How to connect Master socket and extension to fibr...

I have just had my fttp service enabled.
I watched the online video on how to connect my phone, and it says that if you don't have the special socket that allows you to switch from copper to fibre, you should just connect the phne to the modem.
I don't have the socket, just a normal phone socket right next to the modem.
How do I connect my extensions? Can I just connect my modem to the socket and go from there, or do I need to do anything else?
Sorry folks, I know very little about this stuff! 

There is a guide here.
http://bt.custhelp.com/app/answers/detail/a_id/37138/related/1
My guess is that you would have to disconnect your extension wiring from the old master socket, and plug it into the Tel 1 socket via a phone splitter, if you need a phone near the fibre modem.
There are a few other FTTP users on this forum, who may be able to give you more advice.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • How to connect my iPhone and iPad to Apple TV

    How to connect my iPhone and iPad to Apple TV

    Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

  • How to connect my iPad and iPhone to my new apple tv ?

    how to connect my iPad and iPhone to my new apple tv ?

    Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.

  • How to connect Template project and Implementation project

    Hi Experts,
         I would like to know how to connect Template project and Implementation project
        in Solution maneger.   Please help.
    Best regards,
       Gaito

    Hey Gaito,
    great. Now that you have a template project, you need to create one or more templates within the project template.
    Go to tab Templates (of your Templ Proj) and activate 'Global Rollout Functionnality' to be able to use the templates.
    Create a new template thanks to button create. Visibility will be set to red 'private'. You ll have to set it to visible so it becomes visible from your implementation project.
    You ll see when trying to do that next message 'No scenarios/configuration structures assigned to the template XXXX'. That means that in SOLAR01 you did not define a scenario that ll be used in template you re trying to create
    In order to do that go to SOLAR01 for template project, select/create scenarios in tab structure and set in column template value of your template (the one you re creating in SOLAR_PROJECT_ADMIN) and in Global Attribute set value t Global
    You l definitely find more info on this in sap document SMI310 (course). I don t know if you can find it on internet
    Hope this helps
    Regards
    Khalil

  • How to load master data and hierarchies from R/3 systems

    HI all,
    how to load master data and hierarchies from R/3 systems.
    Please explain the steps.
    Thanks,
    cheta.

    HI,
    Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
    Generally, the control parameters for data transfer from a source system are maintained in extractor
    customizing. In extractor customizing, you can access the corresponding source system in the source
    system tree of the SAP BW Administrator Workbench by using the context menu.
    To display or change the settings for data transfer at source system level, choose Business
    Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
    Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
    limits can be followed.
    In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
    DataSources. You can determine the size of the data packet, the number of parallel processes for
    data transfer and the frequency with which the status IDocs are sent, for every possible update
    method for a DataSource.
    To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
    In this way you can, for example, update transaction data in larger data packets in the PSA. If you
    want to update master data in dialog mode, smaller packets ensure faster processing.
    Hope this info helps.
    Thanks,Ramoji.

  • How to connect, add delete and modify sqllite data base.

    dear friends,
    i am developing a stand alone project, in that i want to
    store the datas in the local machine using sql lite. Iam new to
    Flex. i know air and flash very well.. any body can help me, how to
    connect, add, delete and modify the data in sql lite. i want to
    store users option in local machine.. i got struct up. i have to
    finish my project...pls..
    thanks and Regards,
    Syed Abdul Rahim

    Hi,
    Please find details on how to access SQL Lite database from
    AIR applications at the URL below.
    http://livedocs.adobe.com/flex/3/html/SQL_01.html
    Hope this helps.

  • 2 master sockets and only one needed

    Hi
    The homes orginial master socket is upstairs in a box room. Downstairs in the extension is another master socket which was installed by my ex-employer for work related matters only.
    The problem I have is that with the Home Hub 3 router being upstairs I cannot get Wifi in the extension which is the one place I need it. I'm trying to weigh up the costs of buying a BT wifi hotspot and extender versus moving the home landline line numberto the master socket in the extension (formerly paid for by the company).
    Any advice at all would be appreciated.
    Many Thanks
    Andy

    Welcome to the forum
    Using one of the BT extenders would work out cheaper, and would not involve Openreach changing the routing, with the possibility that it may go wrong.
    If you can use an Ethernet connection upstairs, then there are cheaper Powerline devices that do not have wifi capability.
    If you decided to add wifi at a later date, then you can always plug in a wireless access point.
    There are some examples on this page http://forumhelp.dyndns.info/networking/netcons1.html
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Distance between Master Socket and Modem for Infin...

    Hi,  I wish to move my infinity modem and wireless router to another room which is about 20 feet from the master socket.
    Will that cabling distance be ok please?  Thx

    Its rj11 not rj45 as its a modem connection rather than a network
    To hide this sig go to http://community.bt.com/t5/user/myprofilepage/tab/user-preferences and uncheck 'View signatures in posts'.

  • How to connect any scanner and cash draw box in retail outlets

    we have JHS 10g oem copy.how can connect with barcode scanner and cash draw box, print invoice over the JHS? is it any pre defined ADF application available in Oracle for retails?

    we have been developing ADF application,we pause development? due to the  connection with cashdraw devices( Point of Sale Devices) over the JSF pages! this is our core issue! how can achieve this goal?
    we have 40+ outlets with CashDrawer with bar-code scanner! those devices should communicate with our ADF application!
    either any such type of devices are compatible with ADF application.please suggest,we can buy.

  • How to connect oracle Database10g and oracle forms 10g

    I installed oracle Database10g and oracle developer suite 10g in different homein my notebook. how to connect these .
    please help me on this issue
    Rajeev

    DEFINE IN THE TNSNAMES.ORA THE STRING CONNECTION TO THE DATABASE
    CONN1 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = sid1)
    )

  • Need to find out a way to figure out how DB2 connect to Oracle and data mirroring etc.

