How to connect oracle 10g XE client to XEserver on win XP
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra
The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra
Similar Messages
-
How to connect Oracle 10g from OBIEE on Linux?
- OBIEE 10.1.3.4.0 is running on Cent 5 Linux M1 (*64* bit). My Oracle database is running another similar machine M2.
- I installed oracle 64 bit client on M1 but could not connect to run the report, connection issue. Even nqcmd didn't helped.
- I guess it was because OBIEE is *32* bit application and hence need 32 bit client.
- I tried installing Oracle 32 bit Linux client on M1 but installation fails with some dependency (Not sure if we can install 32 bit client on 64 bit machine)
Q1 - Any suggestion at this point?
Q2 - Is there any way we could connect OBIEE to Oracle via ODBC drivers. I could not found any odbc driver/so file when I wan installed 64 bit client. Any suggestion for this?
Thanks in Advance!The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra -
How to connect Oracle 10g to MySql
hi,
can anybody plz guide me how to connect Oracle with MySql...I was going through official documentation and I found the procedure for connecting with Informix, Sybase and Teradata etc but I could not find for MySql...so can anybody plz guide in this regard...
Thanking youTo connect to a MySQl database the product you have to use is DG4ODBC 11.2. It requires a 3rd party MySQL ODBC driver (64bit on 64bit platforms and 32bit on 3bit platforms). This Dg4ODBC has to be installed in its OWN ORACLE_HOME. Installing it into the database home 10.2 you'll corrupt the database installation.
Before installing DG4ODBC, please make sure your Oracle database release is 10.2.0.4 or 10.2.0.5. If you still have 10.2.0.3 or 10.1.0.5 you have to apply the gateway compatibility patch to your Oracle database release.
More details can be found in the gateway config note available at "My Oracle Support".
The notes are:
- Installing on a 64bit Unix OS:
How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) [ID 561033.1]
- Installing on 32bit linux:
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit [ID 466225.1]
- Installing on Windows:
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit [ID 466225.1] (although it is the 32bit note is is almost similar for a 64bit Windows installation
You can download Dg4ODBC for free from http://edelivery.oracle.com or from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html -
How to configure oracle 10g with clients
Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AMRead the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3 -
How to uninstall Oracle 10g instant client from Windows XP?
Thanks.
http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php
Nicolas.
Oops, maybe link not about instant client... sorry.
Message was edited by:
N. Gasparotto -
How to connect oracle xe to oracl 10g EE 10.1
I have oracle 10g EE 10.1 at server side and would like to use Oracle EE at client side for developing a software in VB.NET 2008. Please tell me about the connectivity related issues and data porting from client to server and server to client at a scheduled intervals (i.e. weekly basis) machines located at far destinations which are connected on intranet.
Thanks,
Binu
Edited by: user12437107 on Jan 11, 2010 8:07 PM
Edited by: user12437107 on Jan 11, 2010 8:09 PMhow can i connect oracle 10g xe client to this server Apart from database home page, e.g. http://<xe server>:8080/apex, you could try easy connect method
SQL> connect username/password@<xe server name or IP address>/xe -
Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine
Hello,
How to Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine using .Net Application.
I have one application which is in .net, i want to connect it with oracle 10g XE and oracle 9.2i Simultaneously.
it always connect only one database which is first in environment variable (path).
please reply.Use SQL*Net or JDBC Connections. Looks like you are connecting using the Bequeathed connections
Christopher Soza
Oracle BI DBA -
HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g
Hi,
My question is HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g. I know how to connect PLUS and VIEWER using a URL. Do i need to install Discoverer Admin. separately on my local machine.
This is very urgent... Please reply.
Thanks in advance for your time and answers.
JayDiscoverer Administrator is a client side tool, you must install it on your machine or even you can install discoverer administrator in your server but you must connect through a connection string which you must enter in your tnsnames
regards -
Error to connect oracle 10g client and designer BO 4.0
hello,
I try to connect oracle 10g client and designer BO 4.0.
I created an ODBC connection to function in the administration tools of data sources but I can not connect once in designer.
