How to copy actual data into current forecast period

Hi gurus.
I need your guidance on how to copy actual data into current forecast period.
This is my case. Let's say I have the following figures for my actuals:
January 2007 Actual = $110,000.
February 2007 Actual = $120,000.
March 2007 Actual = $80,000.
April 2007 Actual = $100,000.
Now, my user want to choose any month as the basis for her forecast for the remaining periods. Let's say, she wanted to choose April 2007 Actual as the basis for the remaining forecast periods, so I should be able to display the following figures in my planning folder:
May 2007 Forecast = $100,000.
June 2007 Forecast = $100,000.
July 2007 Forecast = $100,000.
August 2007 Forecast = $100,000.
September 2007 Forecast = $100,000.
October 2007 Forecast = $100,000.
November 2007 Forecast = $100,000.
December 2007 Forecast = $100,000.
Can someone guide me on how to do that?
Points will be given to good and best answers.
Thanks.

Hi Fulham,
Technical answer:
First, you need to allow your user to indicate wich month is the reference for the copy. I suggest you to add a new key figure in your actual layout (a 'customizing' layout) that your user will use as a flag:
January 2007 Actual = $110,000
January 2007 Flag = 0
February 2007 Actual = $120,000
February 2007 Flag = 0
March 2007 Actual = $80,000
March 2007 Flag = 0
April 2007 Actual = $100,000
April 2007 <b>Flag = 1</b>
<i>(Help to a fox or an abap exit you can check that only one month is 'flagged')</i>
Then, in the corresponding level for the data input, you use a function exit in Abap, which will:
- read the previous customizing layout help to API_SEMBPS_GETDATA so you can get the flagged month and its actual amount ($100,000)
- generate the news rows into the table XTH_DATA which will be automatically posted in the level with the actual amount
Is that clear?
Regards,

Similar Messages

RS232 and how to build some datas into a waveform

Hello everyone !
I would like to ask you a question about how to build some datas into waveform.
Let's me explain :
Actually, I am working on a project with a PIC.
The PIC sent 3 informations to Laview by RS 232 :'velocity;current;tension\n'
Lynn and Crossrulz help me to make a diagram that allows to read datas and displays them with charts.
It works perfectly.
Now, I would like to display some datas from a sensor (dynamic datas) and double datas from RS232 on the same chart with different plot.
So, I have to build double datas into waveform, convert double datas into dynamic datas.
I have tried something : I used 'Convert to dynamic data' function but it doesn't work and I don't know why.
Can you help me ?
I join you :
- VI
- a gif that shows what's happening
- screenshot
Notice : I used 'simulate signal' to represent a sensor
Thanks for your help
Attachments:
test5.vi ‏84 KB
test7.gif ‏685 KB
diagram.JPG ‏77 KB

Hello Crossrulz !
Thanks again for your help.
I have found Build Waveform but I get a strange result.
As first step, I have simplified my problem and I have just tried to build a waveform from my datas.
Since Build Waveform must have an array as input, I have used Array Subset.
As result, I don't get a plot but if you pay attention, you can see a little white dot around my value.
How can I fix that ?
Thanks again
Attachments:
test_build_waveform.vi ‏19 KB
diagram2.JPG ‏59 KB
build_waveform.gif ‏597 KB

How to copy a report into my namespace

how to copy a report into my namespace as said in this blog....
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages

how to copy it my namespace
I didn't get what exactly you mean?
If you run any interface you will find its details in SXMB_MONI.
This report will pickup the data from Moni and resend the message. So its not Interface specific.
You copy the report from SE38 and try.
Gaurav Jain
Reward Points if answer is helpful

Copy actual data to plan version

Dears,
I have a requirement wherein business has maintained plan data for balance sheet GLs in GP12N for version 1 for 6 months. Now the requirement is to copy actual data of first 6 months to next 6 months in version 2 (forecast) and start comparing actual/plan/forecast. I tried copying in FAGLGP52N, but it allows only from plan version to another plan version.
Please suggest if there is a way to copy actual data to plan version.
I have another requirement to display plan version data of cost element (PL) which we maintain in KP06/7KE1 in F.01.
Thanks,
Lokesh

Try to use Plan version (000) where the Actual values are posted in this version.
Cheers,
Sarhan.

