How to connect servlet to mysql database

Hi all,
I am new to mysql. After many difficulty I have created a database with table in MySql. Now I want to connct it to a servlet. How do I do it?
Can anyone tell me the steps, including the step to create MySql datasource
thanks

thanks for the reply. I know the basics of jdbc and can connect with sqlserver. Bt how to connect with Mysql? I mean what do I provide in dsn unless I create a MySql datasource. I cant find any tutorial which teaches how to create MySql datasource. Can you give me any link???
thanks

Similar Messages

How to connect to a MySQL database in another server

Dear friends,
I am using Oracle SQL Developer 1.5.3 and I need to connect to a MySQL database located in another server.
I am trying to create a new connection, informing connection name, username and password. Supposing that "Hostname" is the IP server address, I click on "Choose database", but I always receive the following error message: "Status : Failure - Cannot connect to MySQL server".
Please tell me what I should do to solve this situation. Thanks in advance.
Best regards,
Franklin

You need to configure your mysql database to accept connection from your PC for the user you used.
For example,
GRANT ALL ON *.* TO 'someuser'@'somehost';
FLUSH PRIVILEGES;

How to connect JSP with MySql Database?

HI All...
I want to know or How to connect Mysql with JSP or JSF any other software is available? please help me.....

I want to know or How to connect Mysql
with JSP or JSF any other software isavailable?
please help me.....First you need to find 25 m of a CatV cable and...The DB files need to be located on the ninth device of a SCSI Daisy Chain with the total SCSI cable length being over 150 m (and the devices (and cables) need to be mix of Differential and Non-Differential).
Edit: And forget the terminator, who needs it?

How to connect to the mysql database using applet from remote PC

Hii All..
I am also facing a problem.
My web server and mysql server are running on the same PC.
when i connect to the database from the same PC.
Its connection but when i am trying to connect to the database from the different PC its giving error and not finding the driver "com.mysql.jdbc.Driver" because this is there on the server PC and applet runs on the client side..
So to load the deriver on the client side so that it can run the applet to make the database connection on the remote PC.
Thanks
Uttam

You are missing the library on the client.
It must be moved to the client.
Just like any other library that an applet requires.
And that has nothing to do with JDBC.
There are certainly way(s) to do it. Perhaps a forum that addresses applets, web usage or guis would provide an answer.

How to connect to a remote database in a lan??

Hey guys......! I need to connect to a remote msaccess database in a lan and import its data into my mysql database.I know how to connect to a msaccess database using ODBC.But I don't know how to connect to a remote database without creating dsn in the machine where database is.One thing more...I want to know, how can I import data into my mysql database?? Is there any query for that or simply I have to select data from msaccess database and insert into tables of my database??Please, send me the source code in the forum itself and explain also.This is the last feature of my project.So I need to do it as soon as possible.

If the mdb file in LAN, Just map the network drive.[Windows Explorer/Tools/Map Network Drive] in your system from which we need to access the remote mdb. Then go to ODBC Data Source Admin.. and create a new data source[Microsoft Access Driver] . After clicking the Select button, you will find a Network Drive will be visible on your Drives drop down. Select the map Drive, If not visible then just click the Network button there and map the network path where the mdb files reside. And use the JdbdOdbcDriver class to connect from java.

Connect to a mysql database with Oracle 9i

Hello,
how can I connect to a non_oracle-database in "Oracle 9i".
I created a ODBC data source. In Oracle8 I needed OCA. But in 9i I believe the OCA is replaced by another thing.
I wanted to connect in SQL*PLUS with:
username/password@odbc:mysql
But I get the error: ora-03121 "no interface driver connected - function not performed".
How can I connect to another database?

