How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noor

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

Similar Messages

Oracle Developer Suite 10g - Windows 7 - swap space problem

Hi brothers and sisters,
Hope all you are fine. I am facing swap space problem while installing Oracle Developer Suite 10g on Windows 7 . I have downloaded and installed Oracle Database 11g Express Edition successfully and it is working properly. Now, I have downloaded two files
a. ds_windows_x86_101202_disk1,
b. ds_windows_x86_101202_disk2
to install Oracle Developer Suite 10g using Windows 7 Ultimate. The Oracle Universal Installer have passed the following issues:
a. Operating system version,
b. Monitor
But while checking swap space, it gives a message, "0 MB available, 1535 MB required", Failed. I have 2 GB RAM installed and system managed paging file space which is currently allocated to 2038 MB in my system .
Please solve me the problem.
Noor

increase the system virtual memory for the OS drive.
check this link
http://hamid-oracle.blogspot.com/2011/06/how-to-install-oracle-developer-suite.html
also check this link.
Re: error installing oracle forms 11g release 2
Hope this helps
If someone response is correct or helpful, mark accordingly. and if answered mark answered.
Edited by: HamidHelal on Jun 27, 2012 2:28 PM

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

How to start Report Server automatically in developer suit 10g

Hi all
I have an application implemented using Developer Suit 10 g forms and reports builder.
For this application, the first report to be printed after booting the computer takes a long time (around 5 minutes)
when printing any more report (even if it was the one printed before ) it takes a little time, this means that the first report made the report server start.
I rebooted the computer, but this time i started the report server manually using this command :
rwserver server=report_server_name
Now, the report is printed after a little time, It's OK.
Is there any configuration to start the Report Server automatically in developer suit 10g after the computer boots ?
Please help

No answer ?

Getting Error while running Developer Suite 10g forms.

After designing the form when I'm trying to run the form I'm getting the error message The Java Runtime Environment Cannot be loaded from <\bin\client\jvm.dll>. I have installed oracle database 11g and developer suite 10g in Windows XP Prof. Pc. Please guite some one. Trying from last 2 days but nothing is happening.

You may not have admin rights to install Jinitiator on your box.
Cheers

Urgent!! Deploy reports for Developer suite 10g (Newbie)

Hi All,
I've generated few jsp report using report builder from developer suite 10g. I know in the developer suite 9i. I just copy these jsp files under \reports\j2ee\web. Then start OC4J Instance, and type in from browser as http://localhost:8888/reports/testreport.jsp?userid=username/password@dbconnection. However, it doesn't work for 10g. Is there any different in deploy report for 10g? Please help....
Thanks,
Best Regards,

Andy,
It's impossible to help us if you doesn't specify what error messages you get?
If I should take a guess, you're using the wrong port number. Did you check if it's correct before posting your message? Most Developer Suite 10g installations comes with port number 8889.
Regards,
Martin Malmstrom

Can I connect Oracle Forms Builder 10g to MS Access Database

Hi,
I have Oracle forms builder installed in my PC. I downloaded the Oracle Database Server from the oracle website and installed that as well. But due to the installation of Database server, my system has become very slow. In order to avoid this I wanted to know if I can connect the forms builder to MS Access Database.
Also, using ODBC I have created a database in my D:\ drive.
If using MS access as a database is possible, then kindly guide me how to proceed with it.
Thanks,
Shashank Senan

Hi Francois,
Thanks for your reply.
I have been working on Oracle forms from the past 1 year. I wanted to increase my expertise at the subject so thought I'll install it at my home and then try out developing and running a few small forms. So, in order to do this I downloaded and installed Developer Suite and database server. After installing the database server the system became very slow, as I mentioned earlier. Once I uninstalled the server, my system speed was back to normal. My system configuration is:
512 MB ram, Intel Pentium 4 2.66 Ghz processor, Windows XP service pack 3,1 CPU.
My requirement is very minimal. I just want a simple database where I can create tables, store data and connect form. If you have a have any other suggestion for my requirement then kindly help me in this regard.
In the meantime I'll act on your suggestion and try and install the XE server.
Thanks.
Shashank

