How to create a Blanket Release in iProc from a approved requistion

Hi Gurus,
How to create a blanket Release in iProcurement from a approved requisition. I have followed the below steps.
1. Created a BPA from Front end.
2. Run Loader Data program.
3. Above program reflected the BPA in iProc.
4. Created requisition from BPA.
5. Requisition has been approved.
After this i am stuck. How to proceed ahead. I want to create a Blanket Release from approved PR and then receive in iProcurement.
please help me on this. We are using 11.5.10.2
Regards,
john

911765 wrote:
Hi Mahendra,
Thank you so much for your reply.
So you mean to say that it all depends upon the Sourcing Rule and ASL based upon that system would automatically create a Blanket Release or If its Automatic Release/Review then we have to manually create release through autocreate.
The reason why i am asking this query is now when i tested it, system is automatically creating release and starngely there is no Sourcing Rule and ASL has been defined.
But we are looking for a Manual Release through autocreate window.
It would be great if you could please suggest.
Regards,
JohnJohn,
When you say system is automatically creating release..as far as i know...it should be referencing a PO..correct...in the releases window..
can you pull that up..and see if you can get any clue..bcz that PO would BPA...
Also I am not that much into Iproc...I don't know...whether Iproc has some other setups
HTH
Mahendra

Similar Messages

How to create pdf files in UNIX directory from oracle reports

I would like to know how to create pdf files in UNIX directory from oracle reports.
Thanks,

Please make your question more clear . Also mention the reports version.
1) If you are runnning reports in Unix, you can give
.... destype=file desformat=pdf desname=<filename>
in command line
Please refer docs below.
2) If by your question you mean
"My reports server is running in Windows but I want to ftp my files to Unix after creating it"
then the answer is that you can use pluggable destination "ftp"
.... destype=ftp desformat=pdf desname=<ftp url>
Pluggable destinations download
http://otn.oracle.com/products/reports/pluginxchange/index.html
Thanks
Ratheesh
[ All Docs ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

How to create a service entry sheet based from the PO

how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!

HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran

How to create a database for sample code from Tutorial/Book?

I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
I'm feeling overwhelmed with these links describing how to create a database:
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
[http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
(1) What is the command to list the existing databases?
(2) What is the command to delete an existing database?
(3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
(4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
(5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
(6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
Thanks
Siegfried
Edited by: user8816970 on Sep 26, 2012 12:01 PM
Edited by: user8816970 on Sep 26, 2012 12:18 PM

user8816970 wrote:
Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
Thanks!
Siegfried
>Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
above does NOT use SQL*Net to connect to the instance
>
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
>
Thanks!
Siegfrieda database in SQL Server is same as schema/user in Oracle

How to create a new view by copying from standard view in IC webclient?

Hello, expert,
I need to enhance a sap standard component (BP_Factsheet), inside it I need to create a new view by copying from an existing standard view (Acitivities). However when I try to make a copy, I was asked for destination BSP application, I entered the Z-Application which I used when defining enhancement for the component. After the copy, I don't see the new view.
Then I tried the destination BP_factsheet, instead of the z-application, then after the copy, I can see the new view. However since it's in SAP application, it seems like it's a MOD, not enhancemnet, and inside the new view, the classes (for context, context nodes, etc.) are not in custom namespace (not starting with Z).
So please let me know how can I make a copy of sap standar view in custom namespace.
Thanks in advance.
Jayson

When copying you can put any BSP name..normally the practice is to prefix the standard name with a Z.
Secondly when you want to make changes to the individual classes and methods you need to right click and say enhance. Then the AZ class names etc would be generated. The view should appear in the component wherein you copied the original view from.
I hope this helps.
The cookbook should have details on this. Otherwise also its quite intuitive.
Award points if it helps.
Thanks.

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

How to create a .mdf SQL Server database from a Data-Tier Application file that has data?

This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013   2.0.40926.0
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools

Thanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create a table in MS Access from Labview using ActiveX?

I want to transfer datas from Labview to Access using activeX method. My only problem is to find out how to create a new table (array) in Access from the Labview program.
Remarks: I use Labview 6i and MS Access 2000.
For the moment I can write and read datas of Access from Labview.
If someone could help me... that would be grate!

