How to correctly and automatically convert a pdf having tables with embedded figures to MS Word format?
I'm a language translator. My source files are very often pdf's containing huge tables with hundreds of embedded figures as well as text. So far, I've been unable to find a way to automatically convert such a structure to MS Word format. When selecting the table, the figures do not copy. Figures can be selected and copied only one at a time. Tried Reader, tried Acrobat, tried third party software like ABBYY PDF Transformer+ to no avail. Is there a way to do it?
Hi pielassss,
Could you share a sample file with me at [email protected] so that I can check at my end?
What version of Acrobat are you uisng?
Regards,
Rave
Similar Messages
-
Exporting to excel...automatically converts to PDF
I can't quite tell to be sure, whether this is a problem within BO or with the computer.
However the problem is basically what the subject says.
Someone I'm working with has been having this problem for the past two week, which previously was not a problem
Whenever we try to export something from BO to excel, the prompt still says save as .xls but with the PDF icon.
I haven't posted on here before so I don't know how to go about it, but I do have a screenshot I'd like to post.
Here's a link to the screenshot: http://tinypic.com/r/256z6sk/7
Anyhow, that is the only option he's getting and when he saves it opens up in excel, but then automatically converts to PDF and the excel is lost.
Again, I don't know if this a problem within BO or something going wrong with the computer he's using.
If anyone has heard of this happening, or have experienced something similar...any help would be greatly appreciated.
Thanks.
Edited by: dkoetter on Sep 2, 2010 4:35 PMYes.
Original Spreadsheet
When exported became this -
My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?
If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash. -
How can I convert a pdf file that's larger than 100MB to word
How can I convert a pdf file that's larger than 100MB to word?
I have just paid $20 to Adobe to get this facility but It won't work ,
as the pdf is larger than 100MB,
I actually believe that I have paid twice for adobe but I'll take this up with them,
in the meantilme,
do you have any suggestions, I really need this material in word urgently,
many thanks
ShannaIf your files are this large, ExportPDF is the wrong tool for you. You need Adobe Acrobat, which runs locally and does not need to send your files to Adobe.
-
How To Generate And Print Reports In PDF Format From EBS With The UTF8 Char
Hi,
I want to know How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set in R12.0.4.
RegardsRefer to Note: 239196.1 - PASTA 3.0 Release Information
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=239196.1
Or, you can use XML Publisher.
Note: 551591.1 - Need Latest XML Publisher / BI Publisher Patches For R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=551591.1 -
How can I correct and prevent white eyes when taking picture with my Iphone4S?
How can I correct and prevent white eyes when taking picture with IPhone 4S?
Hi Friend,
To correct red eyes on pictures, go to Photos app, tap the photo you want correct, tap Edit, Tap a red ball placed in the bottom of the screen, tap manually the red eyes, and Confirm.
Hope it will be helpful -
Convert a PDF that was originally a publisher doc into word will it look the same as my PDF
Can I convert a PDF that was originally a publisher doc into word doc will it look the same as my PDF?
pguerett wrote:
1. The highlighting of the fields that Acrobat does is affecting the visiblity of your underline. Turn off the highlighting.
Paul, isn't this setting part of acrobat itself and not something one can "set" in the document? Opening pdf forms on my computer does not show the fields to be highlighted.
Which version of Designer did you use to create the form?
It looks like the same version I had quoted above.
I originally created a form that was based off of an existing PDF image. I had just put the fields "on top of" the scanned image that the PDF contained. The result was too ugly for me, so I copy and pasted all my fields over onto a new empty static form and created what I posted above.
Looking at the original "ugly" form's XML it looks like the version of the software didn't change:
<?xfa generator="AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" APIVersion="2.8.9029.0"?>
Also, the "right" attribute exists in the original "ugle" PDF document that is dated 5/3/2009 if that helps any.
I followed your instructions and removed "right" and that fixed the problem. Looks like LiveCycle's XML parser needs an additional validation check! I had wondered what that "right" thing was since when I was looking through all the settings I didn't see a corrisponding setting. I had just assumed that it was some internal setting I wasn't supposed to care about. Good catch!
