How to configure Seeburger adapter

Hi All,
Can you pls guide me on how to configure adapter? and also why do we need mercerator and converstion agent tools along with see burger adapter?
Can't find any doc on how to configure seeburger adapter!!!
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?
Regards,
Ashish

Hi Ashish,
It is similar like other adapters once it is supplied. But take care about security/firewalls settings.
and also why do we need mercerator and converstion agent tools along with see burger adapter?
>>>Not a mandatory to use along with seeburger.
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?Can't find any doc on how to configure seeburger adapter!!!
>>>Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Thanks
Sreeram

Similar Messages

How to configure SFTP Adapter in XI?

Hi All,
How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
Thanks in advance

Hi,
About SFTP .
1) SFTP (Secure File Transfer Protocol)
"SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
SFTP:
As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
Inbound Interface - i.e. third-party system ->XI->SAP:
File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
Outbound Interface i.e. SAP->XI->third-party system:
XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
Pre-Requisites:
Public key should be exchanged between external systems and the PI system.
UNIX shell script has to be developed and scheduled.
Advantages:
Highly Secured.
Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
Disadvantages:
Two-Step process i.e. XI>Temporary folder>External System and vice-versa
Files have to be temporarily stored in XI server.
Multiple failure points i.e. XI and Unix script execution
Maintenance of an external UNIX script.
Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
Note: UNIX shell Script can be executed as a background job or' can be triggered from SAP XI through OS command at File adapter level.
Check the links.
Secure FTP (SSH) with the FTP Adapter
Secured File Transfer using SAP XI
Secure FTP in SAP XI
Regards,
Phani
Reward points if Helpful

How to import seeburger adapter and mdm adapter in sap pi 7.3

Hi all,
how to import seeburger adapter and mdm adapter in sap pi 7.3

Hello
To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
Regards
Mark

How to configure JDBC Adapter(Sender & Receiver)

How to configure JDBC Adapter(Sender & Receiver)
Rgds
Ruchitha

Hi ruchitha thakur ,
These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
JDBC is a technical Adapter provided by SAP.
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
SAP XI Utilize SAP Adapters to connect to heterogenous systems
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
cheers!
gyanaraj
***Pls reward points if u find this useful

How to configure File Adapter (Read)..?

Hi all,
While configuring the Read Adapter in BPEL 11g i am getting not reading any data from given location. But my location are correct.. So please how to configure File Read adapter and give any URL for this ... Thank you

Hi all,
The file adapter it consists many operations like
1: Read
2:Write
3:Synchronous Read
4:ListFiles
So you are asking about Read operation
First you take one File Adapter-->Select Read Operation--->Give Incomming file Location ( In local system you can give like C:/temp/NewDir Or Unix Envornment like you can give /temp/NewDir)
After that you can give file Name like wich format it's incomming file name like CSV.txt or CSV.xml after you give Polling Intervels second or Mintued or Hour.You can select Native format or Define service Later once configure all those things the file adapter configration is done . If you have any doubts in file configrigation please go for the below link...........
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_file.htm#TKADP322

Where do we configure Seeburger adapter in case of outbound?

Hello Freinds,
Can you please help me out where do we configure the Seeburger adapter if the sender is EDI ANSIX12...I mean at what point of time we use this Seeburger adapter to convert to XI Specific XML format?

Hi
seeburger adapter is used when you want to convert an EDI format into the EDI XML format so that it can be uunderstand by the XI, bcoz XI can understand only the XI.
seeburger have povioded following adapters
1.AS2
2.OFTP
3.FTP/VAN
4.X400P7
the selection of the adapter depends on the requirement.
Thanks
Rinku

How to configure FTP Adapter in BPEL PM 10.1.2 Beta3?

Greetings all!
I am working on a legacy integration using BPEL PM. I need to use FTP adapter. There is little information in the Beta Documents on FTP Adapter. Can anyone point me to the right direction on how to configure the FTP Adapter, or where to find the document?
Thanks in advance!

For more documentation please send a mail to [email protected]

How to configure File Adapter along with OS command option

Hello,
I want to configure a scenario using File Adapter with OS command option.
How to use that option in channel configuration of File Adapter.
What is the default path where it is actually runs this OS command?
Thanks,
Soorya

>
surya venkat wrote:
> Hello,
> I want to configure a scenario using File Adapter with OS command option.
> How to use that option in channel configuration of File Adapter.
There are two ways to use the Os command in the file adapter.
Lets talk about the sender File Adapter.
First: Run operative system Before Message Processing
Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
... After Message Processing
After Xi has processed the message, you can trigger a new os level command:
e.g. Trigger a mail, check if the archiving was successful, etc.
> What is the default path where it is actually runs this OS command?
>
Theres no default path, you assign the desired path in the Comm Channel configuration.
> Thanks,
> Soorya
I hope it helps.

