How to copy data from one planning area to other planning area

Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and  here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then,  i load the data from infocube  to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
Chandu

Hi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh

Similar Messages

  • How to pass Data from one form to the other

    Hi all
    Can any one suggest me how to pass data from one form to the other form, which i zoomed from the original one?
    I tried to do this by passing parameter in Event Procedure but i am getting error msg when i am opening the zoomed form.
    If any one of u have any idea, give me a reply
    Thank you
    Suhasini

    If you choose the second alternative you should erase these global variables after the second form is opened
    You can erase the global variable using:
    erase('global_var')
    Greetings,
    Sim

  • How to copy data from one column to other column

    hi,
    can any one tell me how to copy data of  one column to other column for some specific data
    example
    productno  ocalyear        actualsales  prevplansales   currentplansales
    p001       2007                  100              120                   
    p002       2007                   90               100
    p003       2007                  120              130
    p004       2007                  140              120
    p005       2007                  150              150
    i want to copy data of p001 and p002 from prevplansales to current plansales
    productno  ocalyear        actualsales  prevplansales   currentplansales
    p001       2007                  100              120              120     
    p002       2007                   90               100              100
    p003       2007                  120              130
    p004       2007                  140              120
    p005       2007                  150              150
    is it possible to do?
    please suggest me.
    i will assign points

    Hi,
    I think the needed techniques are already described in the documentation, e.g. in
    http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
    or
    http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
    The main techiques used in the above example to bind the filter of the planning function to selected (marked) objects in the analysis item or to drop down boxes (or both). These techniques are used in the above examples.
    Regards,
    Gregor

  • How to show data from one web site to other web site having diffrent domain.

    Dear all,
             i want to show the selected data from one web site to other web site.
    the location of the two web site is geographically seprated (and diffrent domain)
    Please tel me in how many ways it can be accomplished.
    If it can be done using jquery then please tel me the function or procedure to do it.
    Note: ( i have seen the above behavior in many web sites .
    like, i was purchasing some thing but finally declined,
    after that i visited some other web sites to gets some other data on other area
    , and i show my selected items of the first web site  on second website as advertisement.)
    i would like to know how these things are accomplished and how it can be done in asp.net.
    yours sincerely

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to copy data from one BB to another via Desktop Manager

    I've got two BBs (8900 and 9300), both actively in use and with different data (contacts, memos, etc.) on them.
    I need to copy my tasks, memos and contacts from 8900 to 9300. I tried "switch phones" option, but it substitutes data, while I need to syncronize it, so that data from 8900 is added to what is currently is on the 9300. 
    Is it possible to do it via Desktop Manager? It seems there was somewhere an option "copy data from another BB", but I can't find it in the latest Desktop Manager version.

    You would need to use Desktop Mangaer to sync BB1 with a local PIM program (such as Outlook or Lotus Notes) to get the information off BB1. Then use Desktop Manager to sync BB2 with the same PIM program. 

  • How to copy data from one transaction to the next (F-43)

    All,
    I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry.   Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?  
    Thanks
    Sandra

    I understand how it is supposed to work.  However, I have production examples of that not happening and I'm trying to figure out how.   The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen.   Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.  
    Regards
    Sandra

  • How to copy data from one table to another (in other database)

    Hi. I would like to copy all rows from one table to another (and not use BC4J). Tables can be in various databases. I have already 2 connections and I am able to browse source table using
    ResultSet rset = stmt.executeQuery("select ...");
    But I would not like to create special insert statement for every row . There will be problems with date formats etc and it will be slow. Can I use retrieved ResultSet somehow ? Maybe with method insertRow, but how, if ResultSet is based on select statement and want to insert into target table? Please point me in the right direction. Thanks.

    No tools please, it must be common solution. We suceeded in converting our BC4J aplication to PostgreSQL, the MSSQL will be next. So we want to write simple aplication, which could transfer data from our tables between these 3 servers.

  • How to copy data from one cube to other?

    Hi experts
    I have 2 system defined cubes..
    Now in 1st cube there is data till 2007  which is coming from 2LIS_04_P_MATNR.
    I want to copy this data in 2nd cube..
    Please suggest me.. how can I do it?
    Regards
    Swati

    swathi..
    create a export datasource option for exisintg the cube...
    Then replicate the same exported datasource which you craetd.
    Then do the trasnformation one to one from the exisitng cube(i mean which the datamart crated by u)
    Now load the infopackage from the old cube to new cube...
    we implemented the same in many of our data targets in the current project

  • How to copy data from one node to another or fromone table to another table

    Hi,
    I have a two tables.I am populating data in first table and on the click of first table ,selected row data should be copied to the second table.
    How do i achieve this requirement and what should be the cardinality of the second table
    Thanks
    Bala Duvvuri