I tried using the driver directly oracle designer 10 but I have the same error that is this:
DBD: ORA-12154: TNS: connection identifier specified could not be resolved
someone there had the same concerns?
cordiallyHi,
so it looks like that your TNSNAMES.ORA file isn`t properly configured. Thats why you can connect with the IDT to your Oracle Database.
Your DBA`s should sent you the correct TNSNAMES.ORA file or the entry for your DB prior. After the tnsping works, you will be able to use the IDT properly.
Regards
-Seb. -
How to connect oracle client (xp) to database server
how to connect oracle client to database server
i have following information
--server ip
--port no
--database name.In addition to these parameters you need username and password.
Then you can connect with
sqlplus -L username@//server_ip:port_no/database_name
Yours,
Laurenz Albe -
Hello,
I have written a java program in JDK 1.4 ( Which I have compiled in J++).
I am dont know how to connect oracle ( 9i / 10g) as Backend to my java program.
Please send the code / instructions to connect my backend.
my program includes oracle tables..
Please help me..
thank you
JayanthUse JDBC, but who the hell uses J++ anymore?
-
How to connect oracle form6i or 10g to mysql database
can anyone tell me how to connect oracle forms to mysql database using ODBC connector?
akinHi
this is step by step installation guide
http://download.oracle.com/docs/cd/E11882_01/install.112/e10875/toc.htm
also below link for download
http://www.oracle.com/technology/software/products/database/index.html
hope this helps
Zekeriya -
How to configure Oracle 10g Advanced Security to use SSL concurrently with
How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert adviceRead the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3 -
Hi All,
How to connect the Oracle database using C/C++ on Mac OS X? I have used Instant Client library "instantclient-basic-macosx-10.1.0.3" provided by the Oracle but could not be success. I'm using PowerPC G4, Mac OS X 10.4.9, and XCode version 2.4.1.
Specially Mr Oscar Armanini has done this in C on Mac OS X. Please let me know. I would be very thankful to you.
Thanks,
GhufranHi Ghufran
there are two Metalink Notes on using Instant Client with PowerPc Mac:
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=316497.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCI sample code - cdemo81.c)
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=332588.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCCI sample code - occidml.cpp)
The first Metalink Note uses an OCI examples and it is pasted here below,
in case you don't have a Metalink ID.
The second Metalink Note uses an OCCI example.
I have never used Instant Client (neither on Os X or on other platform),
but I was successful on compiling C programs (no GUI involved) using the
Full Client installed on my PowerBook G4.
I'm a DBA, but I was a developer years ago (about when Oracle 7.3
was considered a giant step forward): I installed the Oracle 10.1 db
(a complicated job for a developer) and I got the Full Client
installed as well, for free, so I was happy to compile one of the demo C sources
(those that you can find in the Oracle Pro*C manuals:
by the way, Oracle Pro*C manuals are really worth reading).
Good luck
Oscar
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.3
Apple Macintosh PowerPC
Goal
This article will show you how to install and configure your 10g Instant Client (IC) Software for the Mac.
It will install the following packages:
the Basic package
the SQL*Plus package and
the SDK package
and then test its connectivity to an Oracle database using SQL*Plus.
It will also show you how to setup and test a sample program, cdemo81.c, that uses the Oracle Call Interface (OCI)
to connect to the database.
The sample program is located under the <Instant_Client>/sdk/demo directory.
Solution1. Download the following three (3) files from the Oracle Technology Network (OTN) website.
You will need an account to do this.
Macintosh OS X 10g Instant Client Software
a. instantclient-basic-macosx-10.1.0.3.zip (32,395,622 bytes)
b. instantclient-sqlplus-macosx-10.1.0.3.zip (326,740 bytes)
c. instantclient-sdk-macosx-10.1.0.3.zip (293,913 bytes)
NOTE: The above three (3) files will be updated as new patches are released for the 10g Instant Client software. 10.1.0.3 or later versions (10.1.0.x) of these files may be used similarly with this article.
