How to control and use the search criteria values "%" ?

Hi,
When I searched some information in my employee name. I filled in search criteria values "%" and selected the "Go" button to see the result. But I got errors that the search criteria values should not begin with a "%" or "_" for at least one if the listed fields.
How to control and use the search criteria values "%" ?
Thanks,
sinolee

sinolee,
These kinds of details are mentioned in Dev guide. Always have a look into dev guide before posting.
--Shiv

Similar Messages

How to Define and Use Formatted Search in Sap Business One 2007

Hi
Any Document on How to Define and Use
Formatted Search in Sap Business One 2007.
Thanks

Hi Manish,
It is Very simple Procedure of defining FMS(Formatted Search)
in SAP 2007B Same as SAP 2005B & SAP8.8 Version
Do this,
->> Open the require Document.
for ex. IF you add the UDF in Marketing Document(Sales/Purchase)
1. Goto the UDF (or) any Default(Original) Field and Click ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the require Auto refresh field
6. Check the Refresh Regularly (or) Display Saved Values.
Regards,
Madhan.

Where can I learn how to setup and use the new features in Mountain Lion?

Where can I learn how to setup and use the new features in Mountain Lion?

MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to uncover and use the hidden Service menu on the Galaxy S3

I ran across this article over at Android Central that appeared interesting, there appears to be a diagnostic menu built into the S3 software to test the hardware for defects, this may be a useful item for any users that feel that they have a defective device... Check out the article at How to uncover and use the hidden Service menu on the Galaxy S3

That's good to know that such options exist in phones.

How to select and store the dynamically clicked values in the checkboxes?

Hi Gurus
How to select and store the dynamically clicked values in the checkboxes?
Scenario:-
I am having a tree structure but I am not getting that user has clicked the which nodes.
So how to do it.
Pls.

Hi,
Once again, this is dependent on what your implementation expects. It would seem that your implementation is expecting all of the API to be coded in Java Card so it would make sense that you would load these packages like any other package. Loading an applet is not a special case, it just has an extra step of installing instances of it (and can actually be installed). Any other Java package just needs to be loaded. As such, just load your CAP files for each package of the API before loading any code that depends on it.
Cheers,
Shane

How to select songs using the search bar in iTunes for Windows 8.1

Just today (8th May, 14) I couldn't select songs when using the search bar in the top right hand side of iTunes. I patched it but it didn't solve the problem, however once I ran as administrator it did fix the problem. Is there a way to not have to run as administrator every time I want to open iTunes and/or is there a way to fix this problem? I have iTunes pinned on my taskbar so by default it does not open iTues as administrator. Thanks

Hi,
This should be compatible issue.
Please try to install the driver in Windows 8.1 compatible mode:
Make older programs compatible with this version of Windows
http://windows.microsoft.com/en-in/windows-8/older-programs-compatible-version-windows
If you still find unknown device in your Device manager, right click to update the driver to see what's going on.
For further troubleshooting, please post back the C:\WINDOWS\INF\setupapi.dev.log
here for our research.
You can update it onto OneDrive or the similar network device and share the link here.
Kate Li
TechNet Community Support

How to install and use the Gnome-DO application in oracle enterprise Linux

My Oracle Enterprise linux is 5.3,
I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
Please help me regarding this.
With Regards
DSK

According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

How to get the search criteria value in model

Hi,
I've a search page and one of the search item has BETWEEN operator. How can I get the values for this search criteria item in model project ie., inside the VOImpl.java?
Thanks

As you gave no jdev version and no use case all I can tell is to look at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/59-table-filter-by-data-range-176653.pdf which might help.
What do you want to do with the parameter inside the VO?
Depending on the use case and jdev version there are other possible solutions.
Timo

How to install and use the CP2102 USART to USB Converter?

