How to copy and paste the text in Russian - 'command+c' erases it
How to copy and paste the text in Russian - 'command+c' erases it
I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(
Similar Messages
-
How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.
Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
> -
When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time.When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time. -
Can I copy and paste the texts or graphics to another project?
Hi folks, I am working on several movie clips which share the same graphics and most contents as beginning intro. Just a few sentences are different. If would be so much hassle if I had to type everything and import the images to every clips. I noticed that I can't open two projects at the same time. So I am wondering if I can group them, copy and paste them to another project? Is it doable?
Thanks a lot for your time!Unfortunately, you have posted to the Tips & Tricks sub-forum, which is a repository for articles on how to do things in PrE & PrPro. Maybe Steve Grisetti, our tireless MOD, can move your post to the main forum, where more folk will see it, and can comment on it.
In the meantime, you are correct - one cannot have two Projects Open at the same time, and you cannot Copy/Paste between Projects, without an additional program, like the Clipboard extender, ClipMate. That is one way to get what you want.
Possibly there is another way to do what you want, without any additional programs. If you have Titles, and they will only change by a bit, you can create a "master" Title with graphics, text, Styles, etc., and then Save each as a Template, which can be used in multiple Projects, and also altered/edited in those Projects, as is needed. Everytime that I create a Title, with potential for reuse, I just do the Export as Template (the exact syntax might differ by version, but the result is the same - a PRTL Title Template file, located where you direct the program), and then those will appear in my Title "organizer" to be chosen. When one Imports one, they can be edited, as needed.
If one has an Intro, that will be reused, then one could create that, with any audio, images and Titles, and Export/Share as a DV-AVI, or similar, for later use. Note: with this method, one could not directly edit any Titles in such an Asset, as they would no longer be official Titles, and would be footage in an AV Clip. One could Cut out a Title, and replace it with a real Title, but then one would have to adjust for Transitions, if any were used. Still, I have some Intros, and Outros, that are constant, like The End Outros, and I use the Exported AV Clips there. In some cases, I leave the Intro, or Outro slightly unfinished, so that I can just add in, say a Title for each use in other Projects.
Good luck, and when the post is moved to the main forum, there will probably be some additional comments on slightly different workflows.
Hunt -
How to copy and paste the same answer choices multiple times
I am making testing forms and each question has the same multiple choice answer selection. I have been having to type each one of them individually instead of being able to duplicate it for each question. How can I do what in Word would just be a "copy and paste" function?
So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors. -
i have some some main problems with this phone . the browser is not good . i want opera or uc browser in store . i not able to copy or paste any text msgs ,this is a problem. i have seen that when i try to update my phone , it showing error . i seen something is there that is too gud in this phone . i requisted firefox to increase its problem solving and make good and user friendly os like android . there are many things which i like very much on this phone but , on the same side there are lots of backlogs are there .
such as :
1)no whats app (connect a2 app is there but i didnot like it .bec its very slow n giving me too much problem)
2)keyboard is very hard to type because its width is low ,so i cant able to type gud . atleast chage it in u r next update.
3)the browser is not good . giving many problem in downloading and looses its data after i close it . its forfotting my data like passwords every time.
4) file manager is too slow .( taking much time for loading ).Hi rajkumarukkuturi,
Thank you for your feedback, however all of the feedback for the developers can be submitted at input.mozilla.org.
If you need any support, please consider creating a new thread containing the specific details of your issue.
Doing so will allow the Mozilla volunteers to give you solutions that are more helpful to you. This may help them to solve your problem faster and more efficiently.
Please, feel free to post the link to your thread on this thread for volunteers interested in assisting you.
Thank you. -
How to copy and paste the data directly from the excel to the PDF?
hi,
I have found the same question on the link:
How to copy excel sheet to pdf form?
But I didnt get my answer through that forum.
My requirement is dat I should copy the data from excel sheet and directly paste it to PDF form.
When I am trying to copy and paste ..all the data is getting pasted into a single block only.
Kindly help.