2. Save the following text into a file called tnsnames.ora:
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
3. Save the following text into a file called sqlplus_script.sql:
SELECT user FROM dual;
SELECT sysdate FROM dual;
SELECT 'successful ' AS TEST_RESULTS FROM dual;
exit;
4. Save the following text into a file called setup1:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
# ===========================================
# DESCRIPTION
# ===========
# This script will install and configure your 10g Instant Client (IC) Software
# for the Mac. It will install the Basic, SQL*Plus and SDK (OCI/OCCI) packages
# and then test its connectivity to an Oracle database using SQL*Plus.
# Once this script has completed, you will need to run the script SETUP2 to build
# and run the CDEMO81.C sample application located under the <IC>/sdk/demo folder
# in your newly installed Instant Client home.
# NOTE: In order for this script to run successfully, you MUST perform any
# necessary actions required under the SETUP section below.
# SETUP
# =====
# (1) You MUST be in a directoy with ALL of the following files
# BEFORE running this script:
# 1 - instantclient-basic-macosx-10.1.0.3.zip
# 2 - instantclient-sqlplus-macosx-10.1.0.3.zip
# 3 - instantclient-sdk-macosx-10.1.0.3.zip
# 4 - tnsnames.ora (configured properly)
# 5 - sqlplus_script.sql (connectivity test)
# 6 - setup1 (this file)
# 7 - setup2 (will run this file later)
# (2) Edit the TNSNAMES.ORA file and update it with the necessary information
# to connect to a database on your network. Be sure to note the comments
# in this file. You will have to change the following information:
# SERVICE NAME (orcl or orcl.us.oracle.com)
# HOST (database_machine.us.oracle.com)
# PORT (1521)
# SID (orcl)
# (3) Go to the end of this scrip and modify the following line:
# ./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Replace "orcl" with the SERVICE NAME you used in step (2) above.
# (4) To run this script use the command: ". setup1"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
echo
#more setup1
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# remove the instantclient10_1 directory should it exist
echo
echo CHECKING FOR instantclient10_1 DIRECTORY...
echo WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
echo
rm -d -f -R instantclient10_1
# extract the instantclient software (basic, sql*plus & sdk)
echo
echo
echo INSTALLING SOFTWARE...
echo
echo BASIC
echo
unzip instantclient-basic-macosx-10.1.0.3.zip
echo
echo SQL*PLUS
echo
unzip instantclient-sqlplus-macosx-10.1.0.3.zip
echo
echo SDK
echo
unzip instantclient-sdk-macosx-10.1.0.3.zip
# set the following environment variables
# Uncomment if you want a way to find the Instant Client (IC) home quickly
#export IC=$PWD/instantclient10_1
# Dynamic Library path required to use the Instant Client (IC) software
export DYLD_LIBRARY_PATH=$PWD/instantclient10_1
# TNS_ADMIN is required if using the TNSNAMES.ORA file (recommended)
export TNS_ADMIN=$PWD/instantclient10_1
# display the modified environment variables
echo
echo SETTING ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# display all environment variables
#echo
#echo ALL ENVIRONMENT VARIABLES
#echo
#env
# copy the TNSNAMES.ORA to the instantclient directory
echo
echo COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
echo
cp tnsnames.ora ./instantclient10_1/tnsnames.ora
# list the contents of the IC directory to see what has been installed
echo
echo INSTANT CLIENT [IC] DIRECTORY
echo
ls ./instantclient10_1
echo
# SQL*Plus Connectivity Test
# To connect to the database specified in your TNSNAMES.ORA file change the
# SERVICE NAME (i.e. orcl) below to the name of the entry in your TNSNAMES.ORA
# file designating the specific database in which you want to connect to
echo
echo SQL*PLUS CONNECTIVITY TEST
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Alternately, you can connect from SQL*Plus to Oracle without using a TNSNAMES.ORA
# file. You can embed the NAME-VALUE pair of the SERVICE NAME from the TNSNAMES.ORA
# file directly into the connection string making sure to use the proper HOST, PORT
# and SID like so:
#./instantclient10_1/sqlplus scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=database_machine.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
