How to configure snmp for oracle

can any one send a document in configuring snmp for oracle

Go to http://tahiti.oracle.com
Search for SNMP
Sybrand Bakker
Senior Oracle DBA

Similar Messages

  • How to configure JBoss for Oracle BPEL Process Manager

    an any body tell me , how to configure JBoss4.0.5 for Oracle BPEL Process Manager?

    http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm

  • How to configure eclipse for Oracle SOA 11gR1 development

    Hi,
    I have installed oracle 11gR1 ( 11.1.1.3.0) and have found that Eclipse (Galileo) as development tool. When I opened Eclipse to create new SOA Project for BPEL development, I could not able to find a SOA Project category. I assume that we need to install plug-in for developing the SOA Project.
    I browse through the site and could not able to locate anything quite useful. Could you please guide me on how to proceed..
    Is Eclipse the strategic development environment for Oracle SOA 11gR1, R2 development.. ?

    http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm

  • How to configure SSL for Oracle Weblogic Server

    Hi,
    Please help me to configure SSL in oracle weblogic server.
    If possible, please provide step by step to configure SSL.

    this should help
    http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

  • SNMP FOR ORACLE 10G?

    Hi all!
    i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
    i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
    CONFIG.master
    CONFIG.encap
    start_peer
    files??? Please let me know if someone has configured that???
    Also, how do you test whether the agent is running on the server or not??

    Hi,
    I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
    I followed all the steps mentioned in:
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
    I'm nto getting any output when I did snmp walk using below command:
    snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
    When I did snmpwalk using below command:
    snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
    output:
    Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
    Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
    Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
    Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
    Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
    This will be a great help to me..
    You can also mail me at [email protected]
    Thanks,
    Ranjeet

  • Configure ASM for oracle Grid installation

    Hi,
    I do not know how to configure ASM for oracle grid infrastructure. As i tried to install oracle grid infrastructure says [INS - 30507] Empty ASM disk group.
    I have to configure Asm before installing 11g R2. Please let me know what i have to do and provide the steps to configure and administer asm.
    Thanks in advance.

    http://docs.oracle.com/cd/E11882_01/install.112/e24660.pdf
    ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox

  • How to configure snmp on solaris 10 for sending traps to any EMconsole

    i am working on solaris management console(smc) .i want to configure snmp for this (smc)to send traps regarding system performance and cpu usage ..can any body know ho to do this .i am new to solaris ..learned some basic administration of it ..

    I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
    Please, someone help or at least paste a link to an article somewhere...

  • How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

    How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
    How many database will play in this role.
    Best,

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • How to configure webutil in oracle application server 10g (9.0.4)?

    hi,
    i want to configure webutil for oracle application server 10g(9.0.4).
    how should i start?
    i have read the webutil mannual.it is bit tricky.
    i want step by step configuration.
    Any sort of help is appriciateable.
    Regards,
    abbasyazdani

    hi,
    In webutil directory structure,there r four folders,
    {color:#0000ff}doc
    java
    server
    webutil{color}
    and there are three files.
    {color:#0000ff}webutil.pll,webutil.old and create_webutil_db
    {color}
    In webutil mannual,it is written that we should extract this folder to forms90.
    But in forms90, there are {color:#0000ff}server and java folders.
    {color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
    what should i do for this ?
    regards
    abbasyazdani
    {color}{color}

  • How to configure snmp on solaris 10

    hi, i am working on solaris management console(smc) .i want to configure snmp for this to send traps regarding my system performance and cpu usage ..can any body know ho to do this

    I could use some help with this as well ... so far I have been unable to find a clear and concise document that can walk me through configurin gSNMP. Clean Solaris 10 installation, snmpdx is running - now how do I configure it? Better yet, how do I disable snmpdx and run net-snmp?
    Please, someone help or at least paste a link to an article somewhere...