Thanks for your help Paul! -
I cannot convert a pdf to work with my newly purchased adobe acrobat pro XI
i cannot convert a pdf to work with my newly purchased adobe acrobat pro XI
Sorry I cannot convert pdf to Word document (typo)
Richard Gabai
Please note my new email address: [email protected]<mailto:[email protected]>
UnionPay International
208 Plaza 10, Harborside Financial Center, Jersey City, NJ 07311
Office (201) 577 5479 / Cell (917) 860 2642 / Fax (201) 577 5480 / UnionPayInt’l.com<http://140.207.194.112/column/en/en_ylsy/index.shtml>
cid:[email protected]
This e-mail contains information that may be confidential and/or proprietary. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient of this transmission, any disclosure, copying, use, or distribution of the information included in this e-mail and any attachments is prohibited. If you have received this transmission in error, please notify us by reply e-mail and permanently delete all. Thank you. -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
How to modify and save the data in the table control
how to modify and save the data in the table control
hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0.
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected] -
OTF to PDF - Getting blank PDF Internal table with CONVERT_OTF func module
All
i've captured OTF from smartforms and tried converting to PDF through 'CONVERT_OTF_2_PDF' FUNCTIOn module and after emailing to external email id, i found logo is completely disturbed (characters in logo got mixed up)..... later i tried converting with ''CONVERT_OTF' function module, but here i'm getting blank PDF internal table....
what am i missing in both ?
my intention is converting otf to pdf and emailing...though there are thousands of similar threads are available , none of them are related to my exact problem, which is logo is getting mixed up or disturbed.... any suggestions ?
Thanks in advanceHi,
You need to use the function module SX_OBJECT_CONVERT_OTF_PDF to create the PDF from OTF ..
Here is an example program
report ZPDFPRNT no standard page heading.
TABLES: TST05.
DATA: BEGIN OF ITAB OCCURS 0,
TLINE(255),
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
TLINE(255),
END OF ITAB2.
DATA: BEGIN OF ITAB3 OCCURS 0,
TLINE(255),
END OF ITAB3.
DATA: BEGIN OF OTF_TAB OCCURS 0,
TLINE(255),
END OF OTF_TAB.
DATA: LEN_OUT LIKE SOOD-OBJLEN.
DATA: LEN_IN LIKE SOOD-OBJLEN.
DATA: BEGIN OF DATA_SET OCCURS 200,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET.
DATA: BEGIN OF OTF_PAGE OCCURS 200.
INCLUDE STRUCTURE ITCOO.
DATA: END OF OTF_PAGE,
OTF_PAGES TYPE P,
OTF_MAX_PAGES TYPE P VALUE 10.
DATA: BEGIN OF OTF_CONTROL.
INCLUDE STRUCTURE ITCPP.
DATA: END OF OTF_CONTROL,
FORCE_RAW_OTF VALUE ' ',
L100_EXCLUDE(4) VALUE 'OTFJ',
BEGIN OF OTF_PAGE_INDEX OCCURS 20,
LINE_NUM TYPE P,
END OF OTF_PAGE_INDEX,
CUR_OTF_PAGE VALUE 1.
DATA: DATA_SET_LINECOUNT TYPE P,
DATA_SET_MAX_LINES TYPE P VALUE 100000,
DATA_SET_VALID TYPE C VALUE ' ',
DATA_SET_IS_OTF TYPE C VALUE ' ',
DATA_SET_LENGTH(5) TYPE C,
LINE_SPECIAL LIKE DATA_SET-DATA_LINE,
NEED_LINE_SPECIAL TYPE C,
DSN_TYPE(8) TYPE C.
