How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view -  are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
   Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

Similar Messages

  • My Outlook calendar won't sync with my ipod touch and vice versa.  Wherever I input the info is where it stays. Contacts and notes sync but not calendar.

    My iPod Calendar won't sync with my Outlook Calendar and vice versa.  Wherever I input the information is where it stays.  My contacts and notes sync just fine.  Please help.  Very frustrated.  It used to work just fine.  I just upgraded to iTunes 10.2 version.

    I have the same problem since I updated to iTunes 10.2 Sue (I think). For me this was somewhere in January.
    I wasn't sure iTunes was the issue, until I read your post. I tested syncing a note, and that works fine.
    My 2nd generation Ipod Touch runs on IOS 4.2.1. It won't upgrade to 4.3.
    Possibly the synchonisation between iTunes 10.2 and IOS 4.2.1 doesn't work correctly.
    Has somebody else solved this isue? I use both calendars (on iPod Touch and on PC) for work and private matters.
    Otherwise I have to uninstall iTunes 10.2 and downgrade to 10.2.

  • How to link idoc with its corresponding documents and vice versa...

    Hello Experts,
    What are the tables, transactions, etc that can link a certain document(e.g. PO, GR, invoice) to its IDoc and
    vice versa.
    Thank you guys and take care!

    Hi,
    The Message Control parameters from the partner profiles must also match the corresponding
    fields in the output type. These parameters include:
    u2212 Application
    u2212 Partner
    u2212 Partner function
    u2212 Output type
    Tcode  - NACE  (Output Control)
    Tables - SRRELROLES  (Object Relationship Service: Roles)
    Message Control is a mechanism by which documents are output based on certain conditions.
    1) The application id, communication structure and o/p determination procedure are responsible for triggering IDocs corresponding to a particular application document. For this to happen message control settings have to be done.
    2) Message Control u2013 also referred to as output control or conditioning technique u2013 is a cross-application component used as a service program in several areas. The basic concept behind Message control is to generate and manage outputs from an application and control their timings and medium of exchange.
    3) Message control settings can be done via transaction NACE or via transaction NACO.
    4) Starting point in message control in the u201COutput Determination Procedureu201D (Procedure within NACE txn.). Depending upon the configuration setting in SPRO this procedure is determined.
    A procedure defines a set of possible outputs for an application. We can define several procedures for an application, but only one can be configured as
    active (i.e. for a particular transaction document within an application only one procedure will be determined based on configuration settings).
    Eg->
    a) For Delivery (txn. VL01NO) the document type setting in configuration (SPRO -> Logistics Execution -> Shipping -> Deliveries -> Define Delivery types) determines the procedure.
    So whenever we save a document of particular application (of particular application id) and of particular document type, the particular o/p determination procedure is triggered.
    b) For sales, SPRO -> Sales and Distribution -> Basic Functions -> Output Control -> Output Determination -> Output Determination Using the Condition Technique.
    5) In the transaction NACE we can see that corresponding to application id (say u2018V2u2019 (shipping)) various procedures are defined:
    6) Before making the entry of the output type corresponding to a particular procedure, we have to define it with its attributes.
    The output type defines the characteristics and attributes of the output itself. We can access the output types on transaction NACE by selecting an application and clicking the Output type button.
    7) Access sequence defines a sequence in which business rules are checked for proposing an output type. It has following attributes:
    - A set of business rules or conditions.
    - A sequence in which the rules or conditions are checked.
    - A requirement that checks for business rules using ABAP programs.
    - An exclusive or inclusive strategy.
    We can access the access sequences on transaction NACE by selecting an application and clicking the Access Sequences button.
    Business rule 1 is based on SOrg./Distrib.Ch/Division/Customer. Business rule 2 is based on Sales Organization/Customer Number. Each business rule is, effectively, a set of fields defined in a condition table.
    8) Condition table specifies the key fields for a business rule. Hence for Business rule 1 the key is Sales Org., Distribution Channel, Division and Customer.
    9) Condition records are inserted in the condition table. The transaction is evaluated with the key (of the condition table based on business rule) and if the transactional data matches with the condition record the output is proposed.
    Condition records are defined at last.
    10) Several programs and tables are part of Message Control. For EDI, the following tables and programs will frequently be dealt with:
    *NAST - This table has an entry for the processing program used for an output type.
    *TNAPR - This table has an entry for the processing program used for an output type.
    *RSNAST00 - This program is used to process entries in the NAST table.
    *RSNASTED - This processing program exists for each output medium. ALE_PROCESSING is the routine in the RSNASTED program to process ALE outputs.
    11) Final overview of the components used in Message control to propose outputs.
    12) After doing all the settings for message control, the partner profile setting for this ALE scenario needs to be accomplished. We need to add the following entry to the outbound parameters of the partner profile:
    13) One important question that arises at this juncture is, how is the partner profile determined from the output type is case of ALE?
    This is information is stored in table EDP12 (Partner Profile: Outbound with Message Control). Based on the Partner type of receiver (RCVPRT), output type (KSCHL) and Application for message conditions - without value table (KAPPL), the Partner number of receiver (RCVPRN), Outbound process code(EVCODA), Message type (MESTYP) and other related values are determined.
    Regards
    Pugazhenthi.P

  • Connecting multiple CRM systems to one backend R/3 and vice versa

    Hello experts
    Can you tell me whether it is advisable to connect 2 CRM systems to a single backend R/3 and vice versa? Is it recommended by SAP? I require some notes or docs on this. I got some notes on this forum but they are all Internal ones which I am unable to see.
    Please help!
    Warm Regards
    Debolina

    Hi,
    Though SAP does not recommend connecting multiple systems to one ECC backend. But still it has designed a procedure to achieve this.
    Here is the excerpts of the steps required.
    1. Execute report MCRM_SETTINGS for each CRM system connected to the ERP
    system.
    2. Check the entries of the table CRMRFCPAR of the connected ERP system:
    The field REM_LOGSYS should be filled for every entry marked with
    u2018Created by the MCRM reportu2019.
    3. Activate the corresponding consumers in the table CRMCONSUM
    (transaction SM30).
    4. Internal and external number ranges for Business Partners have to be aligned
    manually.
    Hope it helps you!!!!
    Good Luck.
    Pardeep

  • How to convert SOAPEnvelope or SOAPBody to org.w3c.dom.Node and vice versa?