  • How to configure SNMP on SG300 using CLI

    Hi,
    Does anyone know how to configure SNMP on the Cisco SG300 switches? I have the SG300-10P. I am not fully familiar with the new command line interface on this device, it was easy on the IOS but finding it a nightmare on this one.
    I put the following command in but it didnt work.
    snmp-server view Interfaces interfaces included
    snmp-server community ACB123 ro 10.x.x.x view default
    I tried to follow the guidelines on the cisco website but thats all Web interface based, i can only access the switch remotely via CLI.
    Thanks

    Hi Rafik, here is a basic snmp v1/v2 configuration
    snmp-server server
    snmp-server community test1234 rw view DefaultSuper
    This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
    -Tom
    Please mark answered for helpful posts

  • How to configure snmp on loopback interface, on vrf TEST, in ASR 9000 series

    Hi there!
    How to configure snmp v2, with community string, for ASR 9000 series, in interface loopback 1, that has vrf TEST
    Regards!

    oh that is somewhat vague, but let me try...
    in order to enable snmp access to an interface in a vrf you need to enable MPP (management plane protection) in that vrf.
    Something like this:
    control-plane
     management-plane
      inband
       interface Loopback100
        allow all
    if you have this and it doesn't work, a config snippet and some debugs (like debug snmp packet) will help to define what to do next.
    regards
    xander

  • How to configure snmp host in IPM?

    Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
    Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
    THANKS FOR ANY HELP!!!!
    Regards
    Enes

    Hi,
    As you've discovered, IPM can help configure
    these traps:
    http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
    But, you'll need to specify a dedicated NMS
    server to receive these traps. The following
    documentation should prove to be useful:
    http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
    http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
    You can use the appropriate "debug" command on
    the router to confirm that traps are, in fact,
    being sent.
    The traps themselves are defined in the
    CISCO-RTTMON-MIB.my and cannot interact
    with the CW2000 syslog analyzer automated
    action.
    Thanks,
    Roger

  • How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

    Hi Every Body,
    1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
    -- I have download all files from e-delivery and check the md5 and all files are OK.
    I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
    2- Was that a problem ?
    -- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
    BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
    even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
    C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
    3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
    thanks in advance.

    Hi,
    Most of the instructions you have mentioned , already was configured.
    except for the tmp and temp directories.
    And even I changed them from System Properties >> Advanced >>  Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
    I attach the conf_VIS.txt file because I thought it may help.
    http://www.4shared.com/document/1bS6aio5/conf_VIS.html
    Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
    Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
    Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

  • How to Configure and Use Oracle's JMS Connector with Tibco EMS

    Jeff,
    I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
    While deployment not able to get the 'TibcoJMSReference',
    As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
    <resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
    could you help to resolve the issue?
    Error
    Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

    Hi,
    I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

Maybe you are looking for

  • How to disable "shift-option" from zooming out in InDesign?

    Hi all, This truly is driving me crazy...how can I disable the "shift-option" shortcut so that I do not zoom out in InDesign? I have searched through the keyboard shortcuts but cannot find where or how to disable this:( I use the shortcut a LOT when

  • Accessibility & User Accounts

    Hi, After all the great help on my first set of questions, and looking around the FAQs etc., I'm back My wife is partially sighted. On my Windows XP system, she has her own user account with certain settings, eg. lower resolution to give larger scree

  • Problem while handling Parent and child nodes in CE

    Hi all I am facing a problem with handling Child and Parent nodes in CE. I have a Table in which I have drop downs. On selecting a value in the drop down, I have to take that value and do some action. I am trying to access the value in the following

  • Dropdown list (predefined list) along with provision for user to enter text

    Hi, Is there any provision in J2ME to have " a drop-down list , which contains predefined variables. if the user does not want to use those predefined variables, then a provision for user to enter text." thanks in advance

  • Registering CS3

    Hi, About two months ago I purchased Adobe CS3 with my student discount when I bought an iMac. I emailed all my student information and they gave me the serial number to activate it, which I did, and I filled out the form to register it. But I never