How to control the error messages (like Application..) in visual composer?

hi
is it possible to control the error message?
After creating the delivery using a BAPI function,
the return message is displayed in the table list if the transaction is succeeded.
But the error occurred, dialog box is showed (Application Message).
I just want to show the error message like being succeed in.
Regards,
Wooho.

Hi
You can try and use guard conditions or check the table for data, if there is no data in the table the application will return an error message.
Jarrod Williams

Similar Messages

  • How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

    During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error?  I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data?  If any one could help me that would be of great help.. Thanks

    Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

  • How to customize the error messages in web analysis reports

    Does anyone know how to customize the error messages that web analysis shows ,
    I want to customize the below error message with a custom error message
    "Document does not exist or no authorization to open document.Error occurred while loading document"
    Does anyone know how to do this ?

    Rajesh,
    you may want to check these links
    How to the Change the Application Stopped Message
    How to Change the Dispatcher Running, No Server Connected Message
    http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
    Thanks
    Bala Duvvuri

  • How to Handle the error message?

    Hi,
    Can any one help me in handling the error messages in application,
    In my application, I am having 2 buttons, one is display button, and the other is reset button. When we enter wrong inputs, it prompts an error message and again we I click on reset button the application goes back to its normal stage i.e. the error message will be disappears. These things will happen in the same page. I have tryed to know the any Id/Name of error message.
    So please help to handle error and skip that error then continue execute raming code.
    Thanks
    Buntty

    A few problems with this question that need clarification:
    You're using a GUI, but we have no way of knowing which one -- Swing? AWT? SWT? other?
    You ask how to fix your program flow and logic but don't show us the current state. Most of us can't read minds so a bit of code would be nice here.
    You mention "Page". What context is this in?
    A great resource that has helped me and will probably help you is an article entitled [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] . It will tell you how to formulate your questions so that the folks here will be better able to answer them. Good luck.

  • Please help me how concatenate all the error messages and send it as out parameter value.

    Hi Experts,
    Please help me how concatenate all the error messages and send it as out parameter value.
    Thanks.

    Agree with Billy, exception handling is not something that is done by passing parameters around.
    PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine.  Avoid misuing PL/SQL by trying to implement some other way of handling them.

  • How to Customize the Error Message when a user enters a wrong password

    Hi Gurus
    Pls Help out me that
    How to Customize the Error Message when a user enters a  wrong password ?
    I need the Help to Customize the messege ?
    How  we can do
    Pls Tell me indetail

    Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
    The file you need is actually a portal .par file and can be found in the deployment/pcd directory.  The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time). 
    You need to copy this file to a local machine and unzip the contents.  The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar.  It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
    In this file you will find lines like:
    NUMERIC_REQUIRED=Invalid new password (must contain digits)
    You need to identify which texts you wish to modify and edit the text to the right of the equals sign.  Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension.  Then logon to the portal and upload the new par and you should see your new logon messages.
    Haydn

  • I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

    I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
    Lg

    Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
    tt2

  • TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    Hi,
    This may be Helpful 
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • How to get the Error message from hr_contact_rel_api.create_contact

    Hello All,
    I am using this API for creating a contact for an employee in R12.
    But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
    I dont find any out msg data variables for this API in order to check it for the Error.
    So, can any body help me how to get the ERROR Message for such APIs.
    Thanks inAdvance,
    Amarnadh Js

    user12243334 wrote:
    solved the issue on myselfIt would be nice if you could share the solution with us.
    Thanks,
    Hussein

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • How to control an error message to display at the status bar or in a popup?

    Hi experts,
    I find that one of the error message in an user exit display at the status bar in some conditions while
    display in a pop up window in other conditions. Is there some way to control its display style as I want
    it? Thanks in advance.

    Hi,
      Use the below code....
    CALL FUNCTION 'PTRM_UTIL_MESSAGE_APPEND
    EXPORTING
    i_msgtype = 'I' or 'W' <because you want message to display otherthan error>
    i_msgid = <Your message id which you are using in user exit>
    i_msgnumber = <Your messge number>
    Or
    If you want to display the text in a pop up window instead of the above process then use 'POPUP_TO_DISPLAY_TEXT' to display the message text in the popup.
    Rgds,
    Bujji

  • How to End the Error message: "enter the password for the exchange account"

    i completed configure Exchange Account on my iPhone, but still show the error message:  "enter the password for the exchange account"

    make sure you don't have 2 step verification in gmail.
    otherwise you need to follow
    Signing in using application-specific passwords
    The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
    Some devices and applications that use these special passwords include:
    POP and IMAP email clients such as Outlook, Mail and Thunderbird
    Gmail and Google Calendar on smartphones
    ActiveSync for Windows Mobile and iPhone
    YouTube Mobile on Apple devices
    Cloud Print
    Installed chat clients such as Google Talk and Adium
    3D Warehouse, Sketchup, and installed applications
    AdWords Editor
    Sync for Google Chrome
    Gmail Notifier
    How to generate an application-specific password
      Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password: 
    Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
    Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
    You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
    Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
    Using application-specific passwords
    When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
    Enter your username.
    Enter your application-specific password in the password field.
    If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

  • How to delete the error message in the Web page Message Monitoring

    Hi All:
    I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
    But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
    How can I delete those message both successful and error.
    Thanks All
    Elliott

    Hi Elliot,
    SXMB_ADM
    Integration Engine Configuration
    Specific Configuration
    Category: DELETION
    Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
    Subparameters: SYNC, ASYNC
    Change "Current Value".
    and execute your delete job again!
    Regards,
    Udo

  • How to display the error message on screen in display mode

    Hi all,
    How to display error message as as status message on the screen(module pool).
    The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
    Thank you!
    Prasad

    Hi,
    Try as below.
    MESSAGE IXXX DISPLAY LIKE 'E'.
    LEAVE TO SCREEN XXXX.
    After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
    Regards,
    Nangunoori.

Maybe you are looking for

  • Force JRE installation in JNLP

    Hi. I would like to ask you guys whether it is possible to force the installation of JRE when trying to open JNLP file. It is quite often case when users try to run JWS application without JRE installed. The best option would be to force the installa

  • Installing oracle 9i release 2 on RH Linux Enterprise 4

    I am trying to install oracle 9i release and get an error with glibc - does anyone know what I need to do to a fresh installation of Enterprise 4 to install oracle 9i? Thanks in advance.

  • Vendor with material

    Hi, I have a vendor for one material. How can I connect the both (vendor and Material). ? Ca I do it In the Material masta data MM01? Thanks Dede

  • Change Published Replenishment Order

    Hi, I'm implementing SMI scenario with SAP SNC 5.1. I was traying to change a Published Replenishment Order, to do this i have: Created and published a Replenishment Order in SNC Web UI -> The Purchase Order is correctly created in customer Backend s

  • How many instance are running ?

    Dear Friends , how do i figure out how many instance are running on database? OR , How many database are running in a server ? Is it possible to find out from 'os' or 'database' level ? Waiting for ur kind reply ... ... Edited by: shipon_97 on Sep 4,