How can I make OPAC in Oracle Forms Builder

Hello everyone,
I'm developing a Library Management System as my project in my Oracle subject.
Can anyone tell me how to make OPAC module of Library management system in Oracle forms builder.
I don't have any idea because this is my first encounter in this system.
Thanks.
I really appreciate all your help.
God bless ^^

Hi,
Simple, using current values you can create new id , 'old' and name so oracle will create record, now refresh block, next using next_record in loop you can find record,erase one and refresh block.
Adinath Kamode

Form builder make an error in windows xp sp2 when connecting oracle xe

i have installed the forms from developer 6i and tried to connect to
oracle xe using form builder , the problem was that windows show an error and
it says that an error has occur and we are sorry , do you want to send the message

Hi Samer,
sorry, but I haven't done any character set migration yet. Usually I have used exp/imp to move the data to a new database instance that was created with the new target character set. But with XE you only have the choice between WE8MSWIN1252 and AL32UTF8, you cannot easily create a new instance with a different character set.
This should suffice for most applications. But you have a special case where you run into a problem with a product where you won't get any enhancements for anymore. Forms6i entered extended support on 01/2005.
Perhaps someone else can help you out with the character set migration.
Good luck,
~Dietmar.

How to insert special character from Oracle form builder 10g

Dear all,
I need help. how to insert special character like 'Superscript or Subscript ' from oracle form builder 10g. I had try in Oracle form builder 6i with press ALT+ASCII code in the text item and it work, but in the oracle form builder 10g this method doesn't work... would you like to help me...somebody please...
Best Regard,
Dedy P.T.

What do you mean by insert ... from Forms Builder? Do you mean you want to add it as text in a string of pl/sql code or as part of boiler plate text (label) or a value on the Property Palette?
For special characters you would need set NLS_LANG to something that would support the characters you want to use. For the Builder to see the change, you would need to set NLS_LANG to something like:
NLS_LANG=AMERICAN_AMERICA.UTF8
This can be done in the Windows Registry or system. As I mentioned, this will only apply to the Builder and will have nothing to do with a running form. For running forms you would need to set this in default.env. As for things like super and sub scripts, these are font formats and not necessarily characters. For the most part, I don't believe these are supported in Forms.

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

How to create browse button in Oracle Form Builder?

Hello all
I'm learning Oracle Form Builder and i want to create browse button but i don' know how i do
I hope u will help me!
Thanks all

Configure and use the Webutil library functions. See the Webutil link from the OTN Forms home page
Francois

Is there anyone using oracle's forms builder to develop without EBS?

Is there anyone develop Information System use forms builder to develop your own product without EBS.
which version are you used ? forms 6i?or forms 10g,11g?

Hello,
(Almost) Everybody, here, uses Forms without EBS, because EBS users post in the dedicated E-Buisness Suite forum ;-)
Francois

How to configure webutil 1.06 with oracle Developer suite 10g R2

Hello everyone,
My computer configuration is
OS-> Windows 7 Ultimate (32-bit)
RAM-> 1GB
I have successfully installed oracle XE and developer suite 10g R2 in my computer. Now i want to configure webutil. Please give me the step-by-step procedure for it.
Thanks in advance.

