How to connect oracle 9i to microsoft visio with odbc

Hi,
Please anybody can help me that how can i configure my odbc to work with oracle 9i and to connect my database within visio.
Thanks.

Do NOT make duplicate post, please
how to connect oracle 9i to microsoft visio through "odbc"

Similar Messages

  • How to connect Oracle database  through Microsoft ODBC?

    My ODBC Configuration:
    DSN name is :db
    Username : india
    Server :db.world
    Now, i am trying to connect with oracle database through SQL*plus or TOAD.
    But, it is giving the following error.
    ORA-03121: no interface driver connected - function not performed
    Database version : 9.2.0.1.0
    Operating System : Microsoft Windows XP
    ODBC Version : 2.575.1117.00
    I am trying to connect with the database like this:
    Username : india
    Password : india
    Database : ODBC:db
    Can i connect like this otherwise whether i need install any other supporting driver?

    Now, i am trying to connect with oracle database
    through SQL*plus or TOAD.
    But, it is giving the following error.
    ORA-03121: no interface driver connected -
    function not performed
    I am trying to connect with the database like this:
    Username : india
    Password : india
    Database : ODBC:db
    As already stated, you can not use the DSN in SQL*Plus (nor TOAD, afaik)!
    I can reproduce the error message with the following:
    C:\>sqlplus a/[email protected]:c
    SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 4 21:34:58 2008
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    ERROR:
    ORA-03121: no interface driver connected - function not performedLooking up the message, it says:
    Cause: A SQL*Net version 1 prefix was erroneously used in the connect string
    Looks like this has nothing to do with your DSN - it is more a matter of not using a proper connection string.
    If 'Test Connection' works then you should probably proceed to work with Crystal Reports, using the DSN in question.
    However, you should note that the old MS ODBC driver for Oracle was designed for OCI 7 (and for databases 7.x-8.x) and is now considered obsolete by both MS and Oracle.
    Deprecated MDAC components and MS KB Article 244661.
    Use the Oracle ODBC driver included with a supported Client version instead.
    Edit:
    Clarifying and adding references.
    Message was edited by:
    orafad

  • Help how to connecting Oracle SQL Developer 3.0  with Oracle Database 11g

    Hello,
    I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
    Thanks,

    885173 wrote:
    EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
    -Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
    because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
    Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/

  • How to connect oracle database using jsf

    how to connect oracle database using javaserver faces with connection pooling

    Here is one way...
    http://jakarta.apache.org/commons/dbcp/

  • How to connect oracle form6i or 10g to mysql database

    can anyone tell me how to connect oracle forms to mysql database using ODBC connector?
    akin

    Hi
    this is step by step installation guide
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10875/toc.htm
    also below link for download
    http://www.oracle.com/technology/software/products/database/index.html
    hope this helps
    Zekeriya

  • CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

    pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
    FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
    now pls tell how to start listner and how to chage runtime preferences.
    though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
    thank you, you may be thinking such a long question.....

    sir
    By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
    all the clients are using same internet explorer as browser.
    no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
    sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
    after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
    what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
    thank you for your patience for reading the question

  • How to connect oracle application server portal to MS access DataBase

    Hello,
    I am facing one problem here.
    Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portal

    There is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
    http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
    I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
    Tak

  • How to connect Oracle 8.0.5 for Linux to Tuxedo

    How to connect Oracle 8.0.5 for Linux to Tuxedo?
    How to config Tuxedo RM file and setting.

    Thomas Drolshagen (guest) wrote:
    : Oracle 8.0.5. Installation on S.u.S.E. Linux 5.3
    : =================================================
    : After strugling for 3 weekends with the installation of Oracle
    : 8.0.5. on a
    : S.u.S.E. 5.3 distribution here are the installation steps that
    : worked for me.
    I have tried to install Oracle on SuSE 5.2. I almost complted the
    installation, but kept getting a failure on installing the
    database. The last entry in the install.log is:
    Leaving trace.ins- Entering Make Dependent section.
    - Entering do_relink==false section.
    - Leaving Make dependent section.
    - Entering database actions section.
    Deciding to start again from scratch, I tried deleting all files
    and begining again, but now I get a different error running
    orainst. The installer keeps responding that 'file x already
    exists'. The name of the file changes each time I run it, and no
    file of that name exists. I have tried deleting the temp
    directories, as well as dropping them and recreating them
    elsewhere (desperation!), but I canot stop this from happening:
    An operating system error occurred while trying to spawn
    '/orasys/app/oracle/product/8.0.5/bin/otrccref' while
    redirecting
    output to '^ @^'. (File exists.) Would you like to retry
    the
    operation, ignore the error, or allow the error to be
    processed by
    the Installer?
    Does anyone have any ideas??
    null

  • How to connect Oracle database in VC++.06

    How to connect Oracle database in VC++.06 please give me details

    on the Insert command button and add the following code to the button click event:
    try
    string results = "";
    OracleConnection con = new OracleConnection("DSN=Employee;uid=system;pwd=test");
    con.Open();
    .....................................................................

