How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

Similar Messages

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How to Configure Cisco ASA 5512 for multiple public IP interfaces

Hi
I have a new ASA 5512 that I would like to configure for multiple public IP support. My problem may be basic but I am an occasional router admin and don't touch this stuff enough to retain everything I have learned.
Here is my concept.    We have a very basic network setup using three different ISPs that are currently running with cheap routers for internet access. We use these networks to open up access for Sales to demo different products that use a lot of bandwidth (why we have three)
I wanted to use the 5512 to consolidate the ISPs so we are using one router to manage the connections. I have installed an add on license that allows multiple outside interfaces along with a number of other features.
Outside Networks (I've changed the IPs for security purposes)
Outside1 E 0/0 : 74.55.55.210 255.255.255.240 gateway 74.55.55.222
Outside2 E 0/2: 50.241.134.220 255.255.248 gateway 50.241.134.222
Inside1 : E 0/1 192.168.255.1 255.255.248.0
Inside2 : E 0/3 172.16.255.1 255.255.248.0
My goal is to have Inside 1 route all internet traffic using Outside1 and Inside 2 to use Outside2.    The problem is I can't seem to do this. I can get inside 1 to use outside 1 but Inside2 uses Outside 1 as well.
I tried adding static routes on Outside2 to have all 172.16.248.0/21 traffic use gateway 50.241.134.222 but that doesn't seem to work.
I can post my config up as needed. I am not well versed in Cisco CLI, I've been using the ASDM 7.1 app. My ASA 5512 is at 9.1.
Thanks in advance for the suggestions/help

I have been away for a while and am just getting caught up on some posts. so my apology for a delayed response.
I find the response very puzzling. It begins by proclaiming that to achieve the objective we must use Policy Based Routing. But then in the suggested configuration there is no PBR. What it gives us is two OSPF processes using one process for each of the public address ranges and with some strange distribute list which uses a route map. I am not clear what exactly it is that this should accomplish and do not see how it contributes to having one group of users use one specific ISP and the other group of users use the other ISP>
To the original poster
It seems to me that you have chosen the wrong device to implement the edge function of your network. The ASA is a good firewall and it does some routing things. But fundamentally it is not a router. And to achieve what you want were a group of users will use a specified ISP and the other group of users will use the other ISP you really need a router. You want to control outbound traffic based on the source of the traffic, and that is a classic situation where PBR is the ideal solution. But the ASA does not do PBR.
HTH
Rick

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How do I request a service for my phone? (SGS5)

Since I've gotten my phone in the beginning of May, I've been trying to figure out how to schedule text messages from the default application "Messages." I've found out that a lot of people that have Verizon do not know about this feature and it's kind of weird to me. My friend just bought the same phone on T Mobile and has this feature, it's also available on AT&T. Before I forget, this is a default feature of the phone. You're supposed to be able to access it by going to Messages>New Messages con at the top right> from the drop down menu you should be able to select "Schedule message."
I've called tech support as well as call my local Verizon stores. Tech support hasn't even heard of it, and one agent mistaken it for a 3rd party app.
Is there any way I can request for this feature to be added in in future updates? I know I can use third party applications, but I would rather use (one) default application. Can anyone explain why some features aren't available between carriers?
I wonder what other features of the phone we're missing..

Call AppleCare. Click on the Contact Support link at the bottom of the page for the phone number. Alternatively, take the computer to your local Apple service center.
There is no online repair request.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How to configure httpd.conf for multiple websites on one webserver

So, right now I have my primary website on a pay-for domain. A friend of mine wants a website and I want to host his and my sites on the same server. For his website, I'll use a DynDNS address.
So, pretty much, I want to be able to go to my domain and get my site and go to his domain and get his site. I've spent hours trying to get VirtualHosts to work, but haven't gotten it to work yet.
PS. In Apache, I have User set to Administrator (my user name).
MacBook Pro 2.16 Mac OS X (10.4.9)

First, set the user back to www or whatever it was. To do namebased virtual hosting, you'll need to change two things. The first is to add a NameVirtualHost directive to /etc/httpd/sites/virtualhostglobal.conf
This is one of the VirtualHost stanzas from my Linux box, you just have to adjust the paths for your machine:
<VirtualHost www.mydomain.com>
ServerAlias mydomain.com
ServerAdmin [email protected]
DocumentRoot /usr/people/httpd/html/www
<Directory /usr/people/httpd/html/www>
Options Includes
AllowOverride AuthConfig
</Directory>
ScriptAlias /bin /usr/people/httpd/cgi-bin/www
ScriptAlias /cgi-bin /usr/people/httpd/cgi-bin/www
</VirtualHost>
Restart Apache and you should be good to go. If there are errors, could you post them from /var/log/httpd/error_log ?
Roger

