How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

Similar Messages

How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

How to control the depreciation for revaluation from next month ?

Dear all,
I post current year ord. depreciation revaluation via trx. ABAW (Bal. Sheet Revaluation), and the general ledger will be updated after depreciation run.
In our client, the scenario is AFAB (dep run) --> ABAW (revaluation) --> AFAB (dep repeat run).
Now my problem is I want the revaluation value be depreciated next month and the second AFAB just for general ledger posting. I have set the period control '11'(next month) for revaluation but it doesn't work, the second AFAB still generates both G/L and depreciation posting.
How can I control the revaluation depreciation from next month?
Thanks for your help.

Hi,
we have used a different approach. We run two separate depreciation areas:
01 - ordinary depreciation
03 - revaluation
We maintain two complete streams of data. 01 is linked to the original acquisition value of the asset and depreciates normally.
03 is linked to the revaluation. Each month we recalculate the replacement value, revalue the accumulated depreciation and then run depreciation using transaction AFAB.
I don't think it will work in the way you described.
Kind regards,
Rudolf

Help: how to set the permission for filesystem folder

I have been created a Windows FileSystem repository. and I can access it when I am Administrator. but I can not access it using another user. How can I make these user can access that folder?
thanks, best regards
George

You need to do the user mapping of the user to their windows id and password. Make sure it is in the format DOMAIN/username. Your administrator can see them because they are a special user called a system principle.
Paul

How to set up permission for portal objects and folder

Hi All,
We are implementing EP 7.0. For creating portal objects, I have assigned "Super_admin, Content_admin, System_admin and User_admin" role to my userid and created iviews, roles and folder.
During SAP audit they asked us to open a Iview to show the permission,   the below are the value shown in permission editor.
Role Name           ====== Administrator ===== End User ======Role Assigner
Everyone             ====== Read            ======Yes        ====== No
Super_admin_role ====== Owner            =====Yes         ======Yes
SAP asked us to change the permission and said "Super_admin_role" should not be used, they asked us to create a group or role and assign. We are not clear what SAP wanted us to do.
Can any one let me know how this permission needs to be given and whether "Super Admin" role can be assigned to a userid.
Thanks in advance.
Rgards,
H.K.Hayath Basha.

Hi Michael,
I didn't create any role. I will let yo know what I have done so far.
1. Created a group called "ADMIN_GROUP".
2. Assigned "SUPER_ADMIN" role to group "ADMIN_GROUP.
3. Assigned userid "ADMIN_USER" to group "ADMIN_GROUP".
4. Opened the persmission of "PORTAL_CONTENT" folder and added group "ADMIN_GROUP" and set this group as "OWNER", "END_USER" check box is ticked and "ROLE_ASSIGNER" check box is checked.
5. Removed the role "SUPER_ADMIN" from group "ADMIN_GROUP".
6. Logged into portal using "ADMIN_USER" created a folder called "TESTING". Then opened the
    permission editor for the folder "TESTING", it showed three record
    "ADMIN_GROUP"           === OWNER === 'X' === 'X'
    "EVERY_ONE"               === READ     === 'X' === ' '
    "SUPER_ADMIN_ROLE. === OWNER === 'X' === 'X'
7. I am not able to delete "SUPER_ADMIN_ROLE" from the permission editor, as it is greyed.
With the above steps what I have achieved is I have given permission to group "ADMIN_GROUP". Is this what we need to do. Did I did anything wrong.
Regards,
H.K.Hayath Basha.

SSRS How to grant BROWSE permission for reports for all the application users?

Hello,
Problem Statement
I need to allow all of my application users to browse the SSRS reports via logging onto the Report Manager and to some other I even want them to use Report Builder to modify & upload the report.
How could I achieve this.
Environment & Current implementation
We use SQL Server 2012 reporting services.
Custom authentication has been implemented using IAuthenticationExtension Interface. For more details, please refer
this msdn link.
Currently, for each new user created in the application, the admin has to manually give BROWSER role to the username to enable that newly created user to browse the reports.
Is there any way in which we can give "everyone" the BROWSE permission and get rid of this manual permission granting process?
Please feel free to ask for any additional information you need to help me on this issue.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi vinaypugalia,
According to your description, you want to grant permissions for users to access report server in a batch, right?
In your scenario, you can use
script files( AddItemSecurity.rss and ConfigureSystemProperties.rss )with the Reporting Services SOAP API to assign permissions. It’s better that you add those users to a user group then run those script.
Similar thread for your reference:
SQL script to grant user permissions for SQL Server Reporting Services
Programmatically adding users to SSRS?
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to control the timeout for StreamSocket.ConnectAsync(), and StreamSocketListener.AcceptAsync()?