This is off the Microsoft MSDN site "creating an external table". I think you can drop the last step.:
Open the database you want to create the table in. If it is the current database, use the CurrentDb function to return an object variable that represents the current database. If it isn�t the current database, use the OpenDatabase method to open the database you want.
Use the CurrentDb function to create a Database object that points to the current database.
Use the CreateTableDef method of the Database object to create a table definition for the Microsoft Access table.
Use the CreateField method of the TableDef object to create one or more fields in the Microsoft Access table.
Use the Append method of the Fields collection to add the new field or fields t
o the Microsoft Access table.
Use the Append method of the TableDefs collection to create the Microsoft Access table.
Use the TransferDatabase method to create the external table in the specified folder.
Use the Delete method of the TableDefs collection to delete the Microsoft Access table definition.

How to create a smallest file size pdf from indesign CS4 document

How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
Thank you

One trick is to
Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
This is enough to force the graphics throught the Transparency Flattener
Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
Next
Use File>Export and choose
Smallest file size
PDF Compatibility Acrobat 4 (PDF 1.3)
In Advanced Section - go to transparency and selec the new Flattener Preset you created.
*this will convert your vectors to raster, but it should reduce your file size

How to create a bootable OEL5.8 .iso from scratch?

Are there any instructions available about how to create a bootable .iso file, for installing OEL5.8, from scratch?
We need to build a system which is a customised version of OEL5.8; we want to add some extra RPMs and remove others. We have an older build system which does this based on OEL5.5, but the way it has been built makes this hard to upgrade. We'd like to try starting from OEL5.8 again.
One possibility would be to download the initial OEL5.8 .iso; mount this as a loop-back filesystem; adjust some RPMs and config; then re-create an .iso from this file. However, this doesn't allow us to update the kernel very easily. We'd prefer an approach which starts from a set of RPMs (perhaps including modified kernel RPMs) and builds the .iso from scratch.
Many thanks for any pointers.
Edited by: user11244224 on Mar 5, 2013 7:16 AM

You cannot simply edit an .iso image file because the iso9660 filesystem is read-only. And even if you create your own iso image from scratch, with a bootable code, any package you add will not be part of the initial installation, unless you recreate the appropriate software repository database and anaconda installer. Sounds like overkill to me for what you are describing.
Why would you want to go through the endeavor to adjust the Oracle Linux distribution DVD for the purpose of creating a customized system? Why not using Kickstart instead, or a simply create a post-installation script to modify the installation to your needs?

How to Create WebService (the Server, not Client) from existing WSDL

Does anyone have any suggestions on how to create a WebService from existing WSDL. I have been asked to implement a WebService (the Server) based on WSDL from a standards based consortium. I have created several WebServices in the past and the generated WSDL under my control. Does Axis WebServices generate WebService service stub Java code?

Hai
you can create stubs for AXis webservices also
for help use the following link
http://www.onjava.com/pub/a/onjava/2002/06/05/axis.html?page1

How to create single user and bulk users from back end in ebs r12?

Hi all,
how to create users from back end in oracle application R with responsibilities?
Thanks in Advance,
Sandeep
Edited by: user2584435 on 17 Nov, 2009 11:14 PM
Edited by: user2584435 on 17 Nov, 2009 11:14 PM

Hi,
I have created user san1 with below mention pkg and added sysadmin with below mention pkg.
BEGIN fnd_user_pkg.CreateUser(x_user_name =>'san',
x_owner =>'CUST',x_unencrypted_password => null,
x_description => 'new_desc2',x_email_address => '',x_fax => '');
end;
DECLARE
v_user_name VARCHAR2(30) := upper('&Enter_User_Name');
BEGIN
fnd_user_pkg.addresp(username => v_user_name
,resp_app => 'SYSADMIN'
,resp_key => 'SYSTEM_ADMINISTRATOR'
,security_group => 'STANDARD'
,description => 'Auto Assignment'
,start_date => SYSDATE - 10
,end_date => SYSDATE + 1000);
