How to connect hp pavilion dv2000 to digital TV with HDMI and S-video

I have this HP computer and digital tv panosonic viera 2007  plasma. and i have the cable with one end of VGA and one end of HDMI. I plugged them and try to find input from TV but it did not work. How could I connect them so I could use TV as a bigger monitor.
thanks

Hi,
There are many around, the following one also has audio option:
    http://www.cablechick.com.au/cables/vga-35mm-stereo-audio-to-hdmi-converter.html?gclid=CKGt85eygMICF...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?

    How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?  I assume I would need to use the DVI to Video adapter that came with my computer to connect to my LCD tv.  I'm just not sure which port I should use on the TV.  The HDMI port is being used for digital cable.
    Also, does anyone know if this can be done wirelessly? 

    For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
    With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
    eg
    http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

  • Is there any way to adapt and connect an AppleTV to  30pin Digital Audio with Certified and Made for Ipod/Iphone only declared HiFi like Panasonic SC-PMX5EG-S to listen via Airplay my Digital Audio content only?

    Please advice. I do not like to wire up this box by RCA-Audio jack or any other analog technology
    btw.: Cheap Bluetooth modules do not work on this HiFi reciver and will be detected like: "unsupported device", because it is made for Apple* only...
    Thank you in advanced,
    Kind regards,
    EinerMehr

    The ATV does not connect to dock or lightning connectors.  It connects to a TV or AV receiver.

  • How can you create a playlist with music and music video and play those from same playlist through Apple TV?

    How can you create a playlist on Ipod touch with music and music video,  and play those from same playlist through Apple TV?  I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem.  The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
    I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one.  I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

    I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
    Message was edited by: jpewald

  • How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

    How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

    About Mini DisplayPort to HDMI adapters
    Stefan

  • When i connect my ipad2 to my tv using the hdmi cord for video mirroring, nothing happens! I've tried it on two new and different types of tv's, what gives?

    When I connect my Ipad2 to my tv using the HDMI cord for video mirroring, nothing happens! I've tried it with new and different types of tv's, what gives?

    Do you have the correct input set on the TV, like HDMI 1, HDMI 2, etc?

  • How long will power last on the iphone 5s with 4g and 3g and 2g?

    How long will power last on the iphone 5s with 4g and 3g and 2g?

    I don't think anybody would know the answer to your question.
    Nobody here knows how you use your phone.
    to answer your question test it out yourself.

  • How can I silence the sounds from the Camera, "klick (camera" and "ping (video)"?

    I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.

  • How to I sync my 10.6.8 ical with icloud  and then to my ipad

    How to I sync my 10.6.8 ical with icloud  and then to my ipad

    I find that I can sync fine with Entourage and I cal under Leopard. I can also subscribe to the Leopard I-calendar on another computer (running Tiger). However, the calendar will not go onto a web page as it used to; this is very frustrating for my colleagues! We need a fix here I think.

  • How to connect HP Pavilion to HD TV as monitor

    Bought an HP Pavilion P6204Y approx Dec 2009. Would like to attach the PC to my Panasonic TV as it's monitor (just got rid of cable). PC only has VGA & S out. TV only has S and HDMI in. YouTube says to use DVI to HDMI. Can I add DVI to this PC or am I stuck with VGA to HDMI, or  S to S....are those 2 choices even viable and would the picture quality be any good with either of those options? I have rarely used my PC (prefer laptop for everyday use) and would hate to have to buy a new PC. Thank you, thank you, thank you in advance for any help, advice, guidance, etc. 

    JAR1969, welcome to the forum.
    You can add DVI to the computer, but it means adding a new dedicated video card.  Since most newer mid-level cards require at least 350W to 400W to operate properly, a new power supply unit (PSU) would be necessary.  
    I like OCZ and Corsair PSU's.  Either will provide you with clean, stable power.  Be certain that the PSU that you choose has the appropriate PCI Express power cables to power the card if necessary.
    I like XFX, EVGA, Sapphire and PNY video cards in that order.  This is due to many years using different brands and frequenting enthusiast forums.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • How do I use a push button digital trigger with my 6034E DAQ board?

