How to connect SB X-FI XTREME MUSIC with Creative Inspire 5.1 Digital 5

Hi,
I want to know what I have to do to connect my x-fi xtreme music with my creative inspire 5. digital 5700 due to listen music with all? 5 twiters. I have windows vista ultimate 32bits. Thanks!?JoanMessage Edited by joanantoni on 07-9-200703:54 AM

With your Inspire 5. Digital 5700, your best bet is?using the analog Front and Rear input connections on the decoder and connect them to the X-Fi Xtreme Music front (Line Out )?and rear (Line?Out 2)?output connections and then enable CMSS Music or CMSS Movie Mode on your Digital 5700 decoder which will then give you a 4./5. Upmix. Gi'ven that you don't have a Center connection on the the Inspire 5. Digital 5700, no connection can made to the your Front Center satelite speaker/Subwoofer (Line Out 3) on your X-Fi Xtreme Music card. I'm led to understand that Creative speaker systems do not need Bass Redirection to reproduce proper Bass frequencies on your Subwoofer and not on your satelite speakers but you may want to test this simply enabling and disabling Bass Redirection, on your X-Fi Xtreme Music sound card, to your own personal taste. Alternately, you can concurrently connect your Inspire 5. Digital 5700 via the Coxial Digital/PCM Input to the FlexiJack input/output jack on the X-Fi Xtreme Music and then enable Digital I/O mode for the FlexiJack in the Audio Console found in the Windows Control Panel or?in the Entertainment Mode or Game Mode Consoles. Unfortunately the FlexiJack only provides a 2 conductor connection therefore it only supports 2. Speaker system connections?therefore you will still have to enable the CMSS Music or CMSS Movie Modes on your Inspire 5. Digital 5700 decoder to produce a 4./5. sound upmix. Sadly, no optical connection can be made between your Inspire 5. Digital 5700 and your X-Fi Xtreme Music sound card without the installation of the X-Fi I/O Dri've or X-Fi I/O Console at, of course, additional expense. From my standpoint, the X-Fi I/O Dri've is a good value given the number of external inputs and outputs in offers. Again, it's a matter of what your personal connection requirements are and budget. Hope this hel
ps.

Similar Messages

  • How to get Realtek HD Audio to work with Creative Inspire 5.1 5200?

    Hi,
    I have a problem with correctly setting the Realtek HD Audio with my Creative Inspire 5200 5.1 speaker set. I don't get any sound on all of them when test button is clicked, only surround speakers work. They were working on my old PC. I did a search on this forum and Internet, but could not find any solution to this specific problem.
    Setting:
    * MSI drivers: 6.0.1.6267, directx 11, ALC 892
    * Speakers set to default audio device
    * Plugged in 3 jacks, colors matching (3 in a row - black:rear, orange: center/subwoofer, green:side speakers)
    * On Realtek HD Audio Manager: Speaker configuration: 5.1 Speaker; Optional spakers: center, subwoofer, rear pair checked; full range speakers: front left and right and surround speakers checked; speaker fill/swap/bass management disabled.
    What I get:
    * left surround clicked: OK
    * right surround clicked: OK
    * No sound from others
    Tests:
    * Checked not muted
    * Checked volume control, not set to zero
    * Rechecked cables from MB to Creative Subwoofer
    * Rechecked cables from Creative Subwoofer to speakers
    * Checked other spaker configuration settings:
    - Stereo : no sound
    - Quadro: only surround spakers OK
    - 7.1: surround spakers OK + left 2nd surround sound comes from right front speaker
    Any directions are very much appreciated
    Cheers
    Bülent
    PS: See signature for my setup

    Quote from: syncman on 30-October-10, 03:10:54
    I get something very similar with my Logitech 5.1 setup. However, I'm using a Creative Pro sound card. Some reminders for you. Remember that everyday normal sound is not encoded DD 5.1, i.e. Windows prompts, MP3, etc. 2 channel left and right stereo sound only nets 2 speakers even though you have 5.1. Unless you've set the sound card, or speaker controler to convert normal 2 channel left and right stereo to DD 5.1 you will only hear 2 speakers. It takes software that's dolby digital encoded to bring all 5.1 speakers to life. For example for every day computer sound my logitch speaker controller is set to "stereo x 2.1". With this setting the contoller sends 2 channel stereo to the front 2 speakers as well as rear 2 speakers plus the sub woofer. My center channel stays quiet until I change the controller effect to DD 5.1. I would change the speaker controller to DD 5.1 if I were to watch a DD 5.1 encoded DVD movie, or play a DD 5.1 encoded game. Keep in mind unless the software is encoded DD 5.1 anything you hear through all 5.1 speakers is SIMULATED! IMO the stereo x 2.1 sounds MUCH better than simulated DD 5.1. 
    Thank you for your answer, but I couldn't go so far yet I know some about sound and sound setups as I'm working in this area, namely video editing, sound processing, montage etc.
    The problem is at "test button" level, somehow the mobo cannot drive the correct lines :(

  • How to connect ipod in the JVC music apparatus?

    I wanna know how to connect ipod touch on some music apparatus? I ve got JVC player and i put my ipod there but it doesent work. Pls help!

    Does JVC say it will work with your mode iPod and its iOS?  There can be two reasson for problems. 
    - One is the the dock is not compatible with the iOS on the iPod.
    - The other is the configurate of the connector on the dack prevents agoo connection with the iPOd.  This is particularly true for the 4G IPod since the dock conection are is slanted.

