How to configure the wifi access with specific time slot for kids?
how to configure the wifi access with specific time slot for kids?
Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.
Similar Messages
-
How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?
The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.
-
How to configure the .ini file with applet
hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browserHi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu -
How to configure the jdeveloper 11 with .dbc files?
hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
ChelseaYou cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna -
How to configure the server 2012 with NAT settings & 3 public IP addresses
Hi everybody,
I received this from my ISP:
Here's your IP informationMain IP: 70.164.1.165Subnet
Mask: 255.255.255.0
Gateway: 70.164.1.1
DNS1: 68.4.16.30
DNS2: 68.6.16.30
2 additional usable IP's Natted to 70.164.1.165
Usable IP's 70.182.178.97 & 98
Subnet Mask if needed: 255.255.255.252
If you are using one server use 70.164.1.165 as the main IP then add/bind 70.182.178.97 & 98 to the NIC.
For Linux Servers
Network 70.182.178.96
Broadcast 70.182.178.99
If you are using a firewall or router, please make sure you are using 70.164.1.165 on the WAN interface, you can use / NAT 70.182.178.97 & 98 to your server(s).
Main IP can also be natted to your server.
Please make sure shared IP hosting is utilized to conserve IP addresses per ARIN requirements.
I have a Dell server, setup with Server 2012 DataCenter.
I plan to run two VM's running ASP.NET web applications connected using the two additional IP addresses.
I assume I should setup the VM Host to the base address .165 - simple enough no problem and I know how to setup the VM's on their own separate network and I can access the internet - no issues with that.
How do I setup the additional public addresses since they have to pass through the Main address to the correct VM?
I have googled for a few days and my ISP tech people look at me like I want to extract their teeth. Their answer is to sell me a router and set it up. This really does not seem that hard a task.Try maybe below configuration.
VMHOST
NIC1 - 70.164.1.165
NIC2 - 192.168.0.1
255.255.255.0
NIC3 - 192.168.1.1
255.255.255.0
VM1:
Bind VM NIC1 to VMHOST NIC2
NIC1 - IP1:192.168.0.2 255.255.255.0
IP2:70.182.178.97
VM2:
Bind VM NIC1 to VMHOST NIC3
NIC1 - IP1:192.168.1.2 255.255.255.0
IP2:70.182.178.98
On VMHOST set static traces (use Command Line):
ROUTE ADD 70.182.178.97 MASK 255.255.255.255 192.168.0.2
ROUTE ADD 70.182.178.98 MASK 255.255.255.255 192.168.1.2 -
How to configure the virtual path with our web listener
Oracle Apps Version: 11.5.10.2
Oracle database: 10.2
platform: Windows server 2003
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Hi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein -
How-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device
Dear All
I have a 2504 Wireless Controller with multiple radios attached. I currently have a "private" WLAN configured (taking ip from windows server based DHCP of Range 192.1681.0/24 ) and working, but I need to add a Guest/Public WLAN which should take the IP from Other DHCP Configured on Fortigate UTM of range 172.16.0.0/24.
We have one SG300 switch in the office and the rest are basic switches.
Our firewall/router is a Fortigate UTM 240D
Find the attached network diagram for the issue.
Is there a SIMPLE way to enabling guest access that doesn't require VLANS (or are VLANS easier than I'm making them)?
Thanks.
- See more at: https://supportforums.cisco.com/discussion/12473186/how-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device#sthash.aj1XcWI0.dpufComplete these steps in order to configure the devices for this network setup:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html
Configure Dynamic Interfaces on the WLC for the Guest and Internal Users
Create WLANs for the Guest and Internal Users
Configure the Layer 2 Switch Port that Connects to the WLC as Trunk Port -
I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachabilityHey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris -
How do I install and configure the Java Access Bridge?
I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
AdrianYou can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN. -
How to configure the services(WDA) in ESS with EHP7
Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again -
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening? -
How to configure the intensity of my Time Capsule's WIFI signal?