First off, I did a quick search and found that some people had had success in that the cp210x driver was already installed on their machines. I did a modprobe and it returned nothing (not an error).
I searched around on the net a bit and found a very useful USART to USB converter bridge (http://www.nexuscyber.com/cp2102-usb-to … Mgod5UQAdQ). The CP2102 is a programmable device with many settings insofar as the data framing is concerned. As such, a driver for the device must be used to interface and modify these parameters.
On the Silabs website I found this driver (http://www.silabs.com/products/mcu/page … ivers.aspx) for linux (kernel > 3.x.x). The problem is that this driver is just a single C program with zero documentation. An include make file is about as useful considering it has a single line in it that fails (for me) at run-time.
obj-m = cp210x.o
KVERSION = $(shell uname -r)
all:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean
The driver source can be found here (http://pastie.org/private/kulx2zqdyvkafoxekwjq)
Where my make error is
make -C /lib/modules/3.14.4-1-ARCH/build M= modules
make[1]: Entering directory '/usr/lib/modules/3.14.4-1-ARCH/build'
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function 'get_symbol_str':
scripts/kconfig/menu.c:587:18: warning: 'jump' may be used uninitialized in this function [-Wmaybe-uninitialized]
jump->offset = strlen(r->s);
^
scripts/kconfig/menu.c:548:19: note: 'jump' was declared here
struct jump_key *jump;
^
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
scripts/Makefile.build:44: /usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile: No such file or directory
make[2]: *** No rule to make target '/usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile'. Stop.
/usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/Makefile:185: recipe for target 'archheaders' failed
make[1]: *** [archheaders] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
Makefile:4: recipe for target 'all' failed
make: *** [all] Error 2
If I do not sudo make I just get this:
.probe = usb_serial_probe,
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:165:16: error: 'usb_serial_disconnect' undeclared here (not in a function)
.disconnect = usb_serial_disconnect,
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_config':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:321:3: error: implicit declaration of function 'dbg' [-Werror=implicit-function-declaration]
dbg("%s - Unable to send config request, "
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_open':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:430:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_close':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:451:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:534:17: error: invalid type argument of '->' (have 'struct ktermios')
&tty->termios->c_cflag, &baud);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios_port':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:556:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_change_speed':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:706:21: error: invalid type argument of '->' (have 'struct ktermios')
baud = tty->termios->c_ospeed;
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_set_termios':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:735:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:740:22: error: invalid type argument of '->' (have 'struct ktermios')
cflag = tty->termios->c_cflag;
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmset_port':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:871:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmget':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:910:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_break_ctl':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:932:36: error: 'struct usb_serial_port' has no member named 'number'
dbg("%s - port %d", __func__, port->number);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_init':
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:989:2: error: implicit declaration of function 'usb_serial_register' [-Werror=implicit-function-declaration]
retval = usb_serial_register(&cp210x_device);
^
/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:996:3: error: implicit declaration of function 'usb_serial_deregister' [-Werror=implicit-function-declaration]
usb_serial_deregister(&cp210x_device);
^
cc1: some warnings being treated as errors
scripts/Makefile.build:314: recipe for target '/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o' failed
make[2]: *** [/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o] Error 1
Makefile:1274: recipe for target '_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source' failed
make[1]: *** [_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
Makefile:4: recipe for target 'all' failed
make: *** [all] Error 2
There is no documentation aside from:
make ( your cp210x driver )
cp cp210x.ko to /lib/modules/<kernel-version>/kernel/drivers/usb/serial
insmod /lib/modules/<kernel-version/kernel/drivers/usb/serial/usbserial.ko
insmod cp210x.ko
Can anyone provide some guidance on the steps to install this driver (or at least where to look) and why there is such a lack of documentation? Are there assumptions here that I am not aware of? How is anyone suppose to use this? If you look in the source there are structures being used as arguments to functions that are never defined as far as I can tell. Perhaps they are part of the header files included at the top, but I could not find some of those on my machine either.
Has anyone had success using this device?

ewaller wrote:<hopeful>Do you have an oscilloscope? </hopeful>
First, I think you have a mismatched Baud. Check your settings in GtkTerm. It could also be the uController. I know you said you have it set for 9600 Baud, but are you sure? The divisor settings are dependent on your clock frequency. Are you sure you are using the correct divisors for the frequency of your crystal? And are you using a crystal, ceramic oscillator, or external oscillator for your time base?
I did not think the internal RC oscillators were that bad off, so I was using the internal 8MHz (DIV8 = 0 fuse bit). Taking your advice I just refused the AVR and set it to use a 20MHz clock (external crystal oscillator) to no avail. The setting in GTKterm is certainly 9600 baud.Referencing the datasheet for the Atmega328P we have:
Which gives a a UBRR register value of 129 corresponding to normal speed (U2Xn = 0). This is all computed for me at compile-time via this formula:
20,000,000/(16*9600) - 1 = 129.2 ~ 129 truncated.
That the two devices can communicate tells me they both might be using the same wrong Baud.
I was also suspicious of this .. I do not have a trivial way to test this though. Perhaps some workaround using timers is about the best I can do; no oscilloscope here. Doing a quick high-level test I did find something rather interesting though. Both devices are set to run at 9600 baud. One device is operating at 8MHz (internal oscillator) and the other is using an external 20MHz crystal. I am getting UART communication between the devices, but certainly not the characters I'm sending..
The other problem is that I think you have "Local Echo" turned on in GtkTerm. This places the system in "Half Duplex" mode in which data are not expected to be echoed from the Atmel. That you are getting two characters when the pins are shorted tells me you get the local echo and the loopback. Then the loopback is missing, you still get the local echo. Also, make sure you have parity turned off.
GTKterm does not actually show you what you are typing into the terminal. That is, when you type a character then nothing is displayed to the screen. Presumably this character is sent out as you type it. I was under the impression that local echo would just echo what I type to the screen as well as send it out. Thank you for the clarification.
Last edited by sherrellbc (2014-05-28 03:16:48)

How to configure and use verity search peoplesoft?

