How to connect Apple TV to Sony a/v receiver

I have my Apple TV connected to my home a/v Sony receiver thru the DVD input. I am using an Hdmi cable. When I try to play music from my iPad using airplay to my Apple TV, the sound cuts in and out. Should I be using an optical digital audio cable also?

No, HDMI should be OK.
You'd only need optical if say the HDMI connection went direct to the TV (say your Sony had no HDMI).
If playing music via Airplay the commonest cause for audio dropouts os poor wifi - either poor signal for iPad or AppleTV, or interference from other equipment (micorwaves, cordless landline phones) - I used to use an older Airplay equivalent to an Airport Express and it there would be frequent bits of silence - this was often triggered by somone using teh microwave in teh house causing wifi interference.
Also consider whether someone else in the house could be using a lot of LAN access/internet access eg downloading, and thus limiting bandwidth available to AppleTV and iPad.
AC

Similar Messages

  • How to connect Apple TV to Sony str-dg800?

    Need to understand how to connect AppleTV 3GL to Sony STR-DG800 A/V receiver.

    Have you used optical audio cable from apple tv to sony?

  • How to connect apple tv to NAD T748 AV Receiver

    Hi All, Trying to connect apple tv to NAD T748 home theatre.
    Any one achieved this?

    Thanks, discovered the only way I could get it to work was to run an HDMI cable from my Apple TV to TV's HDMI 2. HDMI 1 then runs from TV to HDMI out on T748 AV Receiver
    Could not find any reference to HDCP for NAD T748 or TV
    TV = Samsung UA40C6200UMXRD

  • How to connect Apple TV with AT&T Uverse

    Need help pls.  Not sure how to connect Apple TV2 to AT&T Uverse.  I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV.  That part is clear.  But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2.   Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV?  Thank you

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • How to connect Apple TV with an iPad ?

    How to connect Apple TV with iPad ?

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • Connect Apple TV to Sony bravia

    How do I connect.apple tv, generation 2, to sony braveria.

    What is the model number? Connected directly via HDMI securely? What do you see on the screen? Have you navigated to the right input on your TV? Have you tried a different cable and port?

  • How to connect apple tv 2 to pioneer pdp s35

    How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv.  Thanks.

    Welcome to the Apple Community.
    I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

  • How to connect Apple TV when I have run out of HDMI Ports?

    I have a Sony Bravia TV with 3 HDMI Ports - in those I have connected:
    - Sony Home Theater Surround Sound
    - Playstation
    - Sky Digital TV HD Box
    Is there a way to connect Apple TV without disconnecting any of the above? (and without buying a new TV with 4 HDMI ports!)

    lkrupp is correct, the only soution is to add what's called an HDMI switch to your setup.  The HDMI switch normally has 2, 4, 6, or 8 HDMI inputs and one output.  The output goes to your display.  You then select which input you want to choose.In your case, you can do one of two things:
    Connect all your sources to the HDMI switch.  You then select sources via the HDMI switch and you no longer need to change HDMI inputs on your TV.
    Disconnect one of the HDMI sources you have (let's say it's the Playstation) and plug both the Playstation and the APPLE TV into the switch.  In this setup you need to change the input on both the TV and the HDMI switcher.
    The simplest setup in your case is to buy a 4 or 8 port HDMI switch and put all your devices on the switch.  If you are looking for inexpensive HDMI switches, you need to look at Monoprice.  The stuff is all manufactured overseas and can be hit or miss but it's the cheapest that you'll find.  If you feel like you need some guidance and help, then try www.hdtvsupply.com.  They have a good selection and great support.

  • How to connect Apple TV to DVD blu-ray home theatre

    Hi guys, I am planning to buy Apple TV2 and I was wondering is there setup guide for connecting to HDTV and home theatre system. I currently have LG HDTV and LG DVD Blu-ray Home Theatre. They are connected with HDMI 1.3 cable and I had to get optical cable to get sound from TV to Home theatre.
    How is Apple TV fits into that? I have 1 HDMI slot free on TV and 2 HDMI inputs on DVD system.
    I was thinking just to connect Apple TV to DVD via HDMI? Would that put sound on home theatre system?
    Thank you in advance.
    ddrasko

    You have read home theatre manual about playing sound from external device.
    You doesn't need to connect home theatre to tv at all as you have get video from apple tv.
    Connect video output from apple tv to tv(may carry sound along) and optical cable from apple tv to home theatre.
    That will do. You can mute sound of tv(in case hdmi carry sound along) or using other function(on samsung ) and hear from home theatre sound from speakers.

  • How do connect apple tv to bt wifi?

    How do i connect apple tv to bt wifi?

    Welcome to the Apple Community.
    Select your network name and enter your password when prompted.

  • How to connect Apple TV's HDMI to HDTV's DVI connector?

    My TV is equipped with DVI and VGA connector, the issue is how to link Apple TV's HDMI with my TV? DVI connector is for video only!! or I have to link apple TV's HDMI to VGA connector?

    Apple TV only supports HDMI so there is no guarantee with converters. You may also run into issues with HDCP

  • How to connect apple tv2 to receiver

    Apple tv is connected to tv via hdmi - working perfectly. But i would like to connect apple tv to my receiver as well - for surround sound on movies and for streaming audio from the computer.
    My receiver has 3 optical ports in addition to the DVD coax ( CD, CDR and TV) which one do i use to connect from apple tv  - none seem to work.
    Apple TV set to dolby output.
    receiver digital in is turned on
    No sound from the receiver
    Help!

    Welcome to the Apple Community.
    You need to use one of the optical ports.
    Are you sure they are optical ports.
    Are you sure you are matching the input to the output correctly on the receiver.
    Have you tried adjusting the audio out and Dolby digital settings on the Apple TV.

  • How to connect Apple TV to a stereo?

    What is the best way to connect Apple TV to a stereo with only analog audio input?

    Welcome to the Apple Community.
    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • How to connect Apple TV (2g) HDMI to HDTV with only component video input.

    Trying to connect Apple TV (2g) HDMI to HDTV with only component video input.  Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
    The TV is HD, but only has a component input and not HDMI.  Apple TV 2g only has HDMI output.

    google component hdmi converter
    but they are pretty expensive and may not work at all
    and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

Maybe you are looking for

  • Lightroom,Nik plugins and color spaces

    I'm having an issue and not sure who is holding the smoking gun.  I have the Nik ultimate collection installed which covers Lightroom and Photoshop CS5 extended. I work primarily in Lightroom and apply most corrections globally but occasionally i nee

  • LX26 ABC logic

    hi all, We are planning for WM go-live during July month of the year. If we turn on the LX26 report on July, LX26 will propose the counts for the whole year on July base on ABC requirements. We are planning to create a program to complete the WM cycl

  • About MC46 ?

    Hi guys~ I have a question about MC46 for slow moving item. When I run this program, it shows two type of results. The one is only showing the number and the other is showing number with '(No usage)'. What is different between two of them. I have no

  • Define parameters in a LOV

    Hi How can I change the parameters of a LOV? For example the buttons 'find', 'ok' or 'cancel'? It's possible to modify the word 'Find' that appears at the top of it? Thank you

  • I would like to erase all saved passwords for two websites from firefox's memory because I am having problems logging in

    I would prefer not to save any passwords on firefox. Please walk me through steops to have the passwords erased on google, linked in etc.