How to correctly set detection rules for date modified

How are application detection rules for modified or created date calculated. For example if I want the detection rule to use a file that was modified today or any day after today do I set it as Greater than or equal to or less then or equal to in
the Detection rule?

You would use Greater than Or Equal To. Greater than or equal to means that time or anything after. The latter would be that time or before
Dustin Estes - MCP | www.dustinestes.com

Similar Messages

How to set Legislation rule for Enhanced Retro

how to set Legislation rule for Enhanced Retro
How can i setup Enhanced Retro for Global HR International.
Iam implementing HR/Payroll on latest 12i. I am using HR International.
when i execute the following query , there is no records
select * from pay_legislation_rules
where rule_type like '%ADVANCED%RETRO%'
and legislation_code = 'IQ'
I have created events, event groups, enable dynamic triggers for my business group and legislation(IQ) and enter the corresponding event group and retro element in the Element screen(retro component).
And i update one allowance in the back period , and I found one row has been inserted in pay_process_events table. But i am not able to run enhanced Retro Notification report and not able to find any Enhanced Retro concurrent request.
Any one have any idea?
thanks,

There are no specific concurrent programs for Enhanced/Advanced retropay. The old ones still do, and derive under the hood the method of retropay.
I do not recall by hard the setting to activate enhanced retro (but it is a legislation rule), but it should show already in the element type screen. If you have the retro tab in the screen, and first you have to specify the method (Adjustment, ...) before specifying the retro element type (and time span), then you know that enhanced retro is configured correctly.

How to set up rules for emails to go to junk on iphone 4

i have an iphone4 that i use for work and a coworker sent out over 40,000 emails which has now overloaded my email to where i cannot send or recieve emails can i set up rules for his emails to go straight to junk? and how my email address is linked to iphone4s and ipad as well.
ps i did set up the rules on my desktop but it didnt seem to work or flow over to the iphone or ipad or maybe i just need to delete the emails? however theres literally 30,000 of them who do i do that quickly? please

The Mail app on the iPhone doesn't support filters. You'd need to do that on the server side (not desktop). There is just no quick way to delete 30,000 emails. At this point, I would remove the email account from your phone, delete the offending emails from your account, then add the account back to the iPhone.
I would also report the co-worker to your IT department (if they haven't already noticed) for sending that many emails. I'm surprised that it didn't cause issues.
Best of luck.

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

HI,How can i set delta option for costumised Generic data source

Hi Sir/Madam,
How can i set delta option for costumised Generic data source.
Regards,
Vishali.R
Please search the forum before posting a thread
Edited by: Pravender on Aug 15, 2011 1:26 PM

Hi,
Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
Regards,
Durgesh.

After purchasing verizonwireless for the ipad2,how do I set up the cellar data? Do I just turn it on?

After purchasing a wireless account,how do I set up a cellar data connection? Do I just turn the cellar data on?

That should be all that is required.

How to debug a transfer rule during data load?

I am conducting a flat file (excel sheet saved as a CSV file) data load. The flat file contains a date field and the value is '12/18/1988'. In transfer rule for this field, I use a function call to transfer this value to '19881218' which corresponds to BW DATS format, but the monitor of the InfoPackage shows red error:
"Value '1981218' of characteristic 0DATE is not a number with 000008 spaces".
Somehow, the last digit or character of the year 1988 was cut and the year grabbed is 198 other than 1988. The function code is (see below in between two * lines):
FUNCTION ZDM_CONVERT_DATE.
""Local Interface:
*" IMPORTING
*"     REFERENCE(CHARDATE) TYPE STRING
*" EXPORTING
*"     REFERENCE(DATE) TYPE D
DATA:
c_date(2) TYPE c,
c_month(2) TYPE c,
c_year(4) TYPE c,
c_date_combined(8) TYPE c.
data: text(10).
text = chardate.
search text for '/'.
if sy-fdpos = 1.
concatenate '0' text into text.
endif.
c_month = text(2).
c_date = text+3(2).
c_year = text+6(4).
CONCATENATE c_year c_month c_date INTO c_date_combined.
date = c_date_combined.
ENDFUNCTION.
Could experts here tell me what's wrong and also tell me on how to debug a transfer rule during data load?
Thanks