DATA: FCODE(4) TYPE C,
DATE TYPE D,
TIME TYPE T,
RC(10) TYPE C,
ERRMSG(100) TYPE C,
PRINTJOB_CREATED(1) TYPE C,
PRINTJOB_CLEARED(1) TYPE C,
PRINTJOB_LIST(1) TYPE C,
DISPLAY_MODE(1) TYPE C,
LINE_MAX TYPE P VALUE '100000',
NEW_SCREEN_300(1) TYPE C,
MULTI_PRINT_300(1) TYPE C,
PRINT_ALL_300(1) TYPE C,
PRINT_COUNT_300 TYPE I,
SHOW_USER_100 TYPE C VALUE ' ',
ERROR_DISPLAY_LEVEL TYPE C VALUE '9',
NEXT_ERROR_DISPLAY_LEVEL TYPE C,
PREV_ERROR_DISPLAY_LEVEL TYPE C,
START_300(5) TYPE C, END_300(5) TYPE C,
SEP LIKE SY-VLINE,
DEFAULT_PRI,
TSP01_BUF LIKE TSP01,
TSP01_CURLINE LIKE SY-STARO,
TSP01_CURCOL LIKE SY-CUCOL,
TSP01_CURROW LIKE SY-CUROW.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET_LINE.
DATA: STATUS LIKE SY-SUBRC.
DATA: WGF_MESSAGE(80).
DATA: H_PATH(20) TYPE C.
DATA: H_MASK(20) TYPE C VALUE ',.pdf ,.pdf. '.
DATA: FILE_NAME(20).
DATA: FILENAME LIKE RLGRAP-FILENAME.
DATA: IMPORT(132).
PARAMETERS: IDENT(5) TYPE C.
PERFORM GET_OTF_TAB.
LOOP AT OTF_PAGE.
OTF_TAB-TLINE = OTF_PAGE.
APPEND OTF_TAB.
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'ASCIIPRI'
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = OTF_TAB
CONTENT_OUT = ITAB2
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
PERFORM GET_PATH USING 'PDF_FILE'.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'BIN'
BIN_FILESIZE = LEN_OUT
TABLES
DATA_TAB = ITAB2
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*& Form GET_OTF_TAB
FORM GET_OTF_TAB.
DATA: PART(4) VALUE '0001',
BEGIN OF MSG,
A(40),
B(40),
C(40),
END OF MSG.
REFRESH DATA_SET.
DATA_SET_LINECOUNT = 0.
DATA_SET_IS_OTF = ' '.
OTF_PAGES = 0.
REFRESH OTF_PAGE_INDEX.
CALL 'RSPOACSD'.
SELECT * FROM TST05 WHERE DTHREAD = 'X'.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD TST05-DTYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DSN_TYPE = TST05-DTYPE.
IF DSN_TYPE(3) = 'OTF'.
DATA_SET_IS_OTF = 'X'.
ENDIF.
ENDIF.
IF STATUS <> 24. EXIT. ENDIF.
ENDSELECT.
DATA_SET_VALID = 'X'.
DATA_SET_MAX_LINES = ( LINE_MAX * '1.1' ) + 100.
DO.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 36.
WHILE STATUS = 36.
CALL 'RSPOACSD'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ADD 1 TO PART.
IF DATA_SET_IS_OTF = ' '.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD DSN_TYPE
ID 'PART' FIELD PART
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ELSE.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'PART' FIELD PART
ID 'TYPE' FIELD DSN_TYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ENDIF.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDWHILE.
ENDIF.
IF STATUS <> 0 AND STATUS <> 40. EXIT. ENDIF.
DATA_SET = DATA_SET_LINE.
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
APPEND DATA_SET.
ADD 1 TO DATA_SET_LINECOUNT.
IF DATA_SET_IS_OTF = ' '.
IF DATA_SET_LINECOUNT >= DATA_SET_MAX_LINES.
CLEAR DATA_SET.
APPEND DATA_SET.
MOVE '----
' TO DATA_SET-DATA_LINE.
APPEND DATA_SET.
CLEAR DATA_SET.
APPEND DATA_SET.
WRITE: 'Abbruch nach'(029) TO MSG-A.
WRITE: DATA_SET_MAX_LINES TO MSG-B.
WRITE: 'Zeilen.'(030) TO MSG-C.
CONDENSE MSG.
DATA_SET-DATA_LINE = MSG.
APPEND DATA_SET.
EXIT.
ENDIF.
ELSE.
MOVE DATA_SET_LINE-DATA_LINE TO OTF_PAGE.
APPEND OTF_PAGE.
IF OTF_PAGE(2) = 'EP'.
ADD 1 TO OTF_PAGES.