5. Save the following text into a file called setup2:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
# ===========================================
# DESCRIPTION
# ===========
# This script will build and run the OCI sample application CDEMO81.C inside
# your Instant Client (IC) software located under the <IC>/sdk/demo folder.
# NOTE: In order for this script to run successfully
# (A) you MUST have already run the script SETUP1 successfully
# and
# (B) you MUST perform any necessary actions required under the SETUP
# section below.
# SETUP
# =====
# (1) You need to edit the CDEMO81.C application PRIOR to running this script to
# change the connection information. By default, the application will attempt
# to connect as user SCOTT with password TIGER to a local Oracle database using
# the BEQ-LOCAL network protocol. This will not work.
# (A) You need to make sure you have the SCOTT/TIGER schema created in your database.
# If not, have your DBA create it by running the script "SCOTT.SQL" from your
# <ORACLE_HOME>/rdbms/admin folder.
# (B) You need to modify the CDEMO81.C application to connect to the database
# you have configured inside your TNSNAMES.ORA file.
# (i) Open the CDEMO81.C file located under the <IC>/sdk/demo folder.
# (ii) Find the following line of code:
# (void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
# and change the two empty strings to the SERVICE NAME you are using like so
# (void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
# (iii) Save the file.
# (2) You MUST be in the initial directory where you copied all of the files listed
# in script SETUP1. In this same location you will find SETUP2. Run SETUP2 from
# this location.
# (3) To run this script use the command: ". setup2"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
echo
#more setup2
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# output the username, password and service name from CDEMO81.C file to your shell
echo
echo USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
echo
#more ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*username" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*password" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i OCIServerAttach ./instantclient10_1/sdk/demo/cdemo81.c
# display the required environment variables
#env
echo
echo REPORTING REQUIRED ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# move to the sdk/demo directory
cd ./instantclient10_1/sdk/demo
echo
echo CHANGING TO [IC]/SDK/DEMO DIRECTORY
echo
ls
# run demo application
echo
echo ATTEMPTING TO RUN APPLICATION
echo
echo BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
echo
make -f demo.mk
echo
echo
echo INSTANT CLIENT [IC] DIRECTORY...
echo
ls ../..
echo
echo CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
echo
echo - libclntsh.dylib
echo - libocci.dylib
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
echo
echo INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
echo
ls ../..
echo
echo
echo EXECUTING APPLICATION...
echo
cdemo81
echo
echo
# TROUBLE-SHOOTING
# If you receive the following error messages:
# Error - ORA-24327: need explicit attach before authenticating a user
# Error - ORA-03114: not connected to ORACLE
# Then you did not modify the CDEMO81.C application with proper SERVICE NAME
# information. See step 1B under the SETUP section in this script to resolve
# this error.
6. Take all seven (7) files and move them into the same directory on your OS where you want to install the Instant Client software from:
1 - instantclient-basic-macosx-10.1.0.3.zip
2 - instantclient-sqlplus-macosx-10.1.0.3.zip
3 - instantclient-sdk-macosx-10.1.0.3.zip
4 - tnsnames.ora
5 - sqlplus_script.sql
6 - setup1
7 - setup2
7. Open the file tnsnames.ora. Be sure to review the comments in this file. You will have to change the following information to connect to a database on your network:
SERVICE NAME (orcl or orcl.us.oracle.com)
HOST (database_machine.us.oracle.com)
PORT (1521)
SID (orcl)
Save the file.
8. Open the file setup1, go to the end of this script and modify the following line:
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
Replace orcl with the SERVICE NAME you used in Step 7 above. Save the file.
9. You are now ready to install the 10g Instant Client software for Mac OS X. From the location where your seven (7) files reside, issue the following command:
[macosx]/oracle> . setup1
NOTE: Be sure to include the period "." and a space " " before the word "setup1" so all environment variables persist for the current session.
This will install the Instant Client Basic and SQL*Plus software and connect to the database specified in the tnsnames.ora file.
10. Here is the sample output of a successful execution of the setup1 script:
[macosx]/oracle> . setup1
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
CHECKING FOR instantclient10_1 DIRECTORY...
WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
INSTALLING SOFTWARE...