Thanks & Regards,
LinaSo you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors. -
How to copy and paste the whole word or excel form in the infopath form control
Is there any control in infopath 2010. when the form will be open and users wants then can copy whole word or excel form on this control.
and in word form there is also a control.Hi John,
You can do as the followings:
Create a blank form with InfoPath Designer 2010,
Add a Rich Text Box control and Submit button in the blank form
Publish the form to your SharePoint site
Open the form library and create a document
Copy the table with text from word file
Paste the table in the Rich Text Box area, the paste option is Keep Source Formatting
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
How to copy and paste the solution files of SharePoint 2010 from one machine to another machine?
Hi,
I was working with SharePoint 2010 in one of my Virtual machines.Now that the lease for my Virtual Machine is going to expire, I want to shift the entire contents of the project to another machine (local) with SharePoint 2010. Also, I want the pages
in the other machine to be editable.
How can I copy the solution files to the other machine? And I want the exact path where the files are located, so that I can shift them to the other machine.
Thanks in advance....that's not a good approach.
Deploying customisations can be as simple as files being copied onto the file system. Most of the time however there is a lot more happening behind the scenes and simply copying the files won't work.
Also that is assuming that you mean solutions rather than the pages themselves (or the contents of document libraries) in which case you want to copy databases, not just files.
SharePoint isn't a simple thing to move, you may need to look at this a bit harder. -
I searched the site for a fix but the instructions weren't very clear about inserting files and lines. I could not find the user.js file and i was not sure how to create a file, but i could create a folder. Could I use a microsoft word file or what?
See http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper -
How to copy and paste the node?
please help~~~
不知道这里有没有搞这个的中国人啊~~~说英文实在是件很麻烦的事。。。。。。。
Edited by: user12393902 on 2009/12/28 23:32--節点のレベルを判別する、ラベル<>1の場合、子節点の下で新たな節点を追加する
IF ( PKG_変数.NODE_DEPTH_STR != 1 ) THEN
GO_BLOCK('EMP');
FIRST_RECORD;
FOR CNT_NODE IN 1..CNT_EMP-1 LOOP
IF ( :EMP.CHK = '1' ) THEN
LV_NODE_LABEL := :EMP.ENAME;
LV_NODE_VALUE := :EMP.EMPNO;
--SET_ALERT_PROPERTY('ALT',ALERT_MESSAGE_TEXT,'PKG_変数.NODE_LABEL_STR:'||PKG_変数.NODE_LABEL_STR);
--RET := SHOW_ALERT('ALT');
CHILD_NODE := FTREE.ADD_TREE_NODE( HTREE,
PKG_変数.TRIGGER_NODE_STR,
FTREE.PARENT_OFFSET,
FTREE.LAST_CHILD,
FTREE.EXPANDED_NODE,
LV_NODE_LABEL,
NULL,
LV_NODE_VALUE );
END IF;
NEXT_RECORD;
END LOOP;
IF ( :EMP.CHK = 1 ) THEN
LV_NODE_LABEL := :EMP.ENAME;
LV_NODE_VALUE := :EMP.EMPNO;
CHILD_NODE := FTREE.ADD_TREE_NODE( HTREE,
PKG_変数.TRIGGER_NODE_STR,
FTREE.PARENT_OFFSET,
FTREE.LAST_CHILD,
FTREE.EXPANDED_NODE,
LV_NODE_LABEL,
NULL,
LV_NODE_VALUE );
END IF;
--節点のレベルを判別する、ラベル=1の場合、新たな根節点を追加する
ELSE
GO_BLOCK( 'DEPT' );
GO_RECORD( :SYSTEM.CURSOR_RECORD );
NODE_LABEL := :DEPT.DEPT_NAME;
NODE_VALUE := :DEPT.DEPT_NO;
HTREE := FIND_ITEM( 'BLCK_TREE.TREE' );
NEW_NODE := FTREE.ADD_TREE_NODE( HTREE,
FTREE.ROOT_NODE,
FTREE.PARENT_OFFSET,
FTREE.LAST_CHILD,