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

Step- by- Step on How to Load Excel data into Crystal Reports?

Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
Vijay

It's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

How to populate the data into the newly added infoobjects?

Hi,
how to populate the data into the newly added infoobjects?
Thanx in advance,
Ravi.

hi ravi,
here is one example how to enhance.
Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
save it and avtivate the code.
Hope this Is helpz,
partha

How do I load data into my palm??

Hi
I was wondering how I can get new data for my database into my palm. I've got a text-database and I want to try to get it in the Palm and make a program for it.
So my problem is: How can I get data into the mobile device without typing it myself.
Stillgar

Take a look at http://forum.java.sun.com/thread.jsp?forum=76&thread=266095 to see a suggestion for a way of creating RMS's on the PC. You could use this to convert your textfile to RMS format.
Jouster

Proxy creation/ access key in the how to guide "push data into BW from XI"

Hi !
I'm experiencing troubles with a step of the how to guide "push Data into BW from XI".
When i want to create the proxy in the BW system (step 10), i'm asked for an access key for the object R3TR CLAS CL_<name of the prefix>_<name of message interface>
I think that access keys are needed when an object has to be modified. Do I really have to modify this SAP object ? I don't really feel like destroying the whole system...
Thanks in advance !

Hi Benjamin,
you are not destroying anything in the system. Since you generating a class for the implementation of the proxy within the SAP name space, you are asked for the access key (you can register developers and objects via the OSS).
The system behavior depends on the setting of the system, whether changes are are recorded, etc..
Ask your basis administrator, who should be able to assist you.
Cheers
Andreas

