How to connect old Apple Cinema Display to new Mac Mini?

Hello,
I'm considering replacing an old Mac Mini with the new model, but I intend to keep on using my old Apple Cinema Display 20" with it. But i'm having some trouble finding the right conversor (it seems there isn't any from Apple...)
Any suggestions?
Thank you.

If by "old" apple cinema the OP is referring to the aluminum displays of the later mac models, then yes, that's a no-brainer, the problem is that if the OP is referring to the "real" old apple cinema displays, which have a DVI-type connection with power included on the same cable, like the displays the former Mac G4 or G5 had, then he needs a ADP to DVI port, which in most cases it cost more than the actual monitor itself.. I guess the OP needs to specify what does it mean by old apple displays or throw in a link to an image..

Similar Messages

  • Can I use an old Apple Cinema Display with new Mac Mini?

    Currently I have an early PowerMac G5 that I bought used recently. It came with an Apple Cinema Display (20", I think - resolution is 1680x1050). The Cinema Display does not have a separate power cord so it must be powered from the PowerMac. My question is this - would I be able to use this monitor with a new Mac Mini - would it be able to power it the same as the PowerMac is currently.
    Thanks in advance for your help. This is the first Mac I have owned since a "Fat Mac" many years ago (one of those with the 9" black and white screen).

    Are you sure you have a 20" CINEMA display? I have 2x 20" CINEMA displays and both have their own power cord (and power brick). Maybe yours is a STUDIO display??? IDK if STUDIO displays worked that way or not, I've never owned one. Anyways, I have a 20" CINEMA display connected to my new Mac mini (early 2009) via the MiniDVI>DVI adapter and it works fine but is powered through the power cord though. I too have a PowerMac G5 (quad) but my PowerMac cannot power the displays without them being plugged in via their power cords. I am thinking you must have a STUDIO display or maybe there was an earlier version of the CINEMA display that could work that way.... idk. Mine were purchased at the end of 2005 along with the PowerMac G5 (quad).

  • How to connect old LED Cinema Display to new iMac

    How to connect old LED Cinema Display (Mini DisplayPort) 
    to new iMac (thunderbolt port)?
    Ideas?

    Just plug it into the Thunderbolt port. That port directly supports mini-DisplayPort screens.
    http://www.apple.com/thunderbolt/
    Regards.

  • How to connect 22" Apple Cinema Display with ADC to Mini DisplayPort?

    What are my chances to connect a 22" Apple Cinema Display with ADC connection to my new MacBook Pro with its Mini DisplayPort? Is there a combo possible of some adapter with some cable for instance?

    You need a Mini DisplayPort to DVI adapter
    <http://store.apple.com/be-fr/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTEwMjYzNzQ>
    followed by a DVI to ADC adapter
    <http://store.apple.com/be-fr/product/M8661Z/B?fnode=MTY1NDA5OQ&mco=MTE0ODUyODQ& s=topSellers>

  • What do I need to connect my apple cinema display to new macbook pro

    what do I need to connect my apple cinema display to new macbook pro?

    2011 macbook pro with TB ->  apple 27" Cinima Display with mini-displayport 
    Does this work natively?  Is there an adapter or workaround? 
    No, not until or if an adaptor becomes available.  See this thread.
    Apple display and Thunderbolt compatibility

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • How to connect a apple cinema display to an imac

    I have a brand new 27 inch iMac. I also own a 30 inch  Apple Cinema Display.  What peripheral adaptor do I need to connect the display to my new iMac?

    Hello,
    Thunderbolt/Mini DisplayPort-> Dual Link DVi cable...
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
    A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
    - Anonymous
    http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115

  • How to connect 20" apple cinema dispay to 17"Mac Pro

    I got a 20"apple cinema display(2004)
    Now I wanna hook it up with my 17"Macbook Pro (2007)
    The problem is that I have 4 cables coming from the display. 2 is compatible with my notebook (USB and firewire), however, the other 2 cable (DVI and power) are not compatible.
    So does anyone know what should I do to correctly connect my notebook to the display? like which kinda of DVI cable and power cable should I buy?
    Thanks a lot~

    The Cinema Display 20 requires a special external (white brick) power supply that should have come with the display. If it didn't, you'll have to look for one on the used market or at third-party retailers. Apple no longer sells it. It's possible that the supply for a Cinema 30 would also work with a 20, but I'm not sure.
    The connector for an external display on a 2007 MacBook Pro is DVI and ought to work with a Cinema 20's DVI connector without the need for any adapter or special cable.