    Hi, Gurus,
    I just take over a project which source is ICOMS as400 db2 database. Seems data mirro CDC is used to replicate from DB2 to oracle.
    I am very new to this datamirror CDC , plus I am new to figure out how db2 connect to oracle, is that through db link or what? or is there tnsnames entry?
    I would like anybody in this forum can point me to the right direction.
    Thanks in advance.

    user9233598, if mirroring/replication from DB2 to Oracle already exists then question is what product is being used?  If the product has already been purchased then I do not think it is very likely that management is going to want to purchase another product so I do not see how extra-cost Golden Gate or other Oracle Gateway features apply if those are not currently in use.  If Golden Gate or the Oracle Transparent Gateway are in use then you already have your answer
    Oracle supports ODBC/JODBC and the replication application on the AS400 likely uses these features or a thick Oracle client as the interface to Oracle.
    HTH -- Mark D Powell --

  • Re: Master Socket and Lightning - who pays?

    ...I didn't know I was responsible for BT carrying out repairs to it's own equipment. A lightning storm blew over our area. Engineer came and replaced a component inside the master socket. A surge arrester I presume. Said he had spent all day repairing patch panels damaged by the storm. Then I got a bill for £100. Ive raised a complaint.
    Ive phoned 4 times and still not had a resolution. The engineer notes say that my equipment was faulty and that my equipment had caused a power surge. Both claims are false. Also, apparently a Mr Morgan was informed of the charges. That's nice, but there's no one with that name at our address. I believe a mistake had been made. Can anyone help?

    This page has some guidance about charges.
    http://bt.custhelp.com/app/answers/detail/a_id/124​39/c/
    If it was one of the new SSFP faceplates, then that is located after the test socket, so the customer would be liable for its replacement cost.
    It looks like this
    There are electronic components in this unit, which are easily damaged by surges.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Well I bought a WiFi router. How to connect old Macs and other things??

    Hi,
    I purchased a WiFi router mainly for my PSP but I also want to connect my Macs wirelessly to my router. What older Macs can connect to it and how? What other stuff can connect to it?
    Thanks

    In about an hour AR is going to start complaining about the cost being too high and wanting cheaper alternatives. The solution to each situation exceeds the value of the computers themselves. Don't bother asking if there is another less expensive way to do it because there is not.
    Expect to pay at least $50 for one.
    For the 8600 there's also a Belkin USB adapter that has OS 9 drivers and I believe there are PCI card wireless adapters that work under OS9 as well (although I can't recall which ones).
    *Proxim Skyline PCI wireless card, that is what WAS sold and worked in 8.6-9.x - they are no longer made and the company was taken over by a larger one that stopped all Mac related support so no new drivers were made.
    *Belkin has drivers for the F5D6050 USB device. They are OK, but not as reliable as one would want. Relative to each other the OSX drivers are better than the OS9 ones.
    *Smart money would buy a wireless bridge.

  • Master socket and BT Infinity.....

    Hi there. Now that my area has got BT Infinity I'm looking to upgrade however the only problem I would have is with the master socket during installation. My master socket is in the hallway by the stairs.  I would not want to have the router set up at the bottom of my stairs in the hallway. I do have another phoneline in a bedroom upstairs that my current ADSL connection uses. Is it possible for me to use this phoneline for BT Infinity? Thanks

    Yup! the engineer will put the master socket where ever you want
    If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

  • How to know the filename and extension of a file in PKCS7  envelope

    Hi! I've a programm that makes a PKCS7 file. I'm enveloping just one file at a time. I want to know if there is a way to know the filename and extension of the file INSIDE de PKCS7 envelope. Because I receive a file that has .p7 extension, but the real document, the one to be decyprted, I don't know its name nor its extension, and I need both for writing it (I will not just invent some name).
    Best regards!

    The construct of the PKCS7 structure you have, is defined in rfc2633. The part defining EncapsulatedContent is introduced in CMS [rfc2639], where no such attribute for a file name is saved in the structure.
    In some occasions, when it is critical, organizations add own object identifier and attibutes to save such descrptivie information as filename and extension.
    A practical approach is, on the signing side, sign the file A.ext to A-ext.p7m resp. A-ext.p7s
    You can not assume a global approach to get back the original filename (if you have no agreement on not the signing peer as above) of the encapsulated data. The reason is, the encapsulated data field is general and it does not neccesarily mean it was a file (a part of a stream or any definite sequence of bytes in general).

Maybe you are looking for

  • Some song genres that no longer exist are still showing on my iPod

    I had some inconsistencies the name of a genre so I changed it. After changing and syncing it to my ipod, the misspelled genre is still there, but when I click on it, it shows the results of the correctly spelled genre. It's an error that only shows

  • How can we do the data migration between Oracle Applications and SAP R/3.

    Hi All, How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system. Provide any 3rd party tools which supports data migration and also pls rpovid

  • V_V2 not processing anything

    Hey sap masters, I am trying to simulate V_V2 process for sales orders. But it just keeps going on and on, without ever giving any results and it basically times out after a few hours. Im on ECC 5. Any suggestions?

  • Report Report Interface

    Hello Gurus. I have a problem configuring RRI, I went to transaction RSBBS and give the name of the query i want to use as sender, i want to jump from this query to a transaction in R/3 (transaction TM00). I configure this, but when i execute my quer

  • How do I get a chart execute on a FUNCTION/PROCEDURE and not just on  query

    So I have the following function. It does return a SQL statement which should populate a stack bar chart: create or replace FUNCTION stacked_repair RETURN VARCHAR2 is l_var VARCHAR2(32767); BEGIN l_var := 'SELECT NULL LINK,to_char(open_time,"YYYY-Q")