How to import csv data into Oracle using c#

Hello,
How to import csv data into Oracle using c #. Where data to be imported 3GB in size and number of rows 7512263. I've managed to import csv data into Oracle, but the time it takes about 1 hour. How to speed up the time it takes to import csv data into oracle. Thank you.
This is my code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Diagnostics;
using System.Threading;
using System.Text.RegularExpressions;
using System.IO;
using FileHelpers;
using System.Data.OracleClient;
namespace sqlloader
class Program
static void Main(string[] args)
int jum;
int i;
bool isFirstLine = false;
FileHelperEngine engine = new FileHelperEngine(typeof(XL_XDR));
//Connect To Database
string constr = "Data Source=(DESCRIPTION=(ADDRESS_LIST="
+ "(ADDRESS=(PROTOCOL=TCP)(HOST= pt-9a84825594af )(PORT=1521 )))"
+ "(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=o11g)));"
+ "User Id=xl;Password=rahasia;";
OracleConnection con = new OracleConnection(constr);
con.Open();
// To Read Use:
XL_XDR[] res = engine.ReadFile("DataOut.csv") as XL_XDR[];
jum = CountLinesInFile("DataOut.csv");
FileInfo f2 = new FileInfo("DataOut.csv");
long s2 = f2.Length;
int jmlRecord = jum - 1;
for (i = 0; i < jum; i++)
ShowPercentProgress("Processing...", i, jum);
Thread.Sleep(100);
if (isFirstLine == false)
isFirstLine = true;
else
string sql = "INSERT INTO XL_XDR (XDR_ID, XDR_TYPE, SESSION_START_TIME, SESSION_END_TIME, SESSION_LAST_UPDATE_TIME, " +
"SESSION_FLAG, VERSION, CONNECTION_ROW_COUNT, ERROR_CODE, METHOD, HOST_LEN, HOST, URL_LEN, URL, CONNECTION_START_TIME, " +
"CONNECTION_LAST_UPDATE_TIME, CONNECTION_FLAG, CONNECTION_ID, TOTAL_EVENT_COUNT, TUNNEL_PAIR_ID, RESPONSIVENESS_TYPE, " +
"CLIENT_PORT, PAYLOAD_TYPE, VIRTUAL_TYPE, VID_CLIENT, VID_SERVER, CLIENT_ADDR, SERVER_ADDR, CLIENT_TUNNEL_ADDR, " +
"SERVER_TUNNEL_ADDR, ERROR_CODE_2, IPID, C2S_PKTS, C2S_OCTETS, S2C_PKTS, S2C_OCTETS, NUM_SUCC_TRANS, CONNECT_TIME, " +
"TOTAL_RESP, TIMEOUTS, RETRIES, RAI, TCP_SYNS, TCP_SYN_ACKS, TCP_SYN_RESETS, TCP_SYN_FINS, EVENT_TYPE, FLAGS, TIME_STAMP, " +
"EVENT_ID, EVENT_CODE) VALUES (" +
"'" + res.XDR_ID + "', '" + res[i].XDR_TYPE + "', '" + res[i].SESSION_START_TIME + "', '" + res[i].SESSION_END_TIME + "', " +
"'" + res[i].SESSION_LAST_UPDATE_TIME + "', '" + res[i].SESSION_FLAG + "', '" + res[i].VERSION + "', '" + res[i].CONNECTION_ROW_COUNT + "', " +
"'" + res[i].ERROR_CODE + "', '" + res[i].METHOD + "', '" + res[i].HOST_LEN + "', '" + res[i].HOST + "', " +
"'" + res[i].URL_LEN + "', '" + res[i].URL + "', '" + res[i].CONNECTION_START_TIME + "', '" + res[i].CONNECTION_LAST_UPDATE_TIME + "', " +
"'" + res[i].CONNECTION_FLAG + "', '" + res[i].CONNECTION_ID + "', '" + res[i].TOTAL_EVENT_COUNT + "', '" + res[i].TUNNEL_PAIR_ID + "', " +
"'" + res[i].RESPONSIVENESS_TYPE + "', '" + res[i].CLIENT_PORT + "', '" + res[i].PAYLOAD_TYPE + "', '" + res[i].VIRTUAL_TYPE + "', " +
"'" + res[i].VID_CLIENT + "', '" + res[i].VID_SERVER + "', '" + res[i].CLIENT_ADDR + "', '" + res[i].SERVER_ADDR + "', " +