IF OTF_PAGES >= OTF_MAX_PAGES.
MESSAGE S229(PO) WITH OTF_MAX_PAGES.
EXIT.
ENDIF.
ELSEIF OTF_PAGE(2) = 'OP'.
OTF_PAGE_INDEX-LINE_NUM = DATA_SET_LINECOUNT.
APPEND OTF_PAGE_INDEX.
ENDIF.
ENDIF.
ENDDO.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'RSPOACSD'.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
CALL 'RSPOACSD'.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
ENDFORM. " GET_OTF_TAB
*& Form GET_PATH
FORM GET_PATH USING P_FILENAME.
CLEAR: H_PATH, FILE_NAME.
FILE_NAME = P_FILENAME.
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'CD' "// Current Directory
IMPORTING
RETURN = H_PATH.
CONCATENATE FILE_NAME '.pdf' INTO FILE_NAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FILE_NAME
DEF_PATH = H_PATH
MASK = H_MASK
MODE = 'O'
IMPORTING
FILENAME = FILENAME"dbname
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " GET_PATH
Regards
Sudheer -
How can I implement the equivilent of a temporary table with "on commit delete rows"?
hi,
I have triggers on several tables. During a transaction, I need to gather information from all of them, and once one of the triggers has all the information, it creates some data. I Can't rely on the order of the triggers.
In Oracle and DB2, I'm using temporary tables with "ON COMMIT DELETE ROWS" to gather the information - They fit perfectly to the situation since I don't want any information to be passed between different transactions.
In SQL Server, there are local temporary tables and global. Local temp tables don't work for me since apparently they get deleted at the end of the trigger. Global tables keep the data between transactions.
I could use global tables and add some field that identifies the transaction, and in each access to these tables join by this field, but didn't find how to get some unique identifier for the transaction. @@SPID is the session, and sys.dm_tran_current_transaction
is not accessible by the user I'm supposed to work with.
Also with global tables, I can't just wipe data when "operation is done" since at the triggers level I cannot identify when the operation was done, transaction was committed and no other triggers are expected to fire.
Any idea which construct I could use to acheive the above - passing information between different triggers in the same transaction, while keeping the data visible to the current transaction?
(I saw similar questions but didn't see an adequate answer, sorry if posting something that was already asked).
Thanks!This is the scenario: If changes (CRUD) happen to both TableA and TableB, then log some info to TableC. Logic looks something like this:
Create Trigger TableA_C After Insert on TableA {
If info in temp tables available from TableB
Write info to TableC
else
Write to temp tables info from TableA
Create Trigger TableB_C After Insert on TableB {
If info in temp tables available from TableA
Write info to TableC
else
Write to temp tables info from TableB
So each trigger needs info from the other table, and once everything is available, info to TableC is written. Info is only from the current transaction.
Order of the triggers is not defined. Also there's no gurantee that both triggers would fire - changes can happen only to TableA / B and in that case I don't want to write anything to TableC.
The part that gets and sets info to temp table is implemented as temp tables with "on commit delete rows" in DB2 / Oracle.
What do you think? As I've mentioned, I could use global temp tables with a field that would identify the transaction, but didn't find something like that in SQL Server. And, the lifespan of local temp tables is too short. -
Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars...
Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars - I keep all the details of my work schedule on Calendars but since updating everything I am notified at 9 a.m. before each of my days off. Can someone please tell me how I can stop this? Also, how can I change that time (9a.m.) if I do want to be notified about something?
Thanks.troubleshooting message http://support.apple.com/kb/ts2755
Do you have MMS turn on in Settings?
Are you provisioned by your carrier to use MMS?
Lastly, give your phone carrier a call, as MMS is a carrier feature. -
The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How I can change visible property of an af:table with an af:selectOneRadio?
How I can change visible property of an af:table with an af:selectOneRadio? Anyone can help me with a tutorial, example or link?
