How to connect a shotgun mic to my Macbook pro?

I recently purchased the "Audio-Technica ATR-6550 Video Camera Condenser Shotgun Microphone"
(http://www.amazon.com/Audio-Technica-ATR-6550-Condenser-Shotgun-Microphone/dp/B0 02GYPS3M). I need this mic to record audio into Adobe Premiere on my Macbook pro (or on voice memos on my iphone). I'm pretty sure it's a mono mic. However, even with an audio to stereo adapter, none of my apple products recognize that I have connected an external mic. What am I missing? Are their other adapters I should buy (preferably from Amazon)

Hmmm....it should. If it doesn't even show up in System Preferences, no application will see it. Do you have any other devices that you can test the microphone with, for example do you have a video camera you can plug it into and does it work there?

Similar Messages

How to connect my wifi printer to my MacBook Pro

Hello - Could you please advise re: how to connect my HP Deskjet 3050 to my MacBook Pro? I gather I have to connect the printer to my Wifi network first, but the instructions aren't clear for a Mac.
Please help. Thank you -

Mac OS Printing/Fax (any version), OS X Lion, OS X Mountain Lionhttp://www.apple.com/support/osx/
printing in OS X Mountain Lion
http://support.apple.com/kb/HT4670
Configure it directly while connected via USB first generally works.
However here is what Canon support has.
Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro

How to connect an infocus projector LP530 to MacBook Pro

We are trying to run slide show using an older IN focus projector (LP 530). . Our lab top is a 3 year mac book pro . It's not recognizing.

Hello Alliseeisgold2014,
Thanks for using Apple Support Communities.
Please see the troubleshooting steps below to help resolve this issue of your projector not connecting to your MacBook Pro:
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

How to connect an acoustic electric guitar to macbook pro

whats to best way to use an acoustic electric guitar with garage band without a buying additional gear, macbook pro. thanks

"whats to best way to use an acoustic electric guitar with garage band without a buying additional gear"
I record acoustic/electric guitars & vocals to my MacBook Pro (Logic Pro 9) with exteremly good results........ BUT my advice would be, don't spoil a good job for a little expense!
I use a USB audio interface (see link below) that provides facilities for connecting any sort of audio signal and monitor facilities for overdubbing multitracks etc.
There are many such units available, but I would thoroughly recommend the one below.
Good luck...........happy recording!!
http://www.rolandus.com/products/productdetails.php?ProductId=970

IPod 3G how to connect it to my non-firewire macbook pro?

I have an iPod 3G with a firewire cable. My computer is a MacBook Pro 13" 2010 without a firewire port. I have a usb connecting thing from a newer ipod nano but the iPod 3G doesn't connect to the computer nor charge. What should I do?

Dan,
If your MB Pro is a 2010 model it should still have a Firewire 800 port. Since the iPod uses a firewire 400 connector, you'll need to purchase an adapter (FW 800 to FW400) such as this one.
FW800 to FW400 Adapter
B-rock

Connecting an External Mic to a MacBook Pro

Not sure what else to add. Anyway, was just wondering how I would connect an external microphone to the computer. I thought it would work on the line in, but that doesn't work as the voltage from the mic is too small.
Anyway, any toughts?

This may be your answer.
http://www.griffintechnology.com/products/imic/
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
Note: I receive no compensation for product endorsements.

Connecting a Vocal Mic to a MacBook Pro for garageBand use?

I do a lot of singing and play the guitar and i just got my new mac. Still kind of clueless but it seems like garage band can be a pretty useful recording program sooo i think ill give it a try. But, for anyone who knows what like a livewire advantage standard EXM series microphone cable looks like... there is most certainly no jacks for it on the macbook lol. Just wondering is there any kind of adapter i can buy that will allow me to record with a good vocal mic in garage band rather than the quality lacking built in mic lol.
Please and thankk youuu!!!

"quality"isn't really the issue.
here's an sm57 plugged directly into a mac:
http://thehangtime.com/GB/LeadMic.mp3
and this is with a preamp:
http://thehangtime.com/GB/LeadPreamp.mp3

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

How do I connect an external microphone to a Macbook Pro with Retina display ?

How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

How do i connect three external monitors to a macbook pro?

How do I connect three extrenal monitors to my Macbook Pro?

I have a USB to DVI adapter from kensington. I use to use it to power at 14" display.Moving windows around had some tearing and lag. Typing lagged, but it was use-able. It was fine for displaying diffrent stats. The OS treated it as it would any additional display.
But I found it undesirable for any thing tha requires lots dragging and clicking.
Every so often the device would lock up. At witch point the computer would get stuck trying to detect the USB display. I would have to unplug the adapter, cycle the power on the adapter. And then it would be good for a couple more months.
Also some times after a reboot, the adapter would stop working. I would have to unplug it, and login, and then plug it back in.
Coping file to my USB 2 harddrive seemed to cause more lag to the USB to Video Adapter.
About the idea of dasiy chaining 3 Thunderbolt display tgeother. Apple Thunderbolt Display (27-inch): Connection options for Thunderbolt Macs states the most the current MacBook Pro 15 & 17 inch can currently drive is 2 Apple Thunderbolt Displays.

I don't have a TV ,How connect my apple TV to my macbook pro to watch the programs?

Hi,
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
Thank you

How connect my apple TV to my macbook pro to watch the programs?
You cannot do this.
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
You need a TV.
The MacBook connects tot eh AppleTV wirelessly.
The AppleTV is to play iTunes content from your MacBook on a TV.
"Apple TV gives you access to the best 1080p HD content — including blockbuster movies, hit TV shows, live sports, your music, photos, videos, and more — right on your widescreen TV. You can even play content from your iOS device or Mac on your TV using AirPlay."

Connect my apple tv with my macbook pro

how can I connect my Apple TV to my macbook pro? When I try to select a blue tooth device I get a message error "there was an error connecting to the device"

It connects over your wifi. If you would like to mirror the display open System Preferences > Display > and ensure that airplay mirroring is set to on. First generation Apple TV's do not work with airplay

HT1338 how can i display my screen on my macbook pro to my 55" lg 3d smart tv? I tried Plex and it won't play it on my tv cause it is a tv show bought through iTunes.

how can i display my screen on my macbook pro to my lg 55" 3d smart tv. I tried using plex as suggested by lg but because i purchased the tv show through itunes it will not pick up on plex. It says it can not r

Either buy the $99 Apple TV or
Connect the MBpro to the TV with a HDMI cable.

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

How to connect a shotgun mic to my Macbook pro?

Similar Messages

Maybe you are looking for