"'" + res[i].CLIENT_TUNNEL_ADDR + "', '" + res[i].SERVER_TUNNEL_ADDR + "', '" + res[i].ERROR_CODE_2 + "', '" + res[i].IPID + "', " +
"'" + res[i].C2S_PKTS + "', '" + res[i].C2S_OCTETS + "', '" + res[i].S2C_PKTS + "', '" + res[i].S2C_OCTETS + "', " +
"'" + res[i].NUM_SUCC_TRANS + "', '" + res[i].CONNECT_TIME + "', '" + res[i].TOTAL_RESP + "', '" + res[i].TIMEOUTS + "', " +
"'" + res[i].RETRIES + "', '" + res[i].RAI + "', '" + res[i].TCP_SYNS + "', '" + res[i].TCP_SYN_ACKS + "', " +
"'" + res[i].TCP_SYN_RESETS + "', '" + res[i].TCP_SYN_FINS + "', '" + res[i].EVENT_TYPE + "', '" + res[i].FLAGS + "', " +
"'" + res[i].TIME_STAMP + "', '" + res[i].EVENT_ID + "', '" + res[i].EVENT_CODE + "')";
OracleCommand command = new OracleCommand(sql, con);
command.ExecuteNonQuery();
Console.WriteLine("Successfully Inserted");
Console.WriteLine();
Console.WriteLine("Number of Row Data: " + jmlRecord.ToString());
Console.WriteLine();
Console.WriteLine("The size of {0} is {1} bytes.", f2.Name, f2.Length);
con.Close();
static void ShowPercentProgress(string message, int currElementIndex, int totalElementCount)
if (currElementIndex < 0 || currElementIndex >= totalElementCount)
throw new InvalidOperationException("currElement out of range");
int percent = (100 * (currElementIndex + 1)) / totalElementCount;
Console.Write("\r{0}{1}% complete", message, percent);
if (currElementIndex == totalElementCount - 1)
Console.WriteLine(Environment.NewLine);
static int CountLinesInFile(string f)
int count = 0;
using (StreamReader r = new StreamReader(f))
string line;
while ((line = r.ReadLine()) != null)
count++;
return count;
[DelimitedRecord(",")]
public class XL_XDR
public string XDR_ID;
public string XDR_TYPE;
public string SESSION_START_TIME;
public string SESSION_END_TIME;
public string SESSION_LAST_UPDATE_TIME;
public string SESSION_FLAG;
public string VERSION;
public string CONNECTION_ROW_COUNT;
public string ERROR_CODE;
public string METHOD;
public string HOST_LEN;
public string HOST;
public string URL_LEN;
public string URL;
public string CONNECTION_START_TIME;
public string CONNECTION_LAST_UPDATE_TIME;
public string CONNECTION_FLAG;
public string CONNECTION_ID;
public string TOTAL_EVENT_COUNT;
public string TUNNEL_PAIR_ID;
public string RESPONSIVENESS_TYPE;
public string CLIENT_PORT;
public string PAYLOAD_TYPE;
public string VIRTUAL_TYPE;
public string VID_CLIENT;
public string VID_SERVER;
public string CLIENT_ADDR;
public string SERVER_ADDR;
public string CLIENT_TUNNEL_ADDR;
public string SERVER_TUNNEL_ADDR;
public string ERROR_CODE_2;
public string IPID;
public string C2S_PKTS;
public string C2S_OCTETS;
public string S2C_PKTS;
public string S2C_OCTETS;
public string NUM_SUCC_TRANS;
public string CONNECT_TIME;
public string TOTAL_RESP;
public string TIMEOUTS;
public string RETRIES;
public string RAI;
public string TCP_SYNS;
public string TCP_SYN_ACKS;
public string TCP_SYN_RESETS;
public string TCP_SYN_FINS;
public string EVENT_TYPE;
public string FLAGS;
public string TIME_STAMP;
public string EVENT_ID;
public string EVENT_CODE;
I hope someone can give me a solution. Thanks