  • HT4614 how do I connect a mac cinema display to a mac mini

    Is it possible to connect both an Apple 30" HD cinema display and an Apple 23" cinema display to a Mac Mini and use both as dual monitors?

    Yes with the current Mac Mini.  Connect the 23" to the Mac Mini's HDMI port with the HDMI to DVI adapter that came with the Mac Mini.
    If the 23" display uses ADC (Apple Display Connector)
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will also need a DVI to ADC adapter.
    <http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2>
    Connect the 30" display to the Thunderbolt port with a Mini DisplayPort to DUAL-LINK DVI adapter.
    <http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • How can I add a second display to my Mac Mini

    How can I add a second display to my Mac Mini (mid 2011). HDTV and standard monitor working simultaneously.

    True ... but that can be tricky.
    Macs can only power so much, and only through approved/proper adapters.
    Running two monitors off a single MDP-to-VGA adapter may not work, because Mac may not nicely exchange-talk the simultaneous signals.
    There is an adapter that will convert a single minidisplayport to two VGA plugs, but that adapter is $100 instead of $30 (for the single) because it has special hardware in the adapter itself to manage the two signals sinultaneously.
    Alternately ...
    Running one through the minidisplayport and one through the HDMI port makes them two separate signals to be processed.

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • I want to connect my old 23" cinema display to new iMac 5K retina

    I have just ordered a brand new iMac with 5K retina display & would like to link up my old 23" Cinema display to it so I can continue to have my dual screen workstation as I have done since 2005.
    I could do with a little advice before it arrives as to what adaptor I will need in order to connect the two.
    I am currently connected to an old 17" MacBook Pro so am unsure of how it will work with the new iMac?
    The old cinema display has a 3-cable configuration (USB / Firewire / DVI cable) connecting from the power adaptor over to my MacBook Pro.

    Hi John
    Thanks for replying,
    My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
    My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
    I was hoping to wirelessly connect.
    The wish is that all my devices can print wirelessly
    What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
    Any other advice
    Thanks
    Regards

  • How to connect Cinema Display A1081 to Mac Mini 2009

    This may seem an obvious question but the problem is that I am currently abroad, having bought a Mac Mini to replace my very old PowerMac G4, so I cant check if the cable that currently connects the old machine to my Cinema Display will also fit into the new Mac Mini.
    Any help or suggestions are gratefully received.

    Just other users here, no replies from Apple itself.
    Besides the included adapter working, there's a MDP to DVI adapter you can buy...
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
    http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT3382/HT3382_4-mdp_ dvi_adapter--001-mul.png
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    512 MB*
    Details:
    *Apple quietly reports that with 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM may be reserved for graphics use.
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

  • Second display from iMac27" (late 2009) miniDisplay Port worked fine until today- now no longer connects to Apple Cinema Display

    Have a configuration of an iMac27" (MAC 27"/4850-512MB PROCESSOR 2.66GHZ QUAD-CORE INTEL CORE I5 Dec 2009 model) and a second screen Apple Cinema Display 2009 model 24"
    The setup with the Apple Cinema Display has been working fine for 3 years and since yesterday the second screen refuses to work.
    Connected it to a MacBookPro and the Apple Cinema DIsplay functions fine sot my conclusion is it is not the Apple Cinema Display's error.
    Could it be that the Mini Display Port on the iMac is somehow broken? Or is there a software fix I need to checkout?
    Thanks for your help on resolving this issue.

    UPDATE:
    As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
    Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
    Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
    Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

Maybe you are looking for