  • How to connect my cannon mx470 series printer with bluetooth to my mini mac?

    how to connect my cannon mx470 series printer with Bluetooth to my mini mac

    Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

  • How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

    Hi there
    I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD tv it did not connect.
    Has anyone got a solution how to connect my laptop to my tv with "HDMI to 3RCA" cable.
    Please reply asap.
    Thanks

    you said it did not connect. what do you mean. what was displayed? what input did you have the tv on? need more info than "did not connect"
    click Kudos to say thanks if I helped

  • Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    I believe you naeed the Apple ADC to DVI adapter.

  • How to connect sql server 2008 r2 sp2 with vs2013 ultimate?

    how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?

    Hi Shahzad,
    >>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
    Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
    In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
    Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
    Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
    And then you can create the connect string in the Add Connection dialog box.
    Hope it help you!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Just bought new iphone4. How do I sync my apps/books/music with my ipad2??

    Just bought new iphone4. How do I sync my apps/books/music with my ipad2??

    Sounds like you don't meet the system requirement for either the iPhone or iPad and/or have not updated your iTunes.

  • How come I can't download (buy) music with my account? What is wrong with it?

    How come I can't download (buy) music with my account? What is wrong with it?

    They could barely be more vague.
    How could anyone possibly help with no information at all about your issue?

  • X-FI Xtreme Music with I/O Drive Upgrade Driv

    Hello,
    I just installed the I/O Dri've Upgrade and so far everything works after I installed the cd that came with the kit.
    When I went to Creative Labs webpage and did an autoupdate to check the drivers, it told me that I have a X-FI Platinum instead of a X-FI Xtreme Music.
    I just wanted to check with you as I know the X-FI Xtreme Music with the upgrade kit is basically a X-FI Platinum, however should I install drivers for the X-FI Platinum in the future?

    Yeah that's what I did - they're basically exactly the same card, but one comes with the I/O dri've and the other doesn't.

  • How to connect to Windows 2008 VPN server with certificate support

    Unfortunatelly if I select any Windows 2008 server compatible protocol (PPTP, L2TP) I cannot select PKI certificate, its only available for Cisco VPN. Yet my company has 1000 laptops and utilizing Windows 2008 Server for VPN (Cisco is too expensive and unnecessary because VPN is part of Windows Server). PKI certificate is required for connection security.
    Any plans to enable certificates for PPTP or L2TP in 2.1 firmware? Even better would be to add SSTP protocol with certificate support, because it takes only one standard TCP connection (https) per user (uses least possible NAT resources for heavy loaded NATed WiFi spots). Also in some public places https is the only option to connect as PPTP and L2TP are filtered.

    Hi Shahzad,
    >>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
    Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
    In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
    Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
    Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
    And then you can create the connect string in the Add Connection dialog box.
    Hope it help you!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do i use my own domain name with creative cloud?

    how do i use my own domain name with creative cloud?
    i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
    thanks!!
    Lori

    http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
    I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

  • Question about connect X-Fi Xtreme Music with 5.1 Home Theater (analog inp

    I want to connect my X-Fi to new speaker. (exact model : EACAN A200 5.)
    but it has only 6 analog input ( center,sub,front l/r,rear l/r )
    if i connect it with Creative Home Theater Cable
    ( http://asia.creative.com/products/product.asp?category=3&subcategory=55&product=4309 &nav=0 )
    will it work perfectly? because i think this cable made for 7. speaker, will i miss sound that came from side l/r channels ?
    If i can't use this cable, How can i connect X-fi to a new speaker?
    Message Edited by chunbogbog on 04-09-2008 06:0 AM

    since u are using 5. speaker, you only need to directly connect the cable from ur speaker to the sound card output, no need to use Creative Home Theater Cable.
    and remember to set your sound card to 5. no matter u use what cable, since ur speaker is 5. only...if u play 7. content movie, the side L/R will directly map to the rear speaker, so no "miss sound" issue...understand?

  • How to connect my iphone4s to the computer with broadband so i can use my apps and can download anytym...

    hi...how would i connect my iphone4s to my laptop with broadband so i can download itunes...and some apps...

    itunes support http://www.apple.com/support/itunes/

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

Maybe you are looking for

  • Using SAP PI instead of CRM Middleware

    Hi experts, Is it recommend to use SAP PI instead of SAP CRM Middleware. If yes how can I do that. I have read in forum requests that it can be implemented by using iDOC instead of BDocs. I need a technical guideline how data (eg. Business Partner Da

  • Crash on application startup

    Is there any way to symbolicate Adobe AIR crash reports. I'm getting the following from a user of an Adobe AIR application and I've no way of figuring out what particular API is causing the bad access: Process: Eye-Fi Center [5031] Path: /Application

  • How can i use the Ratio_to_report function in obiee

    Hi, I have to use ratio_to_report function to create the report. http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions124.htm. this is the link which explains the usage of this function.This function computes the ratio of a value t

  • F4 help for fields in maintenance view resp. generated maintenance screen

    Hello, I’m new to ABAP and I have to deal with the following requirement: I have a maintenance view V1 what from a maintenance screen was generated automatically by the maintenance screen generator. Now I have to add a search help for one field F1 of

  • PowerPivot 2013 | Drill to Details returns all rows

    When double-clicking on a measure, or a value within a powerpivot pivot table, the drill to details sheet returns all the rows in the dataset.  Is this normal behavior? Is there a workaround for this? Thank you!