How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

Similar Messages

How to configure the ST03N and ST06 for displaying the correct data?

Hello guys,
I have just finished a internal project installation following the installation guide.
Our R/3 System can run correctly. However, when I type st03n, it displays some strange data instead of the real server information. and also in st06, I cannot get the real OS information.
The OS collector said that saposcol is not running because of no process id found.
But in the OS level, I've checked the server and saposcol -s said that the saposcol is running correctly.
I searched some notes and modify the processor of the SAPOSCOl service, too. But nothing changes.
I think the ST06 issue is the root cause of the ST03N.
I just wonder that how I could configure the system to make the ST03N or the ST06 display the correct statistics?
Thanks in advance.

I got the answer myself.
I didn't know there were some standard jobs that are required to scheduled for a live R/3 System.
In SM36, find the standard jobs and input 'bc' in sap components and select the jobs scheduling job and set it as periodly run jobs(hourly).
then release the schedule.
And note 16083 has all the information.

How to hide the Columns and Views for Login user in SharePoint 2013

Hi Friends,
How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
Could you please help on this.
Thanks,
Tiru
Tiru

Hello Tirupal,
There is no OOB way to do this.
Please check this codeplex solution to achieve the same.
https://sp2013columnpermission.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configure the sort and port of a SOAP address dynamically

Hi All,
In the wsdl we have the SOAP Address defined but in practice we would like to configure the host and the port. As the server on which the service resides may/will change.
For example:
http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
We would like to configure the proxy to point to say:
http://<host>:<port>//sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
What we see in the Proxy Code is:
port.setSOAPAddress(new com.sap.flex.ws.runtime.SOAPAddress("http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003"));
How could this be achieved.
Please help.

Hi Sumit,
Thanks for the quick response. However, I do not want to change the host and the port in the wsdl. I want it to be so, that it will pick the host and port dynamically(as you have mentioned). However, in out case, the web service has the SOAP address hardcoded as <b>http://usciq74.wdf.sap.corp:50077</b>.
We would want to write something as http://host:port and then let it pick the host and port dynamically. How is that possible.
Best Regards,
Debashree.

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Please help me :How to set the width and height for my View page "test.htm"

Hi,
    I have controller class. When i call the view[test.htm]from this controller class ,i am getting the view with output tableview..it is fine.
My requirement:
             the output view window is showing full browser window. I want the view output like showModeldialog. I want to set the width and height for the output view window. How is possible?
             or
i want to call the test.view in the window.showModelDialog..
Please help me .. Urgent requirement.

Yes you can set the width & Height of the view as follows..
<div style="width:580px; height:750px; margin-top:15px; overflow:auto;">
<htmb:form......>
</htmlb:form>
</div>
<i>*Reward each useful answer</i>
Raja T

How to disable the dashboard and spotlight for the latest Iion OS

How to disable the dashboard and sportlight function in the latest Mac OS?

to disable spotlight, open the terminal and type "sudo mdutil -a -i off" without the quotes. ( You will be prompted to enter your admin password.)
to disable dashboard:
Open Terminal, and then type this command, followed by the Return key:
defaults write com.apple.dashboard mcx-disabled -boolean YES
This tells the system that you no longer wish to have Dashboard available. However, the Dashboard task is actually “owned” by the Dock, so to make your changes take effect, you need to restart the Dock. The easiest way to do that is to type this command into the Terminal (and press Return when done):
killall Dock
After the Dock restarts, hit F12 and you’ll see…nothing at all. If you run Activity Monitor, you also won’t find any Dashboard widgets in the list of tasks, even if you had several open when you ran the above command.

How to configure the Oracle XSL Mapper for schemaLocation attribute?