I've solved the DW problem by changing the site folders from
'db' to 'wwwroot' e.g. 'C:\CFusionMX\db\' is now
'C:\CFusionMX\wwwroot\
However I'm now back to my original problem. I've lost my
mqysql connection in CF Adminstrator. Before I made these changes I
could connect to my mysql databases using the following settings:
JDBC URL: jdbc:mysql://localhost:3306/test
Driver Name: MySQL Connector J
using the following Java path and file:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar
Now these settings give me the following error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
Any suggestions on this would also be welcome.
Thanks again to everyone for their help.
Sincerely,
Graham A. Kerby

How to connect Servlet to Oracle

so far i have see some example from internet on how to connect servlet with Oracle.. but i don't undertand the statement below
"jdbc:oracle:thin:@elab-unix4.bus.umich.edu:1521:elab"
can any expert please explain to me??
what is @elab-unix4.bus.umich.edu ?? elab is database's name?

so far i have see some example from internet on how to
connect servlet with Oracle.. but i don't undertand
the statement below
"jdbc:oracle:thin:@elab-unix4.bus.umich.edu:1521:elab"
can any expert please explain to me??
what is @elab-unix4.bus.umich.edu ?? elab is
database's name?jdbc:oracle: type driver
thin: Type of driver again. Oracle distinguishes between thin/thick, but I'm not sure of the features. We use thin.
:@elab-unix4.bus.umich.edu:1521:elab
IP Address of box where db resides:@elab-unix4.bus.umich.edu, port:1521, db instance: elab.

Connecting to a Mysql database using CF Administrator and DW

I can't create a mysql datasource in CF Administrator.
If I use the following datasource settings in CF
Administrator:
JDBC URL: jdbc:mysql://localhost:3306/test
Drive Class: MySQL Connector J
AND (note the emphasis) I set my local and remote folders in
my DW site local folder, remote folder and testing server folders
all to C:\CFusionMX\db\, I can connect to my mysql database in CF
Administrator.
However, with these DW site folder settings, DW doesn't
recognize any databases (Access or Mysql) at all.
When I change my DW site folder settings to 'wwwroot'
(e.g.local folder C:\CFusionMX\db\' is changed to
'C:\CFusionMX\wwwroot') DW now lists all my CF Administrator
databases.
The problem is CF Administrator can't connect to my Mysql
data sources. It gives me the error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
I've tried changing the 3306 port to 8500, but this doesn't
help.
My java path and connector file is:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar,
Is this a ID/password problem? I've tried both 'root' and
leaving the ID field in the CF Administrator add data source block,
both to no avail. I don't have a password set in Mysql for 'root'
either.
Any help would be gratefully appreciated. I've been working
on this for weeks and keep running into one problem after another.
Thanks a million in advance.
Sincerely,
Graham A. Kerby

1) ensure mysql server is running
2) there are numerous tutorials for mysql installation out
there
3) there are good free mysql admin tools out there
4) use both the above to verify your mysql installation is
correct
5) please tell me you do have your zonealarm DISABLED
hth
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Connecting to a Mysql database using a ColdFusion server

can't create a mysql datasource in CF Administrator.
If I use the following datasource settings in CF
Administrator:
JDBC URL: jdbc:mysql://localhost:3306/test
Drive Class: MySQL Connector J
AND (note the emphasis) I set my local and remote folders in
my DW site local folder, remote folder and testing server folders
all to C:\CFusionMX\db\, I can connect to my mysql database in CF
Administrator.
However, with these DW site folder settings, DW doesn't
recognize any databases (Access or Mysql) at all.
When I change my DW site folder settings to 'wwwroot'
(e.g.local folder C:\CFusionMX\db\' is changed to
'C:\CFusionMX\wwwroot') DW now lists all my CF Administrator
databases.
The problem is CF Administrator can't connect to my Mysql
data sources. It gives me the error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
I've tried changing the 3306 port to 8500, but this doesn't
help.
My java path and connector file is:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar,
Is this a ID/password problem? I've tried both 'root' and
leaving the ID field in the CF Administrator add data source block,
both to no avail. I don't have a password set in Mysql for 'root'
either.
Any help would be gratefully appreciated. I've been working
on this for weeks and keep running into one problem after another.
Thanks a million in advance.
Sincerely,
Graham A. Kerby

If it were me I would use the MySQL JDBC driver and not ODBC. Then DSN versus not-DSN wouldn't be an issue.