BASIC
Archive: instantclient-basic-macosx-10.1.0.3.zip
inflating: instantclient10_1/classes12.jar
inflating: instantclient10_1/libclntsh.dylib.10.1
inflating: instantclient10_1/libnnz10.dylib
inflating: instantclient10_1/libocci.dylib.10.1
inflating: instantclient10_1/libociei.dylib
inflating: instantclient10_1/libocijdbc10.dylib
inflating: instantclient10_1/ojdbc14.jar
SQL*PLUS
Archive: instantclient-sqlplus-macosx-10.1.0.3.zip
inflating: instantclient10_1/README_IC.htm
inflating: instantclient10_1/glogin.sql
inflating: instantclient10_1/libsqlplus.dylib
inflating: instantclient10_1/sqlplus
SDK
Archive: instantclient-sdk-macosx-10.1.0.3.zip
creating: instantclient10_1/sdk/
creating: instantclient10_1/sdk/demo/
inflating: instantclient10_1/sdk/demo/cdemo81.c
inflating: instantclient10_1/sdk/demo/demo.mk
inflating: instantclient10_1/sdk/demo/occidemo.sql
inflating: instantclient10_1/sdk/demo/occidemod.sql
inflating: instantclient10_1/sdk/demo/occidml.cpp
creating: instantclient10_1/sdk/include/
inflating: instantclient10_1/sdk/include/nzerror.h
inflating: instantclient10_1/sdk/include/nzt.h
inflating: instantclient10_1/sdk/include/occi.h
inflating: instantclient10_1/sdk/include/occiAQ.h
inflating: instantclient10_1/sdk/include/occiCommon.h
inflating: instantclient10_1/sdk/include/occiControl.h
inflating: instantclient10_1/sdk/include/occiData.h
inflating: instantclient10_1/sdk/include/occiObjects.h
inflating: instantclient10_1/sdk/include/oci.h
inflating: instantclient10_1/sdk/include/oci1.h
inflating: instantclient10_1/sdk/include/oci8dp.h
inflating: instantclient10_1/sdk/include/ociap.h
inflating: instantclient10_1/sdk/include/ociapr.h
inflating: instantclient10_1/sdk/include/ocidef.h
inflating: instantclient10_1/sdk/include/ocidem.h
inflating: instantclient10_1/sdk/include/ocidfn.h
inflating: instantclient10_1/sdk/include/ociextp.h
inflating: instantclient10_1/sdk/include/ocikpr.h
inflating: instantclient10_1/sdk/include/ocixmldb.h
inflating: instantclient10_1/sdk/include/odci.h
inflating: instantclient10_1/sdk/include/oratypes.h
inflating: instantclient10_1/sdk/include/ori.h
inflating: instantclient10_1/sdk/include/orid.h
inflating: instantclient10_1/sdk/include/orl.h
inflating: instantclient10_1/sdk/include/oro.h
inflating: instantclient10_1/sdk/include/ort.h
inflating: instantclient10_1/sdk/include/xa.h
SETTING ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
INSTANT CLIENT [IC] DIRECTORY
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
SQL*PLUS CONNECTIVITY TEST
SQL*Plus: Release 10.1.0.3.0 - Production on Fri Aug 19 15:26:08 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
USER
SCOTT
SYSDATE
19-AUG-05
TEST_RESULTS
successful
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
IF THE SQL*PLUS CONNECTIVITY TEST WAS SUCCESSFUL
READ SETUP2 TO CONFIGURE AND RUN THE OCI cdemo81.c SAMPLE
[macosx]/oracle>
11. Once you have obtained a successful execution of the setup1 script, you are ready to configure cdemo81.c to connect to the database you have configured inside your tnsnames.ora file.
Open the cdemo81.c file located under the <Instant_Client>/sdk/demo folder. Find the following line of code:
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
Change the two (2) empty strings to the SERVICE NAME you used in Step 7 above.
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
Save the file.
12. You are now ready to run cdemo81.c. You MUST issue the following command from the initial directory where you copied all of the files in Step 6:
[macosx]/oracle> . setup2
NOTE: Be sure to include the period "." and a space " " before the word "setup2" so all environment variables persist for the current session.
This script will configure your environment, build and run the OCI sample code connecting to the database specified in the tnsnames.ora file.
