How to connect satellite set-top box to Qosmio G50 using RCA video-in cable

I want to connect my satellite set-top box to my Qosmio G50 laptop using the RCA video-in cable I received with the computer. (yellow, red, white RCAs and a Jack)
Could you help me where should I plug this cable as I have not found any instructions in the users manual. (The user's manual list this cable on page 21, so it can be used for something somehow for sure!)
(The set-top box does not have coaxial output, and I do not want to include another machine (eg. an old VCR) just to use coaxial connection.)
Thanks in advance for your help!
Sandor.

Hi mate
I found your other thread regarding this theme and it looks like you have answered this yourself.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=44724
Thanks for that!

Similar Messages

How do I set up HP TouchSmart 600-1215xt with TV Tuner to Digital cable set top box?

I just purchased the HP TouchSmart 600-1215xt CTO Desktop PC with TV Tuner ATSC-NTSC w PVR & remote. I want to connect it to my HDTV cable set top box (Cox Cable) so I can record TV programs from digital cable and stream NetFlix video to my 52 in Samsung 1080p HDTV. Where can I find instructions for how to configure this set up?
Thanks in advance!

skentsmi wrote:
There is HDMI input with TV tuner
To expand on my post above, the TV tuner does NOT have HDMI input. If you read the User Guide that came with the TouchSmart (p.7, 8), the TV tuner's input is actually an F-type coaxial -- you either use an antenna for an ATSC signal (over-the-air) or NTSC *analog* cable (which is become more rare all the time). You set it up using Windows Media Center, page 18 through to top half of page 22 document how to connect a set top box using various analog (composite or s-video) cables. You can not use component and you can not use HDMI.

How to connect iMAC thunderbolt port to a cable TV set top box?

I am moving to a house that will have combination TV-phone-Internet services delivered via cable (Optimum is the provider). I understand that with my new iMac which has a "thunderbolt" port that I can use the iMac as a tv monitor and DVR (recorder) and watch live TV or recorded TV. I think it is possible to record TV shows either on the iMac's hard drive or the Optimum DVR. Beyond that, I get confused because I do not understand the details of RCA cables, coaxial cables, HDMI connectors, etc. Apple does not provide support for set top boxes (I called Apple), and Optimum does not provide support for Macs (I called them too). Since Apple is the party advertising the capability of watching TV on a Mac, I would think the burden is more on them to explain how that works, and maybe they have done so on their web sites, but I cannot find it so far. I can understand that the cable company does not want to tell people how to bypass the need for their DVR equipment. Before I go out and hire a consultant for a few hundred dollars to explain it, I was hoping I might find online some tips on how to set up a system at home. No luck so far.
Am I correct in assuming that wireless connections are NOT an option because a TV signal has too much bandwidth to work wirelessly? (I do have a wireless router already.)
If so and if I am using wires to connect the iMac, am I correct to think I want to use the thunderbolt port for best results?
If so, what next? What exactly is the adapter or cable I need and how do I plug it into the set top box? There are several people in the household, and so I would want the flat screen TV monitor to work normally at times rather than only use the iMac. Does that require several set top boxes? I would think that this would be an issue for many people, and it seems to me that this forum would be an ideal place to get help. So far the people I have spoken with say "well it depends on what you want to do and what your equipment is and for that you have to go ask ___________[someone else]"

I do not understand what Apple TV is. I have TV already. When I look up "Apple TV" on the Apple website I see that is has been redesigned to be small in size but big in entertainment. Since I did not know what it was BEFORE it was redesigned, knowing that is has been redesigned does not help me understand it. Now it is smaller? So it was too big before? "Watch Netflix titles instantly." But I can do that with my mac and an internet connection now. So what is Apple TV that makes it a better or different way to watch Netflix movies? "Best of all, Apple TV is just $99" Sorry, but how is that the Best of All part? My Optimum Cable is charging me $30 a month for TV. But Apple TV's best part is it costs $99? Is that per month too? I also see that everything streams wirelessly to Apple TV, and all I need it so connect apple tv to my widescreen TV using an HDMI cable sold separately. Now I am really confused. I plug in a cable to get wireless streaming? If it is wireless, why does it need a cable? If there is a cable involved, how is it wireless? Color me clueless. I cannot find a straight forward description of what Apple TV is. And so I don't get how that is the answer to my question. Sorry for being so simple-minded. Thanks for the suggestion and I will go research further to learn what is an Apple TV.

