:9001/reports/rwservlet/showjobs
its showing error:
404: not found
thanks
yash
Similar Messages
-
How to configure report server in 9iDS
I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
How should I configure the report server?
Take care,
Tarektarek,
we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
regards,
philipp -
How to configure report server in 10.1.2
Hi all,
I have 10gDEV,AS10G and AS infrastructure on my system.I want to issue the following command to install report server but it is not working "rwserver -install reptest" ..... Any body know how I install this server in 10.1.2.0.2 Rel of 10g...Any idea?????
RegardsYou don't specify your OS, anyway see http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_strt.htm#sthref104
where you can see
Beginning with Oracle Reports 10g Release 2 (10.1.2), running Reports Server as a Windows service is no longer supported (rwserver -install server_name). -
Dear sir
On my XP I TRY TO RUN REPORT WITH REPORT SERVER I GET ERROR
ERR:41213 , CAN YOU HELP ME , HOW TO INSTALL REPORT SERVER IN ORACLE 9I REPORT WITH XPHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How to uninstall Report server
Hi 2 all DBA
plz inform me how to uninstall report server components from application server 10g , or inform me which components is required for report server in application server 10g
ThanksHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How to configure http server in oracle 10g
Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
ArshadHi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph -
How to configure Proxy server on Solaris 10 - SPARC
Hi All
Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
What tool should be used?Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using? -
How to set report server to process 2 reports concurrently?
Dear Sir,
I'm using Oracle9iAS R2 Enterprise edition.
Can the report server be configured to handle 2 concurrent requests?
Reason being our production system, when one big report is being generated, the small report that comes second will need to wait for the first report to finish.
As a result, the users experience slowness in generating the report because it got queued in the report server.
Any way to configure report server to process reports concurrently?
Please advise.
Thanks.Thanks.
Would like to check with you the behaviour of report server when I have set the maxEngine to 2.
Assuming:
I run report A, take 5 minutes to complete.
At the same time (before report A finishes) I run report B, take 1 minute to complete.
Before report B finish, I run report C, which will also take 1 minute to complete.
My questions are,
1. Will report C be queued under 1st report engine or 2nd report engine?
2. Will report C be processed as soon as report B is completed while report A is still generating?
Please advise.
Thanks. -
How to get report Server Name and Environment ID in Report
How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
I'm also using Oracle Application Server 10G.Hi,
Server and envid are the parameters passed along with Reports URL call.
These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
Once trapped, can be printed on Report.
Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
Thanks -
How to Configure Exchange server in EP6.0
Hi
How to configure mailing server in Portal
With Regards
AzharHi Azhar
You can specify your mail server on the Portal.
Go to System Administration -> System Configuration -> UM Configuration.
You will find a field there to specify your mail Server.
You may also have to specify this in the config tool of your WAS Server to enable email notification
Take a look at <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm">this</a> .
Hope that helps.
Best Regards
Priya -
How to run report server in oracle 9i DS
hi..
can any 1 tell me how to run report server in oracle 9i DS
i've installed oracle 9i DS, but don't know how to run
report server.
actually i want to run a report from my form
on button press trigger.. some of the experts r tellin
that 1st u check whether report server is running or not..
so pls tell me how to install report server.
while installing oracle 9i DS, i've given Mail server
as mysmtp.com
Thanks
amithi ..
i've to go in this directory n run
rwserver -install repservername
where repserver name is my mailserver..
this will install reports server
Amit -
How to configure and deploy OAM 11g with DB setup using silent mode
Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip -
How to configure SMTP server for osb 10.3.1
Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something. -
How to configure portal server with the Backend Oracle database
Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************ -
Hello everybody,
I have just installed Developer 10.
Yesterday, I made a report JSP from JDeveloper with the Report Builder, but when I execute the page with the local OC4J Server, the page crashes:
javax.servlet.jsp.JspException: REP-51002: Fail to link to Reports Server central.cie
'central.cie' is the server where i have installed the database and the Oracle9iAS. In fact, I access to the Oracle Enterprise Manager with central:7777
The DB Connection is all right, but I don't know which is
the Report Server.
I don't know how configure the Report Server, if I must deploy in the Oracle Enterprise Manager or if it has one by default.
Please help me as soon as possible because I'm in a hurry. Next week I have a presentation of my project and It's only left the reports.
Thank you very much.1) >>>> but when I execute the page with the local OC4J Server <<
Did you test the report from within builder ? In builder there is a "run to web layout" (a traffic light icon in toolbar). Clicking on it will run the JSP report to web
2) Docs -
see below
In your case see "Publishing reports to web" document.
3) Setup "trace" options for JSP and see in the log files what error you get. Please post them here
In the above document see section 3.3.5
4) Please see in the document the steps to run to JSP
Section 13.1.2
Just to see if you have missed anything
http://web_server.domain_name:port/alias/myreport.jsp?parameters
5) In your BI Reports and FORMS Midtier (Not Infrastructure install) by default there should be a report server running by the name
rep_hostname
For trouble shooting purposes , run a standalone server in the midtier
rwserver server=<any name>
and give
http://web_server.domain_name:port/alias/myreport.jsp?server=server_name&other params
Thanks
Ratheesh
[ All Docs ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Maybe you are looking for
-
Problem with using javascript in interactive adobe form
Hi All, I have a problem when accessing text field value which is present inside a subform using javascript. I tried giving data.page4.sub-5.<fieldname>.rawvalue but its not working. Please provide a solution. Thank you in Advance.
-
Please help me on this issue. I have the latest full size ipad with retina display and want to replace my old hp laptop with it. I currently run an iPod classic and nano from the iTunes on it, but i want to run them off my ipad. Is this possible.
-
Purchase Price Variance (Standard Costing) with Intercompany
We are missing Intercompany transactions in Purchase price variance report. Is there a setup which let's us include these transactions to be captured by PPV report We do have standard costing in all Organizations
-
How to Up load a Java project in the Web Server
Hello friends, Can u please help me to sort out this problem i want to upload my java project ie a web application with some database operations like add,delete,update. I took webspace in the webserver and from the client system i have to upload my A
-
Error in RFC connection service unknow
Hi , Could any one please help me about this? while creating rfc to GRC system ERROR service '?' unknown LOCATION SAP-Gateway on host usatlvs146 / sapgw00 COMPONENT NI (network interface) COUNTER 339