hi
plz search this forum u will find so many answered threads anyways.
plz read the following.
Webutil Settings
Requirements
· Download Jacob 1.8 archive and webutil 1.06
(Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
 and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
webutil can be downloaded from http://otn.oracle.com )
Database Setup
 Login as SYS
 create user webutil identified by webutil
 default tablespace users
 temporary tablespace temp;
 grant connect, create session, create procedure, create public synonym to webutil;
 grant resource, connect to webutil;
 grant execute on dbms_lob to webutil;
 login as webutl user and run
 create_webutil_db.sql
 create public synonym webutil_db for webutil.webutil_db;
 grant execute on webutil_db to public;
 set serveroutput on
declare
 a boolean;
begin
 a:=webutil_db.closeblob(1);
 If a then
 dbms_output.put_line('webutil/blob setup '||'TRUE');
 else
 dbms_output.put_line(' webutil/blob setup '||'FALSE');
 end if;
end;
copy jacob.jar and copy frmwebutil.jar to ORACLE_HOME/forms/java directory.
 Make sure you can download these using the below
 http://machinename.com/forms/java/jacob.jar
 http://machinename.com/forms/java/frmwebutil.jar
Create directory webutil under [OraHome]/forms/webutil and .
 copy jacob.dll , JNIsharedstubs.dll, d2kwutil.dll
 Check the permissions. Read /Execute
Forms.conf AliasMatch ^/forms/webutil/(..*)
$ORACLE_HOME/forms/webutil/$1"
 http://machinename.com/forms/webutil/jacob.dll
 http://machinename.com/forms/webutil/JNIsharedstubs.dll
 http://machinename.com/forms/webutil/d2kwutil.dll
In the default.env update
 WEBUTIL_CONFIG=/opt/oracle/product/10gas/forms/server/webutil.cfg
 CLASSPATH=c:\temp\webutil\lib\frmwebutil.jar;c:\"Program Files"\Java\j2re1.4.2_06\lib\rt.jar (Include rt.jar)
 Also include C:\Dev10g\forms\java\ frmall.jar
Settings for webutil.cfg
 logging.file=c:\temp\webutil.log
 logging.enabled=TRUE
 logging.errorsonly=TRUE
 logging.connections=TRUE
 transfer.database.enabled=TRUE
 transfer.appsrv.enabled=TRUE
 transfer.appsrv.workAreaRoot=<Enter Directory /folder on Server>
 transfer.appsrv.accessControl=TRUE
 transfer.appsrv.read.1=<Enter Directory /folder on Server>
 transfer.appsrv.write.1=<Enter Directory /folder on Server>
Entry in the formsweb.cfg
[webutil]
 WebUtilArchive=frmwebutil.jar,jacob.jar
 WebUtilLogging=on
 WebUtilLoggingDetail=normal
 WebUtilErrorMode=Alert
 WebUtilDispatchMonitorInterval=5
 WebUtilTrustInternal=true
 WebUtilMaxTransferSize=16384
 baseHTMLjinitiator=basejpi.htm
 baseHTMLjpi=webutiljpi.htm
 #archive_jini=frmall_jinit.jar
 lookAndFeel=oracle
 form=WELCOME.fmx
 userid=webutil/Webutil$123@ORCL
 width=955
 height=545
 jpi_download_page=https://java.sun.com/products/archive/j2se/1.4.2_09/index.ht ml
 jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
 jpi_codebase=https://java.sun.com/products/plugin/autodl/jinstall-1_4-windows- i586. cab#Version=1,4,0,0
jpi_mimetype=application/x-java-applet;version=1.4
Sign jacob.jar ( Not mandatory )
 Open a DOS command prompt.
 Add [OraHome]\jdk\bin to the PATH:
 set PATH=[OraHome]\jdk\bin;%PATH%
 Sign the file, and check the output for success:
 [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
[Previously this point stated that frmwebutil.jar also needed to be signed. This is no longer necessary and should not be done.]
Start Forms Builder and connect to a schema in the RDBMS used in step (4).
 Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
 If the PLX is not generated, the Webutil.pll library would have to be attached with
 full path information to all forms wishing to use WebUtil. This is NOT recommended.
Create a new FMB.
 Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
 There is no need to Subclass the WebutilConfig object.
 Attach the Webutil.pll Library, and remove the path.
 Create a new button on a new canvas, with the code
 show_webutil_information (TRUE);
 in a WHEN-BUTTON-PRESSED trigger.
 Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
 Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
 the "Application Server URL" is empty.
 Then append "?config=webutil" at the end, so you end up with a URL of the form