Hi All,
I have installed Veirty on pshome..Now how to configure it to use for searching in peoplesoft environment.
Our environment is,
Peopletools 852(app server) and Oracle 10g on Solaris Sparc10
HCM 9.1FP2 application
Thanks in advance.

There is an entire chapter in PeopleBooks devoted to Verity Search
PeopleBooks > PeopleTools 8.52: System and Server Administration > Configuring Verity Search and Building Verity Search Indexes
PeopleBooks > PeopleTools 8.52: PeopleCode API Reference > Verity Search Classes
I would strongly advise you to have a look at Secure Enterprise Search that was introduced in PeopleTools 8.52. More powerful, out of the box integration with PeopleSoft for global search and search pages and full declaratie from PeopleSoft pages.
PeopleBooks > PeopleTools 8.52: PeopleSoft Search Technology > Understanding PeopleSoft Search Framework

How to instanciate and use the instance of a symbol with JSFL

Hi,
I'm a noobie with Flash Pro / JSFL.
I'm looking for a way to instanciate UILoader and use them with JSFL.
I tried to create an empty FLA that contain a UILoader symbol in its library.
With JSFL I open it and add it to the stage.
It works, I have a UILoader instance at 200;200 but I cannot do anything with it. How can I set a size, a new position, a source... ?
fl.openDocument("file:///C|/uiloader.fla");
var loaderIndex = fl.getDocumentDOM().library.findItemIndex("UILoader");
if (loaderIndex != "")
var loader = fl.getDocumentDOM().library.items[loaderIndex];
fl.documents[0].addItem({x:200,y:200}, loader);
I would like to create with JSFL a SWF that contain a UILoader placed somewhere with a specific size and specific source. And to inject in the swf some ActionScript to find this added UILoader to dynamically change the source of the image. This source will be finally given from the url. http://myswf.swf?imageSource=xxxxxx.jpg
Is it possible ?
Thank you.

It's a pity !
My problem is I tryed to save a FXG file containing images into a swf that will be able to change images sources dynamically.
To do that, I create an empty FLA document (using JSFL), I import the FXG file into the scene.
If I export my file into SWF in which I have injected this ActionSctipt :
for (var x = 0; x < numChildren; x++)
var e = getChildAt(x);
trace(e + " " + e.name +" is "+getQualifiedClassName(e));
I have this trace : [object MovieClip] _IMG_ is flash.display::MovieClip
I think I cannot change the source of a MovieClip using ActionScript. Maybe I'm wrong ?
So I would like to replace these objects (using JSFL) with UILoaders and setting the same x,y,width,height,source and then I will be able to change their sources using ActionScript.

ACROBAT 8 - HOW TO CONNECT AND USE THE LiveCycle Policy Server?

Hello everybody!!! I've just bought the ACROBAT 8.0, and I'm trying to use the LiveCycle Policy Server. The point is, I couldn't connect to the server.... is there any especific way to do it? It is the same configuration to connect to a normal web site server, right?
I need to control a copyrighted PDF over the web restricting the massive copy
THANK YOU VERY MUCH

No it's not exactly like connecting to a normal web server. The connection must be made via https, not http. So the app server has to be configured for SSL. Also the connection will not be made in Acrobat if there are ANY warnings about the SSL cert. So if you can't go to https://serverName:serverPort in IE and get there with no warnings then you won't be able to connect via Policy Server. Also, you can't connect to Policy Server via Acrobat using a Policy Server admin user. It must be a user who doesn't have admin privileges.
Chris
Adobe Enterprise Developer Support

How to parse and use the data that is coming as XML using DAL script

Hi,
I am trying to implement a solution where we are getting a doPublish request using EWPS webservice call which just contains a transaction id. I need to read a table using transaction id to get the xml. I know how to read the xpath and implement the solution if the XML is coming as input. If it stored on a table where Documaker should read and get the XML, how can we implement that?

If you are saying that your XML is stored in a table, I'm not sure there is any method, using DAL or rule, that would know how to load XML from there. I can be wrong, but I think it has to load the XML from disk only - either as the extract file or as an external file referenced from the extract - using a Rule or DAL to go after the external file.
Perhaps you could clarify the situation a little more and someone might offer a suggestion.

How to control and use the search criteria values "%" ?

Similar Messages

Maybe you are looking for