In the Transformation_1.xsl I need to have the schemaLocation attribute defined as such:
<inc:CaseIncidentReport xsi:schemaLocation="http://caseincidentreport.com/1.0.4 CaseIncidentReport.xsd">
This is fine as long as long as I dont switch to the Design tab. When I switch to the Design tab, Oracle XSL Mapper regenerates the XSL file and renders the root element as
<inc:CaseIncidentReport>
Can some one tell me how to configure Oracle XSL Mapper for schemaLocation attribute? I am using BPEL Designer/JDeveloper Version 10.1.2.1.0 (Build 1915)
Thanks,

What do you mean by normal import? Where can I include the 'schemaLocation' attribute in the Designer? I have no trouble adding the shemaLocation in the source tab but when I switch to the design tab it always stripe it off.
How do I file an enhancement request? I see the the XSL Mapper needs improvements.
Thanks,
Nathan

How to configure the logging and tracing in J2EE-Server

Hi,
when I've been using the SAP Logging and Tracing Framework before from more or less "standalone" Applications I always used a property file which configured the levels of severity etc.. During application startup I've read this file and configured the logging properly.
In a J2EE-Environment (SAP WEB AS JAVA) I cannot read a file from a file - system. So I'm wondering where are those handlers and severity levels are configured ?
Any help is greatly appreciated.
Thanks in advance,
Frank

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to get the salesprice and condition for a customer / material / date

Hi all,
how can I get the correct price and condition for a customer / material / date ?
I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
I'm trying to get the correct price and condition WITHOUT using that BAPI.
Does anyone know how it is possible ? As said before : I have the customer, material and a date.
thanks in advance for your help

Hi
You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
I hope this helps you
Regards
Eduardo

How to get the recipient and Note for recipient in Medium 7 Simple Mail?

Dear friends,
I'm trying to send the shipment in the form of PDF attachment to the assigned user. I'm wondering how can I get the receiver and the note(which should be the content of the email) which can be configured in the "Communication Method"?
Thanks,
YiNing

Well, the maintained text doens't show up as the text of the mail content. So I'm actually asking how can I (from which variant in program) I can get this text. Or is there any standard program shows me how to do this?
Thanks!

What is CPI-C and how to find the username and password for a 4.7c install

Dear Friends,
Please tell me what is a CPI-C username is ??
When do we use it?
And how/from where could I find the CPI-C user name and password of a particular system(4.7c)?
Please give me a detail knowledge.
waiting for replies ....
thx,
jeevan

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How to configure the KMC and Business packages in trail version 7.0

Hi Experts,
I have installed the Sneak Preview version 7.00 SP9 from the sdn.
If i want to start working on the KMC
What i need to install and configure for KMC and collabrations.
If i need to install, where i will get the installables and documentaion.
In the same . I would like to install the business packages also in the same server. where i will get the insallables and related dcoumentation.
R/3 version is ECC6
Regards
Vijay
Regards
Vijay

Dear Samuli,
Thanks for the Replay,
We are using HTTPS and SSL confined but man in the middle types of attack is happening here there using one tool based one there taking the Request and Response.The below given cookie are available in that request.
According to this , set-cookie: JSESSIONMARKID , JSESSIONID and MYSAPSSO2 values are user login time it will change every time are not.
After capturing above response HTTP/1.1 302 etc , when user gives valid credentials and logs in ,
and now ill give wrong password and wrong user id and on click of log on button, i can intercept the request and response coming from the server and when i replace this valid response stil i am able to loggin in to the portal , which should not happen as JESSIONMARKID is changed , server should not allow , but it is loggin in.Standard Login page also allowing to login in this case.
My server version is EP 7.0 SP 12.
Please suggest a solution so that if we restric the hacker at this stage , no matter he can never hijack the sesiona and login with invalid username and password.
Thanks for Advance
Thanks and regrades,
Durga Rao.

How to modify the layout and coding for 'RVORDER01' after copying ..

Hi all,
I am trying to modify standard script layout SALES ORDER for Quotation,
i.e. I had copied standard form 'RVORDER01' to 'ZBAT_RVORDER01'.
and now I am trying to compress the information box. But no box in the layout was selecting while trying to resize it. Can any one help in this issue.
And I also want to know, how to modify the coding in that standard script. i.e. to add a perform statement and etc..
Thanks in advance,
Surender.

GOTO SE71, and give the form name as 'ZBAT_RVORDER01' and Language as DE, try to compress the box according to your requirement, save activate and return to SE71, now change the language to EN, you will see the compressed window in EN.
The casue of your problem is the original language is in DE so window changes, character formats etc can be done in DE language or change original language to english,
TO change original language to EN, SE71 ,FOrm name Language DE click change, goto utilities--> change Language.
Regards,
Sairam

How to configure the runtime and consolidation for a track in CMS.

Similar Messages

Maybe you are looking for