How to connect database(oracle 10g) and retreive values using poral 10

can anyone help me how to connect to database and retreive values in detail and also please post the sample code if u have any.

Hello
Thanks for your reply
I tried to connect and here is the result: see below
[oracle@ebstailin 11.1.0]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Sat Jul 17 15:35:31 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CONNECT apps/apps
Connected.
SQL>
But still cannot connect using ORACLE SQL Developer
thanks

Similar Messages

How can i get oracle 10g and Xquery

sir,
How can i download Oracle 10g and Xquery.I need it urgently for my project work...
thanks..
somesh

The following link provides a good starting point for your endeavour:
http://www.oracle.com/technology/sample_code/products/forms/index.html

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

How to connect to ORACLE 10g Express Edition using struts?

HI! There
I am using Oracle Jdeveloper as IDE, JBoss as application server, Oracle 10G Express edition as DBMS. As I am new to Struts & Jboss, so Can anybody tell me that How to connect to Database? Please also give Struts-config.xml datasource config too.
If someone can give a set of codes to enter and retrieve the data to/from database it will be really help full for me. Well connectivity with any version e.g. 9i, 10g, 10g XE will do......
Thanks

Well I have already configure a datasource in struts-config.xml as Stated below:
<data-sources>
<data-source>
<set-property property="autoCommit" value="false"/>
<set-property property="description" value="Data Source Config. for SMS"/>
<set-property property="driverClass" value="oracle.jdbc.OracleDriver"/>
<set-property property="maxCount" value="4"/>
<set-property property="minCount" value="2"/>
<set-property property="password" value="password"/>
<set-property property="url" value="jdbc:oracle:thin:@127.0.0.1:1521:XE"/> <set-property property="user" value="sms"/>
</data-source>
</data-sources>
Now the Only problem That I am facing is how to look up this data source from a Java file of Model layer.
Please Guide me further

HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2

Hi,
I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from SCOPEX.WORLD
My Config files:
On Sun Sparc 5.9 where Oracle server is running.
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
Listener.ora file on Windows machine:
TelemetryDB1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_TelemetryDB1 =
(SID_LIST=
(SID_DESC=
(SID_NAME=TelemetryDB1)
(ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
(PROGRAM=hsodbc)
Tnsnames.ora file:
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
HS_FDS_CONNECT_INFO = TelemetryDB1
HS_FDS_TRACE_LEVEL = OFF
We have created DNS with TelemetryDB1.
I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
Please advise me to rectify the error. We've been working for the last couple of weeks.
Regards,
Sunil

Sunil,
You don't need an Oracle ODBC driver.
The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
However, there are a couple of problems with your actual setup -
- the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
- 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
There is more information in the following note available on My Oracle Support (MOS) -
Note.1083703.1 Master Note for Oracle Gateway Products
The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
p10098816_112020_platform_4of6.zip
However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
Have a look at -
Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
But remember this is not a supported version or configuration and you should be using Dg4ODBC.
Regards,
Mike

How to connect to Oracel 10g on RAC setup using JDBC type 4 driver

Hi ,
I am using websphere 5.1.1.0 server as my application server .Can some one please enlighten me on how can I configure my data source for 10g on RAC ( not stand alone ) . Rather I would like how different is it from configuring data source for a standalone database .

Hi,
Maybe this example cut will work for you. It passes and gets
string:
Statement stmt = conn.createStatement ();
CallableStatement cs = conn.prepareCall ("begin ? :=
MyFunction(?); end;");
cs.registerOutParameter(1,Types.CHAR);
cs.executeUpdate();
System.out.println (cs.getString(1).trim());
Robertas
Sudhir Kulkarni (guest) wrote:
: How to call Stored Functions from Oracle.. Does JDBC allow
this
: to do..
: Callable Statement allows only Stored Procedures.
: Does It allow to invoke Database Functions..
: Pl. Explain is there any other way to invoke Database
Functions..
: Thanks in Advance,
: Sudhir Kulkarni
null

Connect Oracle 10g and OWB to SQL Server 2005 in Windows XP

I am unable to create a working connection between Oracle 10g and a SQL Server database. I have followed the instructions in several sources, but when I attempt to connect to the MSSQL database through SQL Plus or SQL Developer, I get the ORA-03135 error. I set up a non-Oracle location in OWB and the connection test was successful but the metadata would not import. Creating an Oracle location with the same parameters produced the ORA-03135 error.
In TNSNAMES.ORA I placed the following definition:
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wgilt1.hsd1.nj.comcast.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSSQL)
(HS = OK)
In LISTENER.ORA I placed the following in the SID_LIST_LISTENER:
(SID_DESC =
(SID_NAME = MSSQL)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = hsodbc)
The inimssql.ora file contains the following:
HS_FDS_CONNECT_INFO = MSSQL
HS_DB_NAME = MSSQL
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = c:\hs_fds_mssql.log
What is missing?

could be a copy paste issue, but please make sure the tnsnames.ora has at least on space in from of each line after the alias.
In addition what is the listener status? Please post the output of lsnrctl status <listener name>.
Need to know also the output of: C:\oracle\product\10.2.0\db_2\bin\hsodbc

How to deploy the Oracle Forms and Reports 10g in Web?

Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
Any one know how to deploy the Oracle forms and Reports in web?
Please help me out. Thanks in advance.
Vimal

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

How to access MYSQL from Oracle 10g and vice versa

I will like to know how do I create a database link between Oracle 10g and MYSQL database on windows. I have been saddled with responsibility of ensuring the communications between the 2 databases and I have searched everywhere on google, I could not find anywhere where this is explain explicitly and made work.
THank you

In general Oracle offers 2 different products to connect from an Oracle database to a MS SQL Server. The first product is for free and it is called
As DG4ODBC is a generic connectivity based on ODBC it allows you to connect to many foreign databases as long as you have a suitable ODBC driver.It for example allows you to read from text files but also connect to foreign databases like MS SQL Server or IBM DB2. Due to this wide variety of foreign data sources tha capabilities of DG4ODBC are very limited. It only supports a few Oracle functions that it can directly map to foreign database equivalents. All other functions will be post processed. Post processing means that ALL records from the foreign table(s) will be fetched into the Oracle database and the result is then processed locally - so depending on the amount of data stored in the foreign database it might take a while.
To be complete here some notes to follow up:
This Oracle support note describes possible options you have to connect to a foreign database:
Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
So you see, to connect from Oracle to MySQL you need to use the Database gateway for ODBC release 11.2 (HSODBC which was shipped with 10g was desupported in march 2008).
The Database Gateway for ODBC 11.2 (=DG4ODBC) license is included in the Oracle database license and it allows you to connect with a suitable 3rd party ODBC driver to a foreign database.
For your MySQL connection you only need to download and configure the MySQL ODBC driver from the MySQL web site. Once you can connect with the ODBC driver you could then download and configure DG4ODBC.
As you didn't post on which platform your Oracle database is installed, here 2 notes for common platforms:
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle (Doc ID 561033.1)
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install (Doc ID 1266572.1)
- Klaus

How to Install oracle 10g and 11g on aix 6.1

Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
Chetan
Edited by: chetan0926 on Jan 11, 2012 2:56 AM

Hi;
Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
I agree Sybrand, Please check installation guide. All your questions will be answered in it
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

How to connect to Oracle database from webdynprojava application

Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.

Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini

How to create dblink between oracle 10G and mysql

I want to create dblink between oracle 10G and mysql
I create it in ECC6.0 using DBCO transaction tcode,which database type can choose?Microsoft sql server?Because there have no mysql item.
I choosed MSS so that I can test it, but it failed,there is an error that 'ORA-12569:TNS:packet checksun failure'.
I configured the oracle tnsnames.ora file like this:
     CW.WORLD =
           (DESCRIPTION =
                (ADDRESS_LIST =
                      (ADDRESS =
                              (COMMUNITY = SAP,WORLD)
                              (PROTOCOL = TCP)
                              (HOST = XX.XX.XX.XX)
                              (PORT = XXXX)
               (CONNECT_DATA =
                    (SID = XXX )
               (HS = ok )
When I tnsping CW,it will fail,like this " TNS-12569:TNS:packet checksum failure"
How can I do.

I want to know if this possible?

How to do automatic start and shut of Oracle 10g and listerner on AIX 6

Hi ,Please help ,how do we do automatic startup and shutdown of Oracle Database and Listener at System Reboot ,I am using Oracle 10G and operating system is AIX 6,Thanks

Hi,
Check this
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#BGBJBAEI
for more ref
http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php
Edited by: CKPT on Jan 7, 2011 1:11 PM

Need to find out a way to figure out how DB2 connect to Oracle and data mirroring etc.

Hi, Gurus,
I just take over a project which source is ICOMS as400 db2 database. Seems data mirro CDC is used to replicate from DB2 to oracle.
I am very new to this datamirror CDC , plus I am new to figure out how db2 connect to oracle, is that through db link or what? or is there tnsnames entry?
I would like anybody in this forum can point me to the right direction.
Thanks in advance.

user9233598, if mirroring/replication from DB2 to Oracle already exists then question is what product is being used? If the product has already been purchased then I do not think it is very likely that management is going to want to purchase another product so I do not see how extra-cost Golden Gate or other Oracle Gateway features apply if those are not currently in use. If Golden Gate or the Oracle Transparent Gateway are in use then you already have your answer
Oracle supports ODBC/JODBC and the replication application on the AS400 likely uses these features or a thick Oracle client as the interface to Oracle.
HTH -- Mark D Powell --

How to connect database(oracle 10g) and retreive values using poral 10

Similar Messages

Maybe you are looking for