The fastest way is to use external tables or sql loader (sqlldr). (If you use external tables or sql loader, you don't use C# at all).

How to load oracle data into SQL SERVER 2000?

how to load oracle data into SQL SERVER 2000.
IS THERE ANY UTILITY AVAILABLE?

Not a concern for an Oracle forum.
Als no need for SHOUTING.
Conventional solutions are
- dump the data to a csv file and load it in Mickeysoft SQL server
- use Oracle Heterogeneous services
- use Mickeysoft DTS
Whatever you prefer.
Sybrand Bakker
Senior Oracle DBA

How to convert system Date into DD-MMM-YYYY Format

hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
Yogesh

HI..
data: w_dt(11) type c,
         w_month(2),
         w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-'   p_date0(4) into w_dt.
write w_dt.

How to store xml data into file in xml format through java program?

HI Friends,
Please let me know
How to store xml data into file in xml format through java program?
thanks......
can discuss further at messenger.....
Avanish Kumar Singh
Software Engineer,
Samsung India Development Center,
Bangalore--560001.
[email protected]

Hi i need to write the data from an XML file to a Microsoft SQL SErver database!
i got a piece of code from the net which allows me to parse th file:
import java.io.IOException;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import org.apache.xerces.parsers.SAXParser;
import java.lang.*;
public class MySaxParser extends DefaultHandler
private static int INDENT = 4;
private static String attList = "";
public static void main(String[] argv)
if (argv.length != 1)
System.out.println("Usage: java MySaxParser [URI]");
System.exit(0);
String uri = argv[0];
try
XMLReader parser = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
MySaxParser MySaxParserInstance = new MySaxParser();
parser.setContentHandler(MySaxParserInstance);
parser.parse(uri);
catch(IOException ioe)
ioe.printStackTrace();
catch(SAXException saxe)
saxe.printStackTrace();
private int idx = 0;
public void characters(char[] ch, int start, int length)
throws SAXException
String s = new String(ch, start, length);
if (ch[0] == '\n')
return;
System.out.println(getIndent() + " Value: " + s);
public void endDocument() throws SAXException
idx -= INDENT;
public void endElement(String uri, String localName, String qName) throws SAXException
if (!attList.equals(""))
System.out.println(getIndent() + " Attributes: " + attList);
attList = "";
System.out.println(getIndent() + "end document");
idx -= INDENT;
public void startDocument() throws SAXException
idx += INDENT;
public void startElement(String uri,
String localName,
String qName,
Attributes attributes) throws SAXException
idx += INDENT;
System.out.println('\n' + getIndent() + "start element: " + localName);
if (localName.compareTo("Machine") == 0)
System.out.println("YES");
if (attributes.getLength() > 0)
idx += INDENT;
for (int i = 0; i < attributes.getLength(); i++)
attList = attList + attributes.getLocalName(i) + " = " + attributes.getValue(i);
if (i < (attributes.getLength() - 1))
attList = attList + ", ";
idx-= INDENT;
private String getIndent()
StringBuffer sb = new StringBuffer();
for (int i = 0; i < idx; i++)
sb.append(" ");
return sb.toString();
}// END PRGM
Now , am not a very good Java DEv. and i need to find a soln. to this prob within 1 week.
The next step is to write the data to the DB.
Am sending an example of my file:
<Start>
<Machine>
<Hostname> IPCServer </Hostname>
<HostID> 80c04499 </HostID>
<MachineType> sun4u [ID 466748 kern.info] Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 360MHz) </MachineType>
<CPU> UltraSPARC-IIi at 360 MHz </CPU>
<Memory> RAM : 512 MB </Memory>
<HostAdapter>
<HA> kern.info] </HA>
</HostAdapter>
<Harddisks>
<HD>
<HD1> c0t0d0 ctrl kern.info] target 0 lun 0 </HD1>
<HD2> ST38420A 8.2 GB </HD2>
</HD>
</Harddisks>
<GraphicCard> m64B : PCI PGX 8-bit +Accel. </GraphicCard>
<NetworkType> hme0 : Fast-Ethernet </NetworkType>
<EthernetAddress> 09:00:30:C1:34:90 </EthernetAddress>
<IPAddress> 149.51.23.140 </IPAddress>
</Machine>
</Start>
Note that i can have more than 1 machines (meaning that i have to loop thru the file to be able to write to the DB)
Cal u tellme what to do!
Even better- do u have a piece of code that will help me understand and implement the database writing portion?
I badly need help here.
THANX

How to export image data into XDP

Hi, All
I'm working on a healthcare project that needs to export the doctor's signature image into XDP file from the database to fill in the Insurance company claim form. My question is how to export image data into a field node in the XDP file, we know the name of the image field which defined in the PDF form, Is it something like:
the signature image data ?
Should the image data in this node be base64 encoded or text encoded or something else?
Can the image be any kind? e.g. BMP, PNG, JPEG, ..., etc?
Thanks
William

Hi Andre,
Document will be of ASCII characters right?? but image data will be in binary format. as per database concept it is stored as binary large object. But in datawarehousing the back end is also going to be some database such as Oracle or other DBs.
which can take blob's. so it would be possible to store the binary data.
If any one has faced this situation can reply.to this ques.
can post the step to load image(jpg/bmp or any image format) data in to info cube??
hi andre if u have done loading image data as you say.pls reply me if you have the steps with you.
thanks Andre

How to maintain the data into database table

Hi,
experts,
how to maintain the data into database table

There are several ways to maintain data in the database
1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
2. Loginto SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
3. Through Se16 as well.
4. A small abap program can do the above task as well.
Thanks,
Raj
Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

How to copy actual data into current forecast period

Similar Messages

Maybe you are looking for