Can't Connect to the Mysql Database using J2SE jdk1.5

Can anyone tell me why this error occurs ????????????????????
Following are the codes ;
package dbconnect2;
import java.sql.*;
public class dbconn2 {
public static final String URL =
"jdbc:mysql://localhost:3306/test";
public static final String USERNAME = "test";
public static final String PASSWORD = "password";
* @param args the command line arguments
public static void main(String[] args) throws Exception {
// TODO code application logic here
Connection connection = null;
try {
Class.forName("com.mysql.jdbc.Driver");
connection = DriverManager.getConnection(URL,
USERNAME, PASSWORD);
Statement stm = connection.createStatement();
ResultSet rs = stm.executeQuery("select * from emp");
while (rs.next())
String strnaam = rs.getString("emp_name");
System.out.println(strnaam);
finally {
if (connection != null)
connection.close();
================================================================================
This is the run time error ;
init:
deps-jar:
compile:
run:
Exception in thread "main" java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at dbconnect2.dbconn2.main(dbconn2.java:39)
Java Result: 1
BUILD SUCCESSFUL (total time: 2 seconds)
please help me to sort this out
Thanks
Sishani

I've solved the DW problem by changing the site folders from
'db' to 'wwwroot' e.g. 'C:\CFusionMX\db\' is now
'C:\CFusionMX\wwwroot\
However I'm now back to my original problem. I've lost my
mqysql connection in CF Adminstrator. Before I made these changes I
could connect to my mysql databases using the following settings:
JDBC URL: jdbc:mysql://localhost:3306/test
Driver Name: MySQL Connector J
using the following Java path and file:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar
Now these settings give me the following error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
Any suggestions on this would also be welcome.
Thanks again to everyone for their help.
Sincerely,
Graham A. Kerby

PHP Connection to a MySQL database "An unidentified err has occurred"

This is driving me up the wall.... With my hosting provider
at work I cannot make a connection to a MySQL database with
dreamweaver using the new connection in the databases tab. "an
unidentified error has occurred"
I am certain that I am entering the info correctly and have
the correct permissions to access the database, I think it has to
do with the _mmServerScripts folder and the testing server.
With the hosting provider that I use for personal websites I
make connections all day long doing the exact same thing that I am
doing here at work and I'm stumped. I even read a lenghty article
on this forum with possible solutions... none of them worked.
Is there any way around the _mmServerScripts directory and
testing server to make a connection and then use the bindings and
server behaviors tabs to creat recordsets, etc??
Thanks in advance for any help!
George

o0knightro wrote:
> Is there any way around the _mmServerScripts directory
and testing server to
> make a connection and then use the bindings and server
behaviors tabs to creat
> recordsets, etc??
Not if you want to use Dreamweaver server behaviors, no. The
usual
meaning of "an unidentified error has occurred" is failure to
connect
because communication is blocked by a firewall.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Can APEX/ORACLE connect to a mysql database?

Hi
Just wondered whether APEX and ORACLE could connect to mysql database. I may have a requirement to link to a mysql database and retrieve the data and wondered if APEX could do this.
Thanks

Hi
Apex sits within the Oracle database. Oracle can connect to a mysql database via a database link so yes this is certainly possible. We connect extensively to an Informix database here actually. This is really an oracle question though so you just need to look in the documentation for the CREATE DATABASE LINK command and for setting up the actual connection.
If you need more help let me know.
Cheers
Ben

How to connect Java to oracle Database Express Edition?

Anyone can help me?
How to connect JAVA TO ORACLE DATABASE EXPRESS EDITION?

I suggest you to read this article:
http://wiki.oracle.com/page/JDBC
Regards,
Ricky

How to connect java in mysql....

how to connect java in mysql.... help me guys
am newbie...

http://www.mysql.com/products/connector/j/
download the JDBC driver and read the docs.
if you don't know JDBC, Google for "Sun JDBC tutorial" and study it.
don't ask for sample code. there's plenty out there.
%

How To connect More Then One database

How To Connect More the One Database In Single form.
I want to use Access And Oracle In the Same Form.
I want to Transfer data from Access file To oracle database.
Chirag

Hi,
You can do this using EXEC_SQL package. Please see Note 115540.1 on metalink which describes how you can connect to Ms Access and Oracle using EXEC_SQL.
Regards
Kavitha Prakash
Oracle Support

How to connect servlet to mysql database

Similar Messages

Maybe you are looking for