    Hi,
    For this u have to fetch the selected row.
    For fetching the selected row go to the events of first table and select "OnLeadselect".
    Create a new method for this.
    Now in this method read the value of the selected row with method get_static_attributes.
    with this u will have the selected row in the element.
    not just bind this elemnt with the second table.
    Second node will also have the cardinality 0:n, because this is also binded with the table.
    Coding part for this is as below:
    method ONACTIONSELECT .
        DATA lo_nd_cn_mara TYPE REF TO if_wd_context_node.
        DATA lo_el_cn_mara TYPE REF TO if_wd_context_element.
        DATA ls_cn_mara TYPE wd_this->element_cn_mara.
        DATA ls_cn_mara1 TYPE wd_this->elements_cn_mara.
      navigate from <CONTEXT> to <CN_MARA> via lead selection
        lo_nd_cn_mara = wd_context->get_child_node( name = wd_this->wdctx_cn_mara ).
      @TODO handle not set lead selection
        IF lo_nd_cn_mara IS INITIAL.
        ENDIF.
      get element via lead selection
        lo_el_cn_mara = lo_nd_cn_mara->get_element(  ).
      @TODO handle not set lead selection
        IF lo_el_cn_mara IS INITIAL.
        ENDIF.
      alternative access  via index
      lo_el_cn_mara = lo_nd_cn_mara->get_element( index = 1 ).
      @TODO handle non existant child
      IF lo_el_cn_mara IS INITIAL.
      ENDIF.
      get all declared attributes
        lo_el_cn_mara->get_static_attributes(
          IMPORTING
            static_attributes = ls_cn_mara ).       " here u are getting the selected row of the table.
    APPEND ls_cn_mara to ls_cn_mara1.      " append the row in the table so that can be binded with the second node
      DATA lo_nd_cn_maraout TYPE REF TO if_wd_context_node.
      DATA lo_el_cn_maraout TYPE REF TO if_wd_context_element.
      DATA ls_cn_maraout TYPE wd_this->element_cn_maraout.
    navigate from <CONTEXT> to <CN_MARAOUT> via lead selection
      lo_nd_cn_maraout = wd_context->get_child_node( name = wd_this->wdctx_cn_maraout ).
    Bind the table with the second node
    lo_nd_cn_maraout->bind_table( ls_cn_mara1 ).
    endmethod.
    ->cn_mara  is the first node.
    ->cn_mara1  is the second node
    Thanks,
    Pankaj Aggarwal
    Edited by: Pankaj Aggarwal on Nov 19, 2008 7:40 AM

  • How  to copy data from one internal table to another

    i am using some function module to get some data for my function module
    and the retrieved data is not getting populated in mu fumctional module
    i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
    thanks in advance

    Hi Naval,
    Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
    Check the code for this function module.
    DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
    SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = 'C:\TEST.TXT'.      FILETYPE                = 'ASC'
          WRITE_FIELD_SEPARATOR   = 'X'
    <b>    TABLES
          DATA_TAB                = IT_MARA</b>
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks,
    Vinay

  • What are the diffrent ways to copy data from one application to another?

    Hi,
    Can you guys tell me what are the different ways to copy data from one application to another application??
    I know we can do it through script logic using DESTINATION_APP.
    Is there any other way to copy data from one application to another application?
    Please help me
    Thanks,
    Charly

    You can also call a custom DTSX package in SSIS via the datamanager.
    there are at least 5 ways of transfering data in BPC between apps.
    1. Through the front end (excel etc) via evdre/evsnds
    2. Through Script logic using *Dest App
    3. Using BPC's standard export dtsx package via DM
    4. Using SSIS using BPC's custom SSIS tasks
    5. Through Script logic using stored procs.
    i am sure people will come up with more.
    remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

  • Copy data from one Table to another Table

    How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
    Thanks...

    Question 1:
    I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
    1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
    2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
    3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
    Question 2:
    You have two options, but you may not have privileges for both.
    Option 1:
    DELETE FROM tableowner.tablename; COMMIT;
    Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
    Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
    Option 2:
    TRUNCATE TABLE tableowner.tablename;
    Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
    Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.

  • How do i copy stickies from one mac to the other

    how do i copy stickies from one mac to the other?
    or are they stored in a file i can just copy them over ? if so what is the file name path?
    thanks in advance

    yes, they are stored in the file /users/username/library/StickiesDatabase. just copy it over to the corresponding location on the new computer.

  • How  to transfer data from one system to another by datamart please give de

    how  to transfer data from one system to another by datamart please give details

    Hi Deba,
    Find the below SAP help doc which may help u...
    http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
    Also find the below threads...
    Loading data from one cube to another cube.
    data copy from infocube to infocube in two different BW systems
    Delta when loading from ODS to ODS
    reg datamart
    Data mart flag
    Regards,
    KK.

  • Copy data from one SAP system to another based on conversion rules

    Hi All,
    Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
    Conversion rule :
    vkrog in 110  vkorrg in 120
    1234            4567   
    <<text removed>>
    Thanks
    Edited by: Matt on Feb 16, 2009 4:35 PM

    Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Please note that offering points is against the rules.
    matt

Maybe you are looking for

  • Apple Mail Manual Migration 10.6 to 10.8

         I am currently making the switch from Snow Leopard to Mountain Lion.  I have always manually migrated all of my data because I feel its better to give the hard drive a chance for some spring cleaning and get rid of the junk that accumulates over

  • Use powrbook as AE to stream itunes?

    Hi. I have mac mini hooked up to home stereo. In another area of house, I have powerbook hooked up to other speakers. I'd like to listen to the same iTune/audiobook/CD in multiple rooms as I move from room to room. Essentially, I want to use the powe

  • How is GC cpu utilization % calculated?

    I am trying to find a way to capture the problem where a user process eats up a ton of cpu for over 30 minutes. I thought that I could possibly use the cpu utilization metric. In testing it, I reset the values to warning and critical thresholds to 0

  • NTLM domain not configured

    I need my Lion Server to share a folder out to about 30 PCs and Macs of various vintage and OSes. I'm having major trouble with failures to log in from windows despite SMB being enabled in the Server App's File Sharing Pane. The error that is ubiquit

  • Slideshow created in i-photo freezes in i-dvd.  Why?

    A slideshow created in I-Photo 09 runs fine in I-photo, but when dropped into the slideshow manager of I-dvd the slideshow freeses at the first photo.  Using OSX 10.6.8, Snow Lepord, on an I-mac with 2.66 GHz Intel Core 2 Duo.  Suggestions? Thanks,