 http://server:port/forms/frmservlet?config=webutil
Compile the webutil.pll and attach it to the fmb. Compile it
Debugging
Clear the browser cache and enable the jinitator / sun java plugin.
For Sun Java Plugin
Start ->Settings ->Control –Panel->Java->Advanced ->Show Java Console
Debugging ->Select All
 Clear the plugin cache and once again access the URL. Make sure all the dlls,jar files
are getting downloaded.
FRM-92050 failed to connect to server /forms90/;90serlvet -1
 oracle.forms.net,connectionexeption : form session failed during startup.
Java console shows -
When you are not able to download the webutil.jar file
java.lang.ClassNotFoundException:
java.io.IOException: open HTTP connection failed.
 at sun.applet.AppletClassLoader.getBytes(Unknown Source)
 at sun.applet.AppletClassLoader.access$100(Unknown Source)
 at sun.applet.AppletClassLoader$1.run(Unknown Source) at
java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
Cause
Ensure that the ORACLE_HOME in the .Env file points to a correct home.
Frm-40735 when-custom-item-event triger raised unhandled exception ora-06508
Cause
Ported webutil to Unix . The form appears , but when a call is made to webutil
functions, it resulted in the above error .The reason was PLL was not compiled
on unix .
Reference
Metalink Note 418970.1 ORA-06508 When Starting Webutil
Read / Write - image file
The code was not erroring out, but the image was not getting copied in the
image item .
Cause
transfer.appsrv.workAreaRoot=<name of the temp directory >
transfer.appsrv.accessControl=TRUE was not specified in the webutil.cfg file
The root of the location in which WebUtil can store temporary files
uploaded from the client.
While Writing Image file ( remember its the client to which the image
is written to ).
Example
client_image.write_image_file('d:\myimg\','GIF','CTRL.MY_IMG',
maximize_compression, original_depth);
Then ensure that on the thin client , there exist a directory called as "myimg" in the D drive .
One should watch out for the error in the console or the log depending on how
the logging has been set to .In case if the directory does not exist on the
client message appears that cannot create a file ...
These are the steps that occurs -
1) WebUtil creates a working directory that is private to the user
on the applciation server using the value of transfer.appsrv.workAreaRoot
This is that <ipaddress>\<ntuser name> directory
2) The basic forms Write Image file is used to extract a temporary copy
 of the image into that directory.
3) The image is downloaded into the client machine and saved as the name
 that you specified as the filename in the write_image_file command.
4) The temporary copy of the image held in the workAreaRoot on the Appserver
 is cleaned up.
4) Client_host - The command is supposed to run the executable on the client .
 But if you are trying to call an exe which is not in the path , you will not
 get any error.
Error Message while opening the fmb in the forms builder
Add jacob.jar and frmwebutil.jar to CLASSPATH or FORMS_BUILDER_CLASSPATH ... otherwise there is an error message when opening the canvas in the new created fmb
{code}
hope this helps u.
sarah

Oracle Forms Builder

Hi Experts,
I am learning oracle form builder version 6i where my manager wants me to develop a form with the LOV and data blocks.
I dont know the Form Builder. Where i can get the form builder document with the simple form created example.
I need it urgently.
Thanks,
Atul

Please see these doc (use TEMPLATE.fmb form to build your form).
Forms6i Documentation
http://www.oracle.com/technetwork/documentation/6i-forms-084462.html
Oracle Forms in Applications FAQ [ID 177610.1]
Error Opening TEMPLATE.fmb in Forms Builder [ID 236803.1]
Customization in Oracle Applications [ID 743490.1]
How To Customize And Compile An Application Seeded Form (FMB) Or Library (PLL)? [ID 427879.1]
How to Add a Path to Environment Variable $FORMS60_PATH [ID 168431.1]
Errors when Compiling TEMPLATE.fmb for Release 11i [ID 206458.1]
Thanks,
Hussein

How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Similar Messages

Maybe you are looking for