How to exchange STD set-top for an HD Set-Top Box ?

I am currently a Verizon FIOS customer. Since there are no local offices in Southeastern, PA how do I go about both requesting a secondary HD set-top box, and also set-up a return of the one I'd like to exchange (a non-HD set-top). Will there be a pre-paid postage sticker for the one box I plan to return ? How do I go about formally cancelling the old set-top box so the charges stop appearing on my bill ?

Verizon will send you the new box with a return label for the one you no longer want. Simply place the on you're returning into the box that the new one came in, apply the label to the box, drop off at a UPS store or call for a pick-up. Once received by Verizon, billing will stop and the box will be removed from your account.

How do i know if my set top box is compatible to voice command

How do i know if my set top box is compatible for voice command and were do i find the set top box ID.

Any of the X1 DVRs( box ID is on the front) and the Xi3 ( PX0032ANI found on the bottom). RNG150's ( ID found on the front) do not have voice command remote compatibility

I have just formatted by toshiba hardrive to Mac OS extended as recommended so I could upload movies onto it from my mac however I am now unable to watch these movies through my set top box like I could previously. How can I fix this?

I have just formatted by toshiba hardrive to Mac OS extended as recommended so I could upload movies onto it from my mac however I am now unable to watch these movies through my set top box like I could previously. How can I fix this?

Check the box's documentation to find out what drive formats it's capable of reading. Very few, if any, non-Apple devices natively support drives formatted as Mac OS Extended.
(111452)

Looking for a 2-line set-top box to connect to my ...

Looking for a 2-line set-top box to connect to my router, is there one?
Caps

Hi,
I am not sure I can help on a Utility for doing this.
Again my Sagem router tells me the speed it is connecting to.
A Basic (I think what the service is supposed to be) on the front page and a Statistic item I get slightly different readings from.
The second are much closer to the Speeds I get from here
http://www.speedtest.net/
IPNetmonitor used to be a trial download as well.
It can do things like Trace Routes (you put in an IP and it will tell you the pings times to all the intervening servers).
I did use it some time ago as it then listed it did Port Scans on UDP (The Network Utility from Apple only does TCP and iChat uses UDP ports).
I have not come across anything that would tell me the Cable length to the Exchange. (So many factors that could make a measurement difficult to calibrate).
10:23 PM Wednesday; August 25, 2010

Recording a DVD with LG DVD Recorder and FIOS Standard Set Top Box

I have FIOS Standard Set Top Box, a Sony TV, and an LG DVD Recorder. I cannot figure out how to record a TV program on my LG DVD Recorder. I have 3 remotes: a FIOS Remote, an LG DVD Recorder Remote and a Sony TV Remote. What remote/s should I use, and in what order? Thanks.

1) Connect coax (cable) wire from the wall to the RF input on the back of the STB.
2) Connect coax (cable) from the cable out (might say "to TV/VCR") on the back to the STB to the cable in on the back of the TV.
3) Connect composite (red, yellow, white) wires from the back of the STB to the input of the DVD player.
4) Connect composite (red, yellow, white) wires from the back of the DVD player to the back of the TV.
Let me know if any of those aren't possible based on your equipment. The SD STB (QIP 2500) has very few outputs so there are not a lot of options for a setup like this).
In order to record a program, you will have to do the following:
-Set the STB to whatever channel you want to record and keep it on. You will not be able to change the channel, because the DVD player will be recording whatever the STB outputs (the same feed the TV gets). With FiOS, it is not possible to have a DVD do the tuning for you, because it is an all-digital signal and most DVD players can only tune to analog chs 1-99.
-Set the DVD player channel to "input" or something of the like. This will get your DVD player to show the signal from the STB.
-Set your TV channel to composite input. This will show you whatever the DVD player is getting from the STB.
-If you want to watch normal TV without the DVD player, you can turn your TV to Ch. 3 or 4 and get the feed from the STB without having to turn on your DVD player.