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

Managing apps for multiple users in one iTunes library

Hi - my wife and I both have iPhones and separate iTunes ID's. We both share music in one iTunes library and sync to the same library. We also backup our phones to that same computer. We have some apps on both phones (for example, Pandora) and when we backup/restore our phones, iTunes apparently will put "my" version of apps on her phone and "her" version of apps on my phone. Afterwards, when I update apps, my phone will ask for BOTH my iTunes ID AND her iTunes ID. Similarly, her phone asks for both her ID and my ID. Presumably, this also uses two of my FIVE authorized devices, which is also a problem.
My question is how can we manage our apps separately on iTunes so that we can get rid of this annoying behavior? It is very common for families to share one common iTunes library, so I don't see why this would be unsupported.
Thanks for any assistance!

Bump

Same JVM for multiple Frames in a web application

Hi guys,
I have a web application that loads an applet during login. Once the login is completed, the web application will display the available functions accessible with a menu on the left frame and the main display page on the right frame. Whenever any form action is perfomed on the right frame, the jvm with the login session seems to exit (java console closes) and the applet will be loaded to prompt the user to login again. The JRE installed on the Windows client is 1.6.0_14 from SUN.
I'm guessing that the different frames are using different JVMs?
Is there a way to use the same jvm for a web application with multiple frames? I want to prevent the case where the user will have to login again.
Thanks for any advice!
- Zen -

I have sort of the same problem
[Identical applets in the same JVM, next generation plugin issue|http://forums.sun.com/thread.jspa?threadID=5396118]
I have submitted a Request for enhancement to SUN to allow forced grouping of applets in the same JVM.
Sort of the opposite of the "separate_jvm" Applet tag parameter.
It seems there is currently no way to do this.
[New Plugin command line args|https://jdk6.dev.java.net/plugin2/jnlp/#COMMAND_LINE_ARGS]
When per-applet JVM command-line arguments are specified, it is likely that the new Java Plug-In will need to launch another JVM instance in order to satisfy them. In other words, it is unlikely that a preexisting JVM instance will have been started with the correct set of command-line arguments to satisfy the current applet's request. The rules for exactly when a new JVM instance is launched to start a given applet are deliberately left unspecified, as this functionality is brand new in the 6u10 release and may need to change in subsequent releases. Here is a rough set of guidelines for the sharing and creation of new JVM instances:
* If the command-line arguments used to start a preexisting JVM instance are a superset of the requested arguments, the preexisting JVM instance will be used.
* If a JVM instance is launched for the "default" set of command-line arguments (i.e., those specified in the Java Control Panel, with no per-applet arguments specified), then this JVM instance will never be used to launch any applet that has even one per-applet command-line argument.
* -Xmx is handled specially: if a preexisting JVM instance was started with for example -Xmx256m, and a new applet requests -Xmx128m, then new applet will very likely be run in the preexisting JVM instance. In other words, -Xmx specifications are matched with a greater-than-or-equal test.
There is no way to "name" a JVM instance used to launch a particular applet and "force" subsequent applets into that JVM instance.
See the section on the separate_jvm parameter to isolate a particular applet in its own JVM instance, separate from all other applets.

How to write perfect refresh function for each module in flex4 web application

hi all,
I am doing web application, i am using 5 modules in that,every module in a single page.
In this application i am using datagrid in last 3 models. the operation is same for the models, select a record from grid then click post it should move to next page.
In that i am writting init() function . this for showing the last module posted records here while i am entering this model.
At the panel initializing time the records loading and showing in the gird,
i written refresh function for this .
But some times the function working properly and show the records in grid.
some time it wont show the records.
refresh function not working properly..
looking for usful suggession,
Thanks,
B.venkatesan.

hi all,
I am doing web application, i am using 5 modules in that,every module in a single page.
In this application i am using datagrid in last 3 models. the operation is same for the models, select a record from grid then click post it should move to next page.
In that i am writting init() function . this for showing the last module posted records here while i am entering this model.
At the panel initializing time the records loading and showing in the gird,
i written refresh function for this .
But some times the function working properly and show the records in grid.
some time it wont show the records.
refresh function not working properly..
looking for usful suggession,
Thanks,
B.venkatesan.

