How to connect an external display to MacBook Pro Retina using HDMI to VGA Adapter?

I have a Macbook Pro Retina Late 2012 model and I want to connect my LG 19EN33s Monitor to it using HDMI to VGA cable. Can someone please help and let me know how it can be done?

Something like this -> http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011404&p_id=6191&se q=1&format=2 - from MonoPrice may work.
Clinton

Similar Messages

  • How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

    How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

    Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
    What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

  • 24-inch Mid 2007 as external display for Macbook Pro Retina?

    I'm a video editor looking for a new laptop. Tough decisions, but these facts may help my decision...
    Can I use my 24-inch Mid 2007 as external display for Macbook Pro Retina?
    And if so, would the Macbook be able to access the external hard drives that are connected to the iMac? Or do the external hard drives have to be connected to the Macbook Retina?
    Retina's picture quality is just incredible but compared to Macbook Pro non-retina you sacrifice: disc drive, port options, customization, anti-glare screen. And its more expensive. Arghh

    I would use the retina as the primary screen for the canvas and viewer, while putting the browser and timeline on the iMac.
    Apple won't help here. Unfortunately, they leave they're old products in the dust and wouldn't waste time writing an article about connecting a macbook retina to an '07 iMac.
    Thank you for replying though Ralph. The answer has to be out there somewhere.
    N

  • How to drive Two External Displays w/MacBook Pro

    I'd like to drive 2 external 24" displays with my MacBook Pro (MacBookPro5,1 -- mid 2009 I think) and have a couple of questions before I spend the money on the displays:
    1) It appears this can be done based on some of the other threads I've read, but I just want to be sure.
    2) I'll buy matched displays, but what is the max resolution I can drive them at? Just don't want to waste money on resolution I can't use.
    3) What video adapters do I need to use for this?
    Thanks much in advance.
    Message was edited by: rnanderson
    Message was edited by: rnanderson

    The Matrox DualHead2Go DP Edition can drive two 1920 x 1200 displays off the MBP's mini-Displayport:
    http://www.matrox.com/graphics/en/products/gxm/dh2go/
    Note that only the DP Edition, and not the Digital Edition, supports this resolution when used with a unibody MBP.
    Then there are USB video adapters, all or most of which do NOT support 1920 x 1200:
    http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/

  • How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

    How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • Cannot use external Display with MacBook Pro 13

    i bought new mac pro 13 , i bought new macbook pro 13 & tried to connect to external Samsung screen (Sync Master SA300) but failed ihave VGA adapter & VGA cable
    please can any body help me with detailed steps how i can solve this problem

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • How many hours should stop charging the macbook pro retina first before using it?

    How many hours should stop charging the macbook pro retina first before using it?

    There is no requirement to charge for any predetermined amount of time. You can charge at any time, for any amount of time.

  • How can i delete 'other' in my macbook pro retina?

    how can i delete 'other' in my macbook pro retina?

    About “Other”:
    http://support.apple.com/en-us/HT202867
    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
       http://support.apple.com/kb/PH13806
    3. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    4. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    5. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409
    6.Try OmniDiskSweeper. This will give the storage size details of the items.
       https://www.omnigroup.com/more
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Delete the files yo don’t want to keep.
       Be careful. Delete only the files that can be safely be deleted.

  • 2 monitors on MacBook Pro (Retina) using Thunderbolt and HDMI ports?

    I would like to buy a MacBook Pro with a Retina display.  I want to attach 2 external monitors and Ethernet.  I need to use one Thunderbolt port to attach to my (wired) ethernet.
    Can I attach 2 monitors to a MacBook Pro (Retina) using
    1) a mini display port to DVI adapter
    2) a HDMI to DVI adapter?

    Yes, it is possible to run 3 monitors at once on the Retina MacBook Pro (2 connected over Thunderbolt and one over  HDMI).
    Displays used in picture below:
    Retina on laptop @ “best for Retina”
    iMac used as a display @ 2560 x 1440 via Thunderbolt
    iMac used as a display @ 2560 x 1440 via Thunderbolt/DisplayPort
    LG monitor @ 1920 x 1200 via HDMI
    Hope this answers your question.
    http://apple.stackexchange.com/questions/53759/how-many-external-displays-can-i- power-with-the-15-retina-macbook-pro

  • Macbook Pro Retina - Use a wireless keyboard

    Silly question, but I need the answer.  Can the Macbook Pro Retina use the Apple Wireless Keyboard and then doc to a monitor via Thunderbolt?  My idea is just like you would dock a pc, so to speak.  I assume the answer to be yes, but need confirmation.
    Thanks!