I can not file API to do this.Ray_ni

Hi Ray,
Here is a simple sample...
async void btnGetData_Click(object sender, RoutedEventArgs e)
// separated all this out so it is clearer:
//Create a socket
StreamSocket aSocket = new StreamSocket();
//Cancellation token is inspected to determine if the async method should be cancelled
CancellationTokenSource cts = new CancellationTokenSource();
//In this case, after 2 seconds... signal cancel
cts.CancelAfter(2000);
//get the operation
StreamSocketConnectOperation op = aSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "22112", SocketProtectionLevel.PlainSocket);
//Create a task and pass the cancellation token
Task aTask = op.StartAsTask(cts.Token);
try
//kick off the task and wait for a result!
await aTask;
catch(TaskCanceledException tcEx)
string a = "Task Cancelled: " + tcEx.Message;
catch(Exception theEx)
string b = "Exception: " + theEx.Message;
finally
string c = "done, still might have had an exception though";
Enjoy!
-Jeff
Jeff Sanders (MSFT)

How to set the permission of RMAN in Linux?

I have installed oracle XE in Centos, however, when I try to access to RMAN by
rman target /
it shows the error message
[root@localhost bin]# rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Oct 11 17:50:34 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ========
RMAN-00571: ================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-09925: Unable to create audit trail file
Linux Error: 13: Permission denied
Additional information: 9925
ORA-01031: insufficient privileges
I would like to ask how to set the permission for root to use rman ?
Thank you very much ~!!

Check first if the directory where you save the auditing information is owned by oracle:dba.
Regards
Aron

How to control the bandwidth of my router WRT54G3G

hi all
plz i need to know how to control the bandwidth for all pc connect through the router ?
thank you

Logon to router’s setup page, click on “Applications & Gaming”, click on QoS…you can manage bandwidth using a QoS feature.

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to control the looping time of the for loop in 10 microseconds in labview?

I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

I'm not sure if this will hep, but this answer seems to answer this question
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

How the data is fetched from the cube for reporting

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
Cube B     *****                     E   *****                      42.002653 *****                  1,669,126            *****                    6
Cube B     *****                     F *****                     98.696442    *****                  2,426,006       *****                    6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan

Toolkit for CreateJS: How to control the main timeline from outside the canvas.

Hey Everyone,
I'm currently trying to do something simple, but my animation breaks whenever I attempt to change my code. I have created a basic animation in Flash where an object moves from the left side of the canvas, to the right, and then loops from the last frame to the first frame. Nothing else. The animation is simply put on the main timeline. I exported the animation with Toolkit for CreateJS through Flash's extension and the animation runs as it should. I am trying to start and stop (restarting from the first frame) the animation with mouse over and mouse off events. I want the events to fire when moused over/off a div OUTSIDE the animation's canvas tag. Is this possible with CreateJS? I'm trying to figure out how to control the main timeline without being inside the canvas tag.
Example HTML:
http://www.thephotoncore.com/testing/example_test.html
Example Code:
<section id="container">
<canvas id="canvas" width="550" height="400" style="background-color:#cccccc"></canvas>
<section id="animation_control">
    <p>Roll over to start and stop animation.</p>
</section>
</section>
Thanks again for the help!
-DJ

Hi DjPhantasy5,
All movieclips on the stage are children of the stage,
So on the "mouseover" all movieclips on the stage could be stopped with stop and on the "mouseout" all children could be restarted with gotoAndPlay like this:
function Stop()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("stop" in child)
                                        child.stop();
function Restart()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("gotoAndPlay" in child)
                                        child.gotoAndPlay(0);
See http://www.liauw.nl/forums/adobe/djfantasy5/index.html
But it is also possible to expose "ball1", for example, by adding it to the document.
This can be done by adding code to "ball1" like so:
/* js
document.ball1 = this;
Then the stopping of the animation would look like:
function Stop()
     if ("ball1" in document)
          document.ball1.stop();
etc.
Have fun!
Ronald

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

How to control the permission for reports in share folder?

Similar Messages

Maybe you are looking for