hey Bhanu/AHP,
I find the reason. Originally, I set the character length for the date InfoObject ZCHARDAT1 to 9, then I find the date field value (12/18/1988)length is 10. Then I modified the InfoObject ZCHARDAT1 length from 9 to 10 and activated it already. But when defining the transfer rule for this field, before the code screen, click the radio button "Selected Fields" and pick the filed /BIC/ZCHARDAT1, then continue to go to the transfer rule code screen, but find the declaration lines for the infoObject /BIC/ZCHARDAT1 is as following:
InfoObject ZCHARDAT1: CHAR - 000009
    /BIC/ZCHARDAT1(000009) TYPE C,
That means even if I've modified the length to 10 for the InfoObject and activated it, but somehow the transfer rule code screen always takes the old length 9. Any idea to have it fixed to take the length 10 in the transfer rule code screen defination?
Thanks

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

Rules for Date Determination in Sales Contracts

Hi everyone,
I have a need for an "enhanced" rule for date determination to be used in a contract profile for a sales contract.
In our current system (SAP ECC 6.0) only the following rules are possible to choose:
01 Today's date
02 Contract start date
04 Acceptance date
05 Installation date
06 Date contract signed
07 Billing date/Invoice date
08 CntrctStDate+contract duration
09 Contract end date
In supplement to these I would like to create
ZZ CntrctStDate+to year end
This rule should set the end date in the contract according to the following logic.
If the Contract start date is between YYYY-01-01 and YYYY-05-31 the Contract end date should be calculated to YYYY-12-31 in the current year. Else (if Contract start date is between YYYY-06-01 and YYYY-12-31) the Contract end date should be calculated to YYYY-12-31 in the following year.
I have searched the IMG and Development Workbench but I canu2019t find any place where it is possible to create own rules like the ones above (that is defined by SAP). Does anyone have a tip on how to proceed?
Best Regards
Patrik Bergströ

Hi everyone,
I have a need for an "enhanced" rule for date determination to be used in a contract profile for a sales contract.
In our current system (SAP ECC 6.0) only the following rules are possible to choose:
01 Today's date
02 Contract start date
04 Acceptance date
05 Installation date
06 Date contract signed
07 Billing date/Invoice date
08 CntrctStDate+contract duration
09 Contract end date
In supplement to these I would like to create
ZZ CntrctStDate+to year end
This rule should set the end date in the contract according to the following logic.
If the Contract start date is between YYYY-01-01 and YYYY-05-31 the Contract end date should be calculated to YYYY-12-31 in the current year. Else (if Contract start date is between YYYY-06-01 and YYYY-12-31) the Contract end date should be calculated to YYYY-12-31 in the following year.
I have searched the IMG and Development Workbench but I canu2019t find any place where it is possible to create own rules like the ones above (that is defined by SAP). Does anyone have a tip on how to proceed?
Best Regards
Patrik Bergströ

How do I set a custom time & date format in the top bar?

Hello guys,
Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
How do I set a custom time & date format in the top bar?
When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
All help appreciated!
Greetings

Language & Text system preferences, Formats tab, customize dates.
There are also many third party menu item utilities that can. Search Macupdate.com for some.
One search yielded iClock Pro. Although I never used it I would think it allows customization. The link I gave you is to the Macupdate download page for that app. On that same page is a Similar Software section which has other apps that can do the same thing.
One listed is iStat Menus. The primary use for iStat Menus is not for displaying date/time but it does do that. And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date. So I use it instead of the apple clock. It does have the customization features I think you are looking for.

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

HT4970 How do you set a reminder for only you when you are also sharing?

How do you set a reminder for only you when you are also sharing? I want to share the grocery list with my wife but she don't want to be reminded for me taking my medicine.