How to configure FTP Adapter for multiple endpoints?

Scenario: I have multiple ftp endpoints (5-15) and depending on some business logic, I have to send data to the right destination. With default ftp adapter configuration, I have to add a n adapter connection factory reachable via JNDI for each destination. But I want to read the different endpoints dynamically from e.g. a database and configure my ftp adapter at runtime. That's because the endpoints do change quite often.
Interconnect had such a feature: FTP Sender: The FTP adapter supports sending to multiple FTP endpoints. This feature provides flexibility for sending messages to different remote FTP servers.
Any ideas on that for SOA Suite?
Thanks,
Torsten

For more documentation please send a mail to [email protected]

How to configure flatfile adapter?

I need to configure flat file adapter to load sample data I tried configuring with flatfileactiveSync(csv) reosurce type when I reconcile it says error iterating over objects and failed pls help me on this

Ok.
FF Active sync cannot be reconciled. What to do with this scenario then?
1. FF active sync record processed, IDM object created from the FF as record and an LDAP resource entry created and linked to that IdM object.
2. User changes an attribute in the LDAP resource independently from IdM
3. Why doesnt the FF Active sync correct the attribute by replacing the value from source file on the next cycle?
Answer: it has no means to do so... no reconciliation... it will never be corrected unless or until the source record is changed.
I guess there has to be a method of forcing IdM to process ALL records every cycle to force correctness, However, an occasional recon against the FF and Idm objects would keep things up-to-date and correct.

Seeburger adapter configuration

At my client place they want to send an orders idoc as an EDI document to customer,,Can any one please tell me how to configure seeburger adapter & the mapping for edi.
Advanced Thanks
Kum

Hi sati,
First you need to instal Seeburger BIC and then you should generate the XSD structure of the all yor documents.In Sebbburger BIC mapping designer is generate thes type of all the mappings1)E2X----EDI to XML and X2E ---XML to EDI etc.Seeburger BIC mapping desigener can take care all the tranformatiom of EDI to XML and XML to EDI.once instalitation is finshed, then you can chek with BIC mapping desginer .
Seeburger adapter is the B2B EDI Adapter.Seeburger adapter is also many types adapters:
1)BIC Adapter
2)Split997 adapter
3)AS2 adapter.Based on your usage you have to configure thes adapter.for example
AS2 sender adapte configuration:
1)AS2
2)Asynchor MDN Setting:
a)SSL Certificates and Clint certifactes.
b)SSL host name:HTTP Timeout,MDN Retry interval and MDN Retry count
c)use proxy
AS2 Receiver adapter:
a)HTTP:server ,port ,url and http time out
b)proxy:
c)AS2:Compress,Sign.Encrypt,Sign MDN use proxy and Xi Message
Seeburger Adapter have more funcations:it is very good to Moniter Message.
1)Archiving
2)Message monitor
3)message Spliter
4)Mapping Variable
5)Resource manger
If you nedd any more information regarding the Seeburger ,send your maild then i will send the some more docs to you.
Regards,
Ramesh

How can I configure an adapter to display something on console

Hi,
I am new to OIM and have a very basic question to ask. i have to create a process task,if the value for department field from USR table changes then console should get updated with "department for <uername> has got changed. Also mail should get generated for this activity.
From my knowledge we have to configure an adapter and attach it with process task but not sure how to configure an adapter to perform this task.
Please let me know what should be mentioned in the adapter.
Thanks.

This article may help you
https://support.mozilla.org/en-US/kb/enable-ssl-fix-cannot-connect-securely-error?esab=a&s=SSL+certificate+display+on+Firefox&r=7&as=s
regards,
Gautam sharma.

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

How to configure SFTP seeburger adapter

Hi All,
Has anyone worked with Seeburger adapter? Could someone tell me how to configure it in XI ?
XIer

Hi XIer,
Check out the following links
http://www.seeburger.com/sftp_xi/
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Best Regards,
Guza
Message was edited by:
liad aharoni

How do we do File content conversion using SFTP SEEBURGER Adapter

HI All,
Can we do FCC using SFTP SEEBURGER adapter. If yes how?
XIer

Dynamic attributes are part of the XI message. They provide options for dynamical configuration of SFTP receiver channels (Outbound direction) using parameters that have been dynamically added or set by modules and mappings before the SFTP adapter. These attributes can be set using the Attribute Mapper module for example. Besides, the SFTP adapter dynamically adds specific parameters to the XI message on Inbound case, which can be used by the modules and mappings after SFTP adapter.
Check also
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Naycho

How to configure Seeburger adapter

Similar Messages

Maybe you are looking for