How to configure Rights Management Service with Exchange 2010

Dear All,
We need to configure RMS for file services and exchange 2010 server.
I have windows 2008 r2 as Active directory and exchange 2010 on 2008 r2 server.
please provide any documents or link for configure rms over file services and mail services.
is there require to purchase any license??
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

AD RMS Microsoft Exchange Server 2010 Integration Guide
http://technet.microsoft.com/en-us/library/ee849857(v=WS.10).aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to use simple values services for multiple rows ina table

Hi Frnds...
As per my requirment i need to use SVS for multile rows in a table.
The coding goes like this for getting single attribute which is directly under root context.
objSimpleValueSetCurr = wdContext.getNodeInfo().getAttribute("ctx_attribute");
(this is only for context attribute directly placed under root context in the view controller.)
We need to use value node and a value attribute inside this node. And retrieve the same. so need help regarding the code changes.
Regards,
Sudeep

Hi ,
I had tried out your suggestion. Its not working.
The code goes like this, but the data is not getting populated.
"controller_curr" is the value attribute under the node "InitTable" in the controller which is further mapped to view controller with the same structure.
The data is geting printed through the message manager just before the line
divSMT.put(currency,currency); in this code, at the end.
But "divSMT.put" is not able to populate the data.
_________START________
public void currency( )
    //@@begin currency()
          IWDMessageManager msg = wdComponentAPI.getMessageManager();
          ISimpleTypeModifiable objSimpleTypeCurr = null;
          IModifiableSimpleValueSet objSimpleValueSetCurr = null;
          String currency=null;
          String bandg = null;
          Z_Bapi_Get_Curr_Rate_Input authCurrDet = null; //for FCURR
    Try
authCurrDet = new Z_Bapi_Get_Curr_Rate_Input();
                     wdContext.nodeZ_Bapi_Get_Curr_Rate_Input().bind(authCurrDet);
                          wdContext.nodeZ_Bapi_Get_Curr_Rate_Input().currentZ_Bapi_Get_Curr_Rate_InputElement().modelObject().execute();
IWDAttributeInfo objSimpleValueSetCurr1 = wdContext.nodeInitTable().getNodeInfo().getAttribute("controller_curr");
ISimpleTypeModifiable countryType = objSimpleValueSetCurr1.getModifiableSimpleType();
IModifiableSimpleValueSet divSMT = countryType.getSVServices().getModifiableSimpleValueSet();
int sizeofCurrencyFCURR = wdContext.nodeOPCURROutput().nodeIt_Curr_Rate().size();
msg.reportSuccess("SizeofCurrency FCURR : "+sizeofCurrencyFCURR);
for(int i=0;i<sizeofCurrencyFCURR;i++)
currency = wdContext.nodeOPCURROutput().nodeIt_Curr_Rate().getIt_Curr_RateElementAt(i).getFcurr();
msg.reportSuccess("Currency : "+currency);
divSMT.put(currency,currency);
     catch(Exception e)
//@@end
_________END________
Please look into the issue.
Regards.

How to control explicit language downloads for multiple devices sharing one user id?

I set the parental controls for iTunes on my primary Mac under my account with my user id, etc. My kids have their own devices but we all share the same user id for making purchases. I had erroneously assumed that if I set the parental controls on my device, that it would apply to all purchases using the same id. How can I make the parental controls universal?

These are found at the end of a tutorial on doing what you already have done...
Find out how to use restrictions on your iPhone, iPad, or iPod touch.
Find out how to request and approve purchases with Ask to Buy.
Learn more about about iTunes Store Parental Advisories.
CCC

How do you limit TOC navigation for multiple users on one computer?

If you have 5 Adobe Captivate 5.5. Projects linked together to play consecutively how can you set up a TOC so that each new user starts from the beginning and can only go back to slides that the new user has viewed? We have the TOC set to Enable Navigation, Navigate Visited Slides Only, and View Status Flag. This is a required training video that will be taken by many users. We need them to be able to go back to the sections that they already viewed but not be able to see the sections that others have already watched. In other words, we don't want them to be able to advance ahead to the sections that the previous test takers have viewed.
Message was edited by: DOLOnlineTrainers
Problems:
•     Remove the TOC and they have no navigation abilities to see something they may have missed
•     Keep it in and the viewer can advance to parts they have not viewed as the previous user set the ability
•     Put a back button in and they can only go back one at a time and have no ability to get back to where they were if they keep hitting back other than watch over
•     Tried the clear button in TOC under status flag which clears the status flags yet it only works on one section at a time and does not clear all linked projects
•     Is there something we are missing? Tried reading blogs and really can’t pinpoint problem

To get each user to have a different experience when viewing the content, you need to have some way for each user to be uniquely identified, otherwise the browser has no way of knowing that THIS is not the same person that was looking at the content an hour ago. The way this is normally achieved is by getting users to log in as a different profile.
There's no EASY way I can think of to achieve what you want WITHOUT users having different profiles. You would need to get some custom HTML programming done by someone that basically mimicked separate browser sessions under the same login. It's theoretically possible, but I've never been required to do anything like this.

How do you change the volume for multiple clips in one go?

Hi all,
Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
1. is there a way to only bring in track one only and track two only from the source monitor?
2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but it wont let me.
your help is greatly appreciated
Paul

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

How to configure request manager service for multiple website in one web application

Similar Messages

Maybe you are looking for