13. Here is the sample output of a successful execution of the setup2 script:
[macosx]/oracle> . setup2
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
static text username = (text ) "SCOTT";
static text password = (text ) "TIGER";
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
REPORTING REQUIRED ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
CHANGING TO [IC]/SDK/DEMO DIRECTORY
cdemo81.c* demo.mk occidemo.sql occidemod.sql occidml.cpp
ATTEMPTING TO RUN APPLICATION
BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
rm -rf SunWS_cache
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
rm -rf cdemo81 cdemo81.o occidml occidml.o
/usr/bin/gcc -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI cdemo81.c
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o cdemo81 cdemo81.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
/usr/bin/g++ -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI occidml.cpp
In file included from ../include/occi.h:43,
from occidml.cpp:11:
../include/occiData.h:411: warning: use of `long double' type; its size may
change in a future release
../include/occiData.h:411: warning: (Long double usage is reported only once
for each file.
../include/occiData.h:411: warning: To disable this warning, use
-Wno-long-double.)
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o occidml occidml.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
INSTANT CLIENT [IC] DIRECTORY...
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
- libclntsh.dylib
- libocci.dylib
INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
README_IC.htm libnnz10.dylib libsqlplus.dylib*
classes12.jar libocci.dylib ojdbc14.jar
glogin.sql libocci.dylib.10.1 sdk/
libclntsh.dylib* libociei.dylib* sqlplus*
libclntsh.dylib.10.1* libocijdbc10.dylib* tnsnames.ora
EXECUTING APPLICATION...
Enter employee name (or CR to EXIT): LARRY
Enter employee job: CEO
Enter employee salary: 10000
Enter employee dept: 40
LARRY added to the OPERATIONS department as employee number 7974
Enter employee name (or CR to EXIT):
Exiting...
[macosx]/oracle/instantclient10_1/sdk/demo>
14. If you have any problems running this script please open a Service Request (SR) with Oracle Support for further assistance and be sure to upload the output from the script to the SR.
ReferencesNote
332588.1 - How to Install, Configure and Test Oracle 10g Instant Client Basic, SQL*Plus and SDK Packages for Mac OS X (Runs OCCI sample code - occidml.cpp)
Errors
ORA-3114 "not connected to ORACLE"
ORA-24327 need explicit attach before authenticating a user
ORA-12154 "TNS:could not resolve service name" -
C# connect Oracle 10g XE Error
From example
http://www.oracle.com/technology/obe/hol08/dotnet/getstarted-c/getstarted_c_otn.htm
using Oracle.DataAccess.Client; // ODP.NET Oracle managed provider
using Oracle.DataAccess.Types;
string oradb = "Data Source=ORCL;User Id=hr;Password=hr;";
OracleConnection conn = new OracleConnection(oradb); // C#
conn.Open(); <== Connect Error
Error Message "ORA-12154: TNS:could not resolve the connect identifier specified"
From question
How to Connect Oracle Database 10g Express Edition ?
How to entry in your tnsnames.ora file called "ORCL"?
I'm beginner.
Best Regards,Hi,
I posted a reply in the other thread:
Re: Connect Oracle Database 10g Express Edition Error?
Regards,
Mark
Maybe you are looking for
-
2 Classic Reports with edit fields on the same page
Hi All, need your help. I am trying to have 2 classic reports on one page with edit fields like date, list values, text I have noticed that the element indexes are the same f01_0001 have both first elements from both reports. This is making my code g
-
Web Sharing Not Starting Up After installing PHP
On Mac OS 10.4.9 on a G4 PPowerbook, using O'Reilly's "Learning PHP and MySQL," my Personal Web Sharing will not start up. I enabled Apache per their instructions and things seemed fine.. Then I i installed PHP with these commands, sudo vi/etc/httpd/
-
Basic questions, (I think)
Hi... I've had my Blackbook for about three months and I'm somewhat satisfied. This is my first mac product after my PC laptop was stolen. Anyway... question 1: my desktop is clutter with mpkg and dmg files... is it ok to just throws these in the tra
-
Hiding private contact and other private information
I have used a Palm PDA for years and depend on its ability to hide private contacts and private information while having those not marked private visible. (To view the private information one must enter a password.) I am trying to migrate from using
-
Hello, Currently I'm working with excel SAP interfacing. For this I am using VBA to call different BAPI functions. I have already some interface scripts working, however I have also one which I cannot discover what I'm missing. The VBA code is to rea