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

Airport Express and IPTV Set Top Box

I want to connect an IPTV Set Top Box to my wireless router but my provider's STB doesn't have Wireless networking. So I though to connect it to my wireless network with an Airport Express.
I made a scheme of how it would be connected:
Is it possible to make this?

The Ethernet port on the AirPort Express (AX) is ONLY active when the AX uses WDS to wirelessly connect to a network. Unfortunately very, very, very few non-Apple devices support Apple's WDS.
So if your wireless router is another AX or an AirPort Extreme base station (AEBS), this is possible. But otherwise it is most likely not possible.

Confused about analog tv to digital conv box to comcast digital set top box

I have an analog tv which is already connected to a governmt subsidized digital signal converter box required when all tv signals went digital. I have a digital wifi modem via xfinity, and now also have an xfinity diy digital set top box. I do not have a cable splitter/extension, so I van only hook up the tv. I unplugged the modem and commented the XF digital conv box to my analog tv. Really confused as to how to hook up wifi and tv to XF digital box, and do I need the previous free digital signal conv box. All my services are activated, but I still can't watch tv.

The Comcast box replaces the old over the air box.
If you didn't get a coax splitter, you will need one, which you can pickup for free at your local Comcast office. The coax from the TV outlet on the wall connects to the splitter's input. The outputs of the splitter, one to the cable modem, the other to the input on the cable box.
The coax output of the cable box connects to your TV like how your old box was connected.
You will find more information at this Comcast help page, look in the TV section and pick the type of box you received from Comcast.
http://customer.xfinity.com/help-and-support/phone/how-to-install-your-self-install-kit-devices/

FiOS TV cutting out to snow, resetting TV and set-top box?

Greetings all, I'm hoping someone can help here;
I have a Motorola HD DVR 72161 (Verizon supplied) connected via HDMI to my Sharp Aquos LC-46D65U. Over the last few weeks, something odd is happening: after watching TV for a while, my picture will change to snow (no video input all of the sudden). I have to turn the TV and the set-top box (STB) off. When the STB goes off, it flashed the "du1" on the display. After about 10 or 15 seconds, the (turned off) TV makes a click sound. At this point I can power everything back on and it is working fine.
There is no pattern to this, though it sometimes happens more often (every 10 or 15 minutes) when watching a recorded program. It happens both day and night.
Tech support reinitialized my STB yesterday, and it didn't seem to fix the problem. I changed the HDMI port on the TV this afternoon (moved the cable to a new port) and this didn't help either.
Any ideas or help or suggestions would be very much appreciated! Thanks.

I have the same problem and have been through the same troubleshooting with FIOS support. Unfortunately, I also have a Sharp Aquos (46D85U). I was hoping this was a FIOS issue rather than an Aquos issue, but after reading your post, I'm not sure. Perhaps it's a combination of FIOS and Aquos. I did not have this problem when I had Cox cable. It started as soon as I switched to FIOS.
Additional discoveries: You can turn off just the TV, wait a few seconds for the relay to click, then turn the TV back on and the picture comes back. Also, I just recently switched to the composite video output (Red, Blue, Green connectors) and the problem appears to have gone away. The drawback is picture quality noticeably degrades.
Sorry, I don't have an answer. Any ideas from the smart folks out there?

New to FiOS - Set Top Box isn't showing time of day

I just had FiOS installed on multiple TV's HD and non-HD. All the set-top boxes don't show a time of day except the HD DVR. Is there a way to set the others up to show the time of day? If so, how?

The new HD STB's do no have a display at all. cannot get a clock on the QIP7100-2 STB's
====================================================================================
Error exists between keyboard and chair.