Thanks in advance.After you add the required libraries to your classpath
you can do your use case as explained in this sample
page source
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="untitled2.jsf" id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:selectOneRadio label="radio" id="sor1" autoSubmit="true"
valueChangeListener="#{ControlVisibilty.onRadioSelected}">
<af:selectItem label="0" value="0" id="si1"/>
<af:selectItem label="1" value="1" id="si2"/>
</af:selectOneRadio>
<af:table value="#{bindings.DepartmentsView1.collectionModel}" var="row"
rows="#{bindings.DepartmentsView1.rangeSize}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.DepartmentsView1.rangeSize}" rowBandingInterval="0"
selectedRowKeys="#{bindings.DepartmentsView1.collectionModel.selectedRow}"
selectionListener="#{bindings.DepartmentsView1.collectionModel.makeCurrent}" rowSelection="single"
id="t1" partialTriggers="::sor1" visible="#{ControlVisibilty.table}">
<af:column sortProperty="#{bindings.DepartmentsView1.hints.DepartmentId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.DepartmentId.label}" id="c1">
<af:inputText value="#{row.bindings.DepartmentId.inputValue}"
label="#{bindings.DepartmentsView1.hints.DepartmentId.label}"
required="#{bindings.DepartmentsView1.hints.DepartmentId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.DepartmentId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.DepartmentId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.DepartmentId.tooltip}" id="it1">
<f:validator binding="#{row.bindings.DepartmentId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.DepartmentId.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.DepartmentName.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.DepartmentName.label}" id="c2">
<af:inputText value="#{row.bindings.DepartmentName.inputValue}"
label="#{bindings.DepartmentsView1.hints.DepartmentName.label}"
required="#{bindings.DepartmentsView1.hints.DepartmentName.mandatory}"
columns="#{bindings.DepartmentsView1.hints.DepartmentName.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.DepartmentName.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.DepartmentName.tooltip}" id="it2">
<f:validator binding="#{row.bindings.DepartmentName.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.ManagerId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.ManagerId.label}" id="c3">
<af:inputText value="#{row.bindings.ManagerId.inputValue}"
label="#{bindings.DepartmentsView1.hints.ManagerId.label}"
required="#{bindings.DepartmentsView1.hints.ManagerId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.ManagerId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.ManagerId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.ManagerId.tooltip}" id="it3">
<f:validator binding="#{row.bindings.ManagerId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.ManagerId.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.LocationId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.LocationId.label}" id="c4">
<af:inputText value="#{row.bindings.LocationId.inputValue}"
label="#{bindings.DepartmentsView1.hints.LocationId.label}"
required="#{bindings.DepartmentsView1.hints.LocationId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.LocationId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.LocationId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.LocationId.tooltip}" id="it4">
<f:validator binding="#{row.bindings.LocationId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.LocationId.format}"/>
</af:inputText>
</af:column>
</af:table>
</af:form>
</af:document>
</f:view>The managed bean code is
import javax.faces.event.ValueChangeEvent;
public class ControlVisibilty {
private boolean table;
public ControlVisibilty() {
setTable(false);
public void onRadioSelected(ValueChangeEvent valueChangeEvent) {
// Add event code here...
if(valueChangeEvent.getNewValue().toString().equals("1"))
setTable(true);
else
setTable(false);
public void setTable(boolean table) {
this.table = table;
public boolean isTable() {
return table;
}
Maybe you are looking for
-
LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING
My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc. some times the number 2 keys works automatically any time while working on WORD file or on run command. whts the problem,, plz ad
-
I deactivated CS6 and uninstalled on my PC, so I could install CS6 on a Mac. I downloaded CS6 on my Mac, but when I try to put my serial number in it's telling me the number is invalid. What should I do next?
-
Why are my Indesign files not showing up in Bridge
I downloaded CC 2014 at the same time as transferring my files to a new computer. Now on Bridge, the only files showing up are jpgs and pdfs. Any idea how to integrate the indesign and photoshop into Bridge?
-
I live in state collage and my iphone 5 is broken. I would like to send it to repair so how can I get a RMA number?
-
Table Styles - Automatic Format Header (only)
Hi, I'm trying to set up a Table Style to look like the following Header A Header B Header C Example 1 XX XX XX Example 2 XX XX XX Example 3 XX XX XX I have the following Paragraph Styles set up: Header - (Header A, B, C) centre aligned. Bold Arial 1