Hey,
I own a TC from late 2009, the Firmware is up-to-date (7.6.4) and I installed it in a new place. The intensity of the WIFI signal is suprinsingly low, significantly lower than the signal of any non-Apple WIFI-router I previously used in the same flat.
I remenber having configured the TC back in 2010 with a lower WIFI-Intensity because I had a very little room and no need for an powerful signal. I probably haven't changed this since than ans this could be the reason why the signal coming from the TC is so low. The problem is that I can't find a way to configure the WIFI-intensity back to normal/ maximum.
Does anybody know a way for OS X Mavericks?
Thanks a lot!There is no change..
Reset to TC to factory.. even if you did alter it, the setting will go back to 100%.. there is nothing else you need do. -
How to know the forms associated with a specific transaction
Hi..
Can anyone please suggest me how to know the forms associated with a specific transaction.
For Example In Finance module.
I came to know from SDN the form associated with F.64 as F140_acc_stat_01.
But i need the steps how to track the form name.
Regards..
VinodhHi,
1.We cann't find the forms associated with a specific transaction.
2.But,based on requirement we can go for the form selection.
3.Suppose in account payable and receivable , we have different forms like customer statement, Dunning and Chek form etc.
4.The functional people can find the form name in SPRO and give the details of the requirement.
5.If u have the output type or formname u can go for the TNAPR and TTXFP tables and u can search for the respect object.
6.For FI u can directly find in the SPRO, by searching it with the form name.
Regards,
If helpful reward with points(Don't forget). -
I have a project on Imovie with pinned audio to the project. I want to know how to stretch the audio to a specific point of the song?
See this Tutorial for how audio works in iMovie. In general, you drag the left or right edge of your audio clip.
You can also use the Clip Trimmer. Click the Gear icon in the music track and select the Clip Trimmer.
http://www.apple.com/findouthow/movies/imovie08.html#audioclips -
Questions in Ad Hoc Query & How to Configure the EEO standard reports
Hi all,
I have a question in Ad hoc query report in HR.
<b>How to:</b> Get a list of the total number of employees included in a particular report at the end of the report. Ex: If i create and run a report for salaried employees, sorted out by company codes, how can i get a sub-total and total no. of employees listed in the report.
I tried Ranked format, but when you print the report it doesn't retain the report name on the top.
-->I have a question regarding the Standard reports for EEO and AAP
<b> How do I</b>
1. Start configuring these report
2. What are the things i should have before configuring it in IMG
If anyone can provide me with some documentation regarding the EEO and AAP report configuration that would be great.
Thanks in advance.....
HarishThis can be done using the security for the Infoprovider, provide the users access to create queries only for that Infoprovider.
Maybe you are looking for
-
Free cases issue + question
I just watched the PC, and Steve said that we would receive free cases. He said that next week Apple would have a site up that allowed you to choose which case you wanted to get for free. Bumpers aren't the only ones that are being given away. There
-
since upgrading to 5.4 on a mac, LR persists in using today's date instead of photo creation date when i use "Date" as part of renaming template. never did this when using 5.3. i rename images on import. Please help if anyone knows how to fix thi
-
Time saved as "00:00:00" for DATETIME item using OADateValidater
Hi All, In OAF Page for MessageTextInput item DataType Property set as "DATETIME". Then it is showing as "DD-Mon-YYY HH:mm:ss" Here requirement is, does not show seconds in that DATETIME item. Written below code String userDateFormat = pageContext.ge
-
Sony Bravia w80 c won't come on
Brand new song Bravia won't come on. Led just flashes white but screen remains blank.
-
External product configurator within a CRM-ERP LORD2 scenario?
Is it possible to use an external product configurator within a CRM-ERP LORD2 scenario? My customer has a running webshop with an own configuration UI (java based) which is connected through badis with the ECC. And now we implemented in SAP CRM the E