Hey Gin-from-SC!
Here is an article that can show you how to set a time and date alert for your reminders when you create them:
iCloud: Create, edit, and delete reminders
http://support.apple.com/kb/PH12088
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

How to correctly set puppet attributes with AppD?

Hello,
I'm trying to add a value to a puppet attribute within AppD. The value is an array and should look something like this ['ntp1.testlab.local'] for puppet to work. The problem is after AppD processes it, it ends up looking like this '["ntp1.testlab.local"]' in the node's manifest, which doesn't work. I've tried several variations with no joy. Can anyone please show me how to correctly set puppet variables within AppD?
From the node manifest created by AppD:
[root@ar-syslog-tlab-01 appd_nodes]# grep "Puppet_ntp_v3_1_2_servers =" /etc/puppetlabs/puppet/manifests/appd_nodes/CentOS-LON4FRQT.pp
$Puppet_ntp_v3_1_2_servers = '["ntp1.testab.local"]'
From stdout and stderr log available on VM at /tmp/25/CG_Puppet_ntp_v3.1.2_AI-REMEDIATE_NODE/task.stdlog.
- !ruby/object:Puppet::Util::Log
      level: !ruby/sym err
      tags:
        - err
      message: "Could not retrieve catalog from remote server: Error 400 on SERVER: Could not parse for environment production: Syntax error at '['; expected ']' at /etc/puppetlabs/puppet/manifests/appd_nodes/CentOS-IEU4RJWH.pp:17 on node centos-lon4frqt"
      source: Puppet
If I edit the node's manifest to read
       $Puppet_ntp_v3_1_2_servers = [ 'ntp1.testab.local' ]
it works fine.
Any tips would be greatly appreciated.
Thanks.

If it is a bug, you maybe have a workaround by adding a script task in the execution plan the Blueprint as the first task to edit /etc/puppetlabs/puppet/manifests/appd_nodes/CentOS-LON4FRQT.pp to modify the value of $Puppet_ntp_v3_1_2_servers, and then the rest tasks will get the correct value format for $Puppet_ntp_v3_1_2_servers.

How Can i SEt Dynamic Variant For WEEK on SELECTION Screen.pls help me..

<b>Hi ALL..
Pls Help Me for this Problem..i am very confused how can i do that...plese tell me proper process..
i want set Dynamice Varient for WEEK on Selection screen..
I have ALrady SET Dynamice Varient for DATE on Selection Screen.ther isd option is D...but in case of WEEK there is a no option...
Plese help me..
thaks in advance..
pls help me..</b>

Hello,
Define your select-option in TVARV (assume Z_THISWEEK). And use a program like:
DATA:
zlv_week TYPE KWEEK.
call function 'DATE_GET_WEEK'
   exporting date = syst-datum
   importing week = zlv_week.
SELECT SINGLE *
      FROM tvarvc
     WHERE name = 'Z_THISWEEK'
       AND type = 'S'
       AND numb = '0000'.
tvarvc-low = zlv_week.
IF syst-subrc <> 0.
    tvarvc-name     = 'Z_THISWEEK'.
    tvarvc-type     = 'S'.
    tvarvc-opti     = 'EQ'.
    tvarvc-sign     = 'I'.
    tvarvc-numb     = '0000'.
    insert tvarvc.
ELSE.
update tvarc.
ENDIF.
Regards,
John.

How can i set the orientation for a photo book (horizontal or vertical)

how can i set the orientation for a photo book (horizontal or vertical)
I like a photo book vertical format and i cant findet!!

That was quick! Although my earlier search turned up nothing, when I posted my question the system immediately gave me a list of previous questions among which I found the following answer:
This solved my question by LarryHN on Aug 18, 2010 6:01 PM
select the photos and change the date/time - photo menu ==> adjust time and date to make a relative adjustment to a number of photos ==> batch change ==> time and date to set an absolute time date for them
LN

How to correctly set detection rules for date modified

Similar Messages

Maybe you are looking for