    I am only a Lab View toddler.
    I am currently using a push button, wired to PFIO/TRIG1 and DGND, with a anolog trigger. However noise is causing my program to be triggered. I was told that a digital trigger would help to reduce the random triggering. How do I create a push button digital trigger?
    Thanks

    implement a schmitt trigger.
    Struggling with Labview wrote in message
    <[email protected]>...
    >I am only a Lab View toddler.
    >I am currently using a push button, wired to PFIO/TRIG1 and DGND, with
    >a anolog trigger. However noise is causing my program to be triggered.
    >I was told that a digital trigger would help to reduce the random
    >triggering. How do I create a push button digital trigger?
    >Thanks

  • How to connect a printer to Airport in WIFI with Windows

    Hi,
    I just would like to know how to connect my printer (Samsung) to my Airport network through WIFI (My computer is working with Windows).
    Thanks

    Well the easiest would be to plug your printer directly into your extreme using either the USB or Ethernet connection.
    Make sure you then install bonjour and use the printer wizard to convert your printer...
    Bonjour Print Services for Windows v2.0.2
    http://support.apple.com/kb/DL999

  • How to connect a EE 4G HUAWEI E5776 to Airport network and share connection

    Help Please!
    We live in a rural area with poor <6MBS down <1MBS Up Broadband. I have purchased a Huawei E5776 on EE in the UK and can get 16MBS down and about 14mps up.
    Now my problem, large house with 1 Aiport Base Station and 3 Express repeaters share the network around the house. Does anybody know how I can get the Huawei on the wireless network so it can be repeated and used throughout the house? PS I also use 3 Apple TV V2 and various other internet devices.
    Many thanks for any help I have tried all I know and guess it might be down to correct use of IP address and router address but as of now Im stuck. Please keep it to the level of advanced amater not IP professional!
    J

    You would need to connect the wireless modem to a Mac equipped with Ethernet and share the WWAN connection over Ethernet.
    OS X Mavericks: Share your Internet connection
    Connect the Ethernet port to the WAN port on the base station. Configure the base station in bridge mode.
    AirPort Utility 6.x: Set up a base station or AirPort Time Capsule as a bridge

  • How to connect to a foreign WS type HTTP with credentials using OSB

    Hello there!
    Im new with OSB and i need to connect to a foreign WS of HTTP type that accept and XML parameter (i use the post method to send it, but now i need to use this OSB system).
    How can i do this connection? if the url has a uri like this: https://center.enterprise.com/xmlrequest/submitXML
    This site also has cgi user and password.
    I hope u can help me to make this connection, thanx so much in advance
    best regards

    Hi Samantha,
    In order to connect UWL you can go ahead with creating  a system with Load Balancing.
    After that go to the Universal Worklist option under the system configuration.
    Provide the details of your system and register it. do not forgot to provide a system configuration group.
    After registering the system go ahead to the Universal Worklist iview and provide the system configuration group name.
    That;s it your worklist is configured. Check the preview and you will be able to see the workflow e-mails over there.
    If you need a document regarding the configuration please drop your e-mail address over here.
    Hope this helps!
    Regards
    Atul Shrivastava

Maybe you are looking for

  • Adding datafile to ASM file system tablespace

    Hi Can some one plz help in writing a script to add a datafile to the system tablespace on ASM filesystems. below is the result of the query .. select file_name, bytes, autoextensible, maxbytes from dba_data_files where tablespace_name='SYSTEM'; FILE

  • External dvd burner for ibook

    I currently have an ibook G4 which has a dvd reader but not a burner. I would like to purchase an external dvd burner to make copies of movies and to back up data. What type of external burner would be best and which software do I need to purchase? T

  • String check problem

    I have a doozy of a problem on my hands. My company has introduced a password policy that every user must me now. Some of my criteria is that a password must contain at least one symbol and at least one number. In 10g I can use REGEXP_LIKE function,

  • How to ADD new Row In ADF Table?

    Hello! I need to insert a row in table when clicking on the "New", can someone help me? Citing some examples? I'm lost. My table is called tableArchive, and I need to add a line on it. This table is a list called listArchive, which is associated to t

  • Hot spot virtual machine error

    Hi, weblogic 6.1 goes down often and the CpWl.out file shows the following error # HotSpot Virtual Machine Error, Internal Error # Please report this error at # http://java.sun.com/cgi-bin/bugreport.cgi # Error ID: 4349254E560E43505000EC 01 # Problem