Want to use FiOS TV via CableCARD - CSR insists I must lease at least one set-top box

Started looking into subscribing to Verizon using a CableCARD-based tuner, since I don't actually own a TV.
I did some research at verizon.com and ran across this page (important parts in bold):
CableCARDS
A CableCARD is a device that provides access to certain encrypted High Definition (HD) and Standard Definition (SD) digital programs without the need for a Set-Top Box.
CableCARD Features and Services
What digital programs can I watch with my CableCARD?
You can view all FiOS TV Standard Definition and High Definition digital channels to which you subscribe. You can also order certain Pay-Per-View events by calling 1-800-VERIZON (1-800-837-4966). Without a Set-Top Box, you do not have access to On Demand programming, the FiOS TV Interactive Media Guide, or other advanced features of the FiOS TV service.
So far, so good. I logged into my account, selected a package, and started the checkout process - and then encountered an odd question: "How many set-top boxes do you need?", where the options were a drop-down list starting with 1 and scaling up. There's an extra $12/month charge (plus taxes, of course) for just one box, and more for other boxes. No way to skip that step.
So apparently, according to Verizon's service rep... I need to pay $12/mo+tax for a set-top box that I don't need, and that will sit on a shelf while I watch Verizon TV through my fully-supported CableCARD adapter.

sangs wrote:
You don't need an STB or DVR, but here's the easiest thing to do - and I just did it, so I know it works.
Get the STB or DVR along with the Cable Cards. Get everything activated and working - including the cable cards - then return your STB or DVR, either to a FiOS store or via UPS. Voila, you're done and using only Cable Cards. I only have two Cable Cards on my account. Good luck.
INTERESTING.
I was considering doing this too. I originally had just a cablecard, then ordered a STB for another room. We don't use it so I wanted to return it. I can't!
Brb going to UPS store.

No variable audio output for Cisco CHS 435HDC set top box.

Background: Until the other day I had my stb connectected to a TV, using TV sound, with an HDMI cable. The P265v2 remote volume control changed the TV volume. No problems.
My new TV & home theater system was recently installed. We don't use the TV speakers. While my first preference was to program the Verizon remote to change the volume on my Onkyo receiver, this did not appear to be an option on the remote's programming instruction page on the Verizon website. Instead, I am directed to change a setting on the remote that makes the Verizon remote change the stb output volume vs the tv volume. I changed the setting on the remote and ensured the stb box was set up for "variabe" audio output.
Problem: Using the stb variable audio settings, volume settings 1 through 30 produce the same volume. (Volume setting 0 produces no volume, as one would hope.) It appears the "variable" setting isn't producing a variable output as it should be on this unit.
Thinking that maybe the receiver was complicating the sitation, I tried connecting the stb to the old TV and the new TV directly and had the same results.
Now, while I am watching TV, I need to have the receiver remote at hand in addition to the Verizon remote. It would be nice to have the volume be adjustable as it should be while using the Verizon remote. I don't like the idea of using a seperate universal remote because then I would lose some of the functionality that the Verizon remote provides when watching TV, using the DVR, watching on demand, etc.
I would like to know if this is a problem just with my unit, or if it exists with all of these units, which would hopefully be fixed with a Cisco/Verizon firmware update soon, hopefully.
Thank you.

soups230 wrote:
Having same issues with hdmi and optical. Any fix to this.
Hello,
In order to control the volume on your home theater system, you'll need a FiOS TV Universal Remote that has the 4-buttons on the top for 'DVD', 'Aux'iliary, 'TV' and 'STB'. The audio receiver would have to be programmed into the FIOS TV Remote, and controlled using the 'Aux'iliary button.
Verizon's 4-Button Universal Remote Controls are available for purchase:
a) online via www.verizon.com/fiosaccessories
OR
b) at a local FiOS TV store (call first to check if they have them in stock). For a list of stores: http://www22.verizon.com/support/residential/tv/fiostv/general+support/account+issues/questionsone/8...
Presently, the default remotes for new set top boxes are the 2-button P-265 (newer version) remotes.
Regarding a problem with HDMI/optical on Cisco 435 STBs, check out the following:
Go to this webpage: http://www22.verizon.com/Support/Residential/TV/FiOSTV/Receivers/Equipment+Issues/QuestionsOne/12839...
Click on the link for 'Cisco CHS 435 HD DVR User Guide'.
Open the PDF and go to page 22 for 'Connecting to a Home Theater System...'.
Hope this helps!

How to connect satellite set-top box to Qosmio G50 using RCA video-in cable

Similar Messages

Maybe you are looking for