    How to convert javax.xml.soap.SOAPEnvelope or javax.xml.soapSOAPBody to org.w3c.dom.Node and vice versa?If this convertion is very diffcult , how to convert String to org.w3c.dom.Node?
    Thanks a lot

    vj008 wrote:
    while parsing a DOM i want to convert
    org.w3c.dom.Element to xml string and after certain processing on that xml string i want to convert back it to
    org.w3c.dom.Element.[This might help. xml transformations in java. |http://tejaspurohit.blogspot.com/2009/08/xml-transformations-in-java.html]

  • Can't connect iMac/Leopard with Mac Mini/Tiger and vice versa

    This one has got me tearing my hair out.
    I have an Intel iMac running Leopard and a Mac Mini running Tiger on the same Ethernet network. Both run (adjacent) fixed IP addresses with common subnet mask and gateway. Both access the Internet fine through a single router. But can I share files between the two?
    Neither has firewall turned on while file sharing is enabled. I can see each Mac from the other but when I try connecting first I get 'The server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again.' Then on clicking OK I get 'This file server is running on your machine. Please access the volumes and files locally.'
    If I try connecting from Finder using Go - Connect To Server I get this error message 'The Finder cannot complete the operation because some data in "afp://MacMininame" could not be read or written.'
    Although I'm running Leopard on the iMac now, this also used to happen when I ran Tiger too.
    Many thanks - GeoffT.

    Fixed it!
    I have Parallels installed on the iMac and it creates two virtual network adapters (Guest-Host and NAT) in System Preferences/Network. For some reason I'd foolishly contrived to manually configure the Nat adapter to the same IP address as the Mac Mini, hence the point-back to the iMac every time.
    Guess we're all allowed the occasional foul up.....
    GeoffT.

  • Originating File Sharing Mini with Leopard G3 Beige and Vice Verse.

    I guess a sub-heading of this would be connecting to the newest Mac from an older one.
    Here is a problem: I can set up the G3 Beige (running Jaguar) as a file sharing server and very easily connect to it from the a Mac Mini by using top menu Go>Connect to server.
    Where i run into what seems to be impossible is to do the same thing from the G3. Nothing seems to establish a connection. It is always rejected with a no connection error message.
    Both machines are wirelessly connecting through a router. The mini with internal airport and the G3 beige using an external D-link bridge. Both work fine accessing the internet.
    Main reason i wanted to do this is that my Shared Printer is on the Mini and i wanted to print something from the Beige to it.
    Can anybody help, or am i attempting the impossible.

    DEAR Grant Bennet-Adler: Thank you for your last reply. I'm not sure exactly what i did but I was able to connect. To answer your questions:
    IP Addresses are similar. One is ...101 and the other is ...102.
    My router uses DHCP.
    What seemed to fix the problem was going to security>firewall on the MINI and checking
    o Allow all incoming messages.
    Not sure what ODS Agent.app is but it is highlighted as allow incoming vs blocked.
    Both computers "allow personal file sharing"
    On the G3 i was able to connect after a bit of trial and error: On the G3, when i "Connect to Server" i am presented with three choices of servers, one of which is the G3 itself--I wish the system wouldn't remember irrelevance.
    One of the choices is OK and when i checkit i get the ID and Password Dialog--again for ID i am presented with the MINI's name and not my user (Admin) name.
    Change that, type in the password and i am given a list of drives on the folder. That includes any opened from a .img.
    After i open one i then see it on my desktop and can get into it.
    One slight problem: Once into one, i can;t go back to "go to server" to open more. I get timeouts, error messages and other stuff. I have to start over. That also appears to be to include disconnecting the connection to the G3 server that gets set up on the MINI.
    Regards:
    p.s I hven't gotten into Shared Printer although i saw it did show up in the Firewall dialog.I think i have the Canon MP470 Software on the G3 as well as the Mini but i will have to check on it.
    p.p.s. Next thing is to try X PostFacto on the G3 again to try to install a later OS; but this time not making the mistakes that totally messed it up the last time, last year, that i tried it.

  • How to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

    how to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

    Launch iTunes on your Mac, plug your phone in, select it in the sidebar, select what you want to sync under the various tabs, hit the sync button. If the sidebar is not visible, go up to the "View" menu & select "Show Sidebar".

  • How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

    how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

    You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • I had connected my yahoo email account with my apple email and now wish to disconnect this link. How do I do this?

    I had connected my yahoo email account with my apple email and now wish to disconnect this link. How do I do this?

    Open Mail preferences and delete the account. This only removes it from the Mail app and doesn't close out the service.

  • How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

    How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by  Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

    For the detailed list of differences across editions refer this link
    http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

  • How do i create a little network with my i-mac and macbook

    how do i create a little network with my i-mac and macbook

    Hello:
    To give a sensible answer, a little more information is needed.
    I am guessing that you want to set up a wireless network as you have both a desktop and laptop.
    There are some pretty good tutorials/articles in the knowledge base articles.
    Barry

  • HT1766 Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

    Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

    You can share the same Apple ID in
    Settings > iTunes & App Store > Apple ID: here
    But for all other Apple services like:
    FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID.

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

Maybe you are looking for