  • How to connect oracle database from tuxedo

    Hi,
    How to connect oracle database from tuxedo.
    If any one can help me.
    Regards,

    it depends on configuration your going to choose, there are two ways--
    - Using X/Open standards, for this
    you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
    Then in UBBConfig file in GROUPS section u have to set Openinfo.
    It also depend on which database you are going to use.
    In your service now you need to call tpopen() API from tpsvrinit() function.
    - Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
    EXEC SQL Connect ...

  • How to connect oracle database with JAVA

    how to connect oracle database with JAVA....
    using j2sdk and Jcreator . which connector to use .. what are the code for that ..

    PLEASE .... Ask in an Oracle Java forum.
    And read the documentaiton. There is a whole document devoted to doing that. http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/toc.htm has examples.
    PLEASE ... do not ask product questions in a forum which clearly has a title saying it is devoted to assisting with download problems.

  • How to connect oracle database into VC?GIve step by step.

    Hi Experts,
    Please help
    How to connect oracle database into VC?
    I need step by step.
    what shall i do the first to connect via jdbc or  something else.
    whether we have to create dsn name or using jdbc connections?which one to use?
    Please give the basic steps.Its very urgent.
    Thanks and Regards,
    Nutan

    Hi ,
    all information are in the following document:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424">How to Configure a Business Intelligence JDBC System for Visual Composer</a>
    Rgds,
    Karim

  • How to connect oracle data through BlazeDS in flex 4

    How to connect oracle data through BlazeDS in flex 4

    Hi
                   If u want to connect to the database oracle just paste the Ojdbc14.jar file into the lib folder of blazeds project..
                             Normally blazeds distribution version contains blazeds.war file... upload that war file to the tomcat or any other application server..
                          u will get the build path and in lib folder paste the ojdbc14.jar file to connect to the oracle and do u r stuff at server side java ....
                      if this will reslove ur problem please mark as answered..

  • How to connect oracle client (xp) to database server

    how to connect oracle client to database server
    i have following information
    --server ip
    --port no
    --database name.                                                                                                                                                                                                                                               

    In addition to these parameters you need username and password.
    Then you can connect with
    sqlplus -L [email protected]//server_ip:port_no/database_name
    Yours,
    Laurenz Albe

  • HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g

    Hi,
    My question is HOW TO CONNECT ORACLE BI DISCOVERER ADMINISTRATOR 10g. I know how to connect PLUS and VIEWER using a URL. Do i need to install Discoverer Admin. separately on my local machine.
    This is very urgent... Please reply.
    Thanks in advance for your time and answers.
    Jay

    Discoverer Administrator is a client side tool, you must install it on your machine or even you can install discoverer administrator in your server but you must connect through a connection string which you must enter in your tnsnames
    regards

Maybe you are looking for

  • RFC to WS Error

    I am doing RFC to WS  scenario i am getting following error in RFC sender adapter Error in processing caused by: com.sap.aii.af.lib.mp.module.ModuleException: call to messaging system failed: com.sap.engine.interfaces.messaging.api.exception.Messagin

  • Error notes

    Ok i have attatched note in ** AND CAPITALS for errors as i dont know how to cut and paste from DOS i will have to do this in a few goes! I do appreciate the help on this as its all new to me Paul public class week9 public static void main (String ar

  • How to compare two files?

    Folks: Is there any utility class or method that I can use to compare the contents of two files? Something like diff comamnd in UNIX. Thanks a lot!

  • BOE indexing within KM in SAP EP

    Hi, when configuring the KM integration one has to specify a user for indexing and subscription. Is it possible to generate an index of BOBJ content using TREX? Further, is it possible to leverage BOBJ folder and object security when accessing these

  • Broadcasting with precalculation workbook

    Hi BI experts, In BI 70 we have two ways how to precalculate: 1. RSPRECADMIN 2. Portal precalculation with broadcasting workbook What is the difference? Where I can find more informations about broadcasting a precalculating? Jan


HashFlare