    Yes.  You can use an external keyboard and monitor and even close the MBpro lid to operate in clamshell mode.
    Here are the rules for clamshell mode:
    http://support.apple.com/kb/HT3131

  • How tow connect two external displays that are not mirrored and turn of the retina display

    Hello,
    I have two questions:
    1.  Is it possible to use two external displays either mirrored or not and turn off the retina display, and if so how it is done?
    2.  Is it possible to close the MBP and use an external keyboard while using two external displays?
    I am using a music production DAW Persons Studio One-2 Pro and it would be great to be able to have this type of a setup.
    Thank You,
    Breezinabout
    Macbook Pro  15" Retina display I7 2,3mz 500gb SSD late 2013  OSX Yosemite 10.10.1

    Hi Breezinabout,
    The MacBook Pro Late 2013 retina display model will support two external displays. See this specifications page for reference -
    MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications
    Specifically -
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors
    And -
    Thunderbolt digital video output
    Native Mini DisplayPort output
    DVI output using Mini DisplayPort to DVI Adapter (sold separately)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
    You would, if you wish, turn off the internal display by closing the MacBook Pro, which is called "closed-clamshell" mode. It requires you to have an external keyboard and mouse. See this article for further information -
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • External display with MacBook Pro in Lion

    Hello,
       Yesterday I bought a Mac OS X Lion, and I found one annoying feature of the system - working on a MacBook Pro (MBP), and very often use an external display, with that do not use display in the MBP. When connecting an external monitor doing video processing,and this activity I was used by Mac OS X Snow Leopard to open the MBP there wasaccess of air to cool the computer. After installing the Lion was the fact that even at very small opening MBP is switched to internal MBP display. This is the functionality of the Lion off somewhere or somehow set? I looked in Preferences, and I have found nothing. Thank you in advance for information on how to solve this problem.

    I own a mac mini that stays connected to the 52" LCD 120hz in my living room. The image is perfect, and fits just fine. I did a mini-display port to dvi and got a monster cable adapter for dvi to hdmi which too it to my tv. I did have to go into the tv and set the tv to overscan I think on the image to make it fit and you will have to adjust the resolution on the computer. I can say the colors are darker on the tv and this is just due to the nature of the screen size. Newer LED tvs may be better, but mine is only 1 1/2 years old.
    For an external display, just go to the educators link, select your college and you get $100 off. My wife is an educator and I am back in college so it's no hassle. Or they just ask for an ID. I own 2 24" ACD and they are nice. I do photography and a screen calibration is a must. Once done you'll be happy. And docking with the laptop is handy.

  • HT3964 connected new external monitor to macbook pro, was working but now have no power, black screen in laptop. monitor purchased with advice from tech and set up also. Worked fine for an hour and then quit

    Have just connected a viewsonic external monitor to macbook pro 10.6.8, had everything up and running fine for about an hour then the macbook quit. No power (ws running off power source) Have I killed my macbook? Help!

    Aha, all is good.
    I went to Library/ColorSync/Profiles/Displays
    and to home/Library/ColorSync/Profiles/Displays
    and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
    Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
    My display works normally, now.

  • External display and macbook pro

    Is it possible to connect 2 dvi external monitors to a new macbook pro? I am a photographer and want to use 2 displays when I use the macbook omn my desktop. michael

    Apple did actually acknowledge this as a known issue with people running 10.5.2 with the graphics update, and are investigating it. There's some further discussion at this thread:
    http://discussions.apple.com/thread.jspa?threadID=1394449&tstart=0
    Anyway, what worked for me was powering down, connecting my external display, keyboard, etc., powering up, and immediately closing the lid. It seems to behave better now, though I haven't rebooted since, although I have switched back and forth between running with the external display, and running without it, without any problems.

Maybe you are looking for