FTREE.EXPANDED_NODE,
NODE_LABEL,
NULL,
NODE_VALUE );
GO_BLOCK('EMP');
FIRST_RECORD;
FOR CNT_NODE IN 1..CNT_EMP-1 LOOP
IF ( :EMP.CHK = '1' ) THEN
LV_NODE_LABEL := :EMP.ENAME;
LV_NODE_VALUE := :EMP.EMPNO;
FIND_NODE := FTREE.FIND_TREE_NODE( HTREE,
NODE_VALUE,
FTREE.FIND_NEXT,
FTREE.NODE_VALUE,
FTREE.ROOT_NODE,
FTREE.ROOT_NODE );
CHILD_NODE := FTREE.ADD_TREE_NODE( HTREE,
FIND_NODE,
FTREE.PARENT_OFFSET,
FTREE.LAST_CHILD,
FTREE.EXPANDED_NODE,
LV_NODE_LABEL,
NULL,
LV_NODE_VALUE );
--SET_ALERT_PROPERTY('ALT',ALERT_MESSAGE_TEXT,'LV_NODE_VALUE:'||LV_NODE_VALUE);
--RET := SHOW_ALERT('ALT');
END IF;
NEXT_RECORD;
END LOOP;
IF ( :EMP.CHK = 1 ) THEN
LV_NODE_LABEL := :EMP.ENAME;
LV_NODE_VALUE := :EMP.EMPNO;
FIND_NODE := FTREE.FIND_TREE_NODE( HTREE,
NODE_VALUE,
FTREE.FIND_NEXT,
FTREE.NODE_VALUE,
FTREE.ROOT_NODE,
FTREE.ROOT_NODE );
CHILD_NODE := FTREE.Add_Tree_Node( HTREE,
FIND_NODE,
FTREE.PARENT_OFFSET,
FTREE.LAST_CHILD,
FTREE.EXPANDED_NODE,
LV_NODE_LABEL,
NULL,
LV_NODE_VALUE );
END IF;
END IF; -
How can i copy and paste the list paragraph?
I uses the 'Pages' and have a problem to copy text to 'Mail' application from 'Pages'
The text with list like '1. blarblar' can't copy to other application with list format.
So the copy result is 'blarblar'. How can i copy the text with list styles?I don't think the list style transfers. Copy and paste the text in to Mail, select it and then choose "Insert Numbered List" as a work around.
-
How can I copy and paste the art work from album covers?
How can I copy and paste the art work from album covers?
I don't think the list style transfers. Copy and paste the text in to Mail, select it and then choose "Insert Numbered List" as a work around.
-
I would like to know how to Copy and Paste the Motion Parameters (i.e. scale) settings from one clip to another.
Copy your clip, select the other clip, right-click (or control-click), choose "Paste Attributes", and check "Basic Motion".
-
How to copy and paste text from one photo book page to another.
hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts
Maybe you are looking for
-
How can I keep contact list separate on 2 phones on the same iTunes account
I have 2 iPhones and 2 iPads on the same ITunes account. How can I keep my contact list separate on each device?
-
My iphone4 shut off while charging and will not turn back on how do i fix this
i was charging my iphone when it shut off by itself i have tried turning it on, also have tried plugging it into a different charger and the phone will still not turn on
-
Formulas aren't calculating immediately
I have created my first form and everything seems to be working okay except for one of my formulas. I have essentially created a sales order and need it to calculate the subtotal, apply a user-supplied discount and then calculate tax and come up wit
-
Suggestion for trackpad "virtual button" area. PLEASE!
Thank you for fixing the "clicks not registering" issue. I have another problem that is quite frustrating, coming from a previous macbook pro. I am used to the two finger right click and often when I'm highlighting text I'm using one finger to move t
-
Hi, I have a collection of Big Shiny Tunes albums, and they recently released #10, and when I add it to the order, it slots it after Big Shiny Tunes 1 and before Big Shiny Tunes 2. Is there a way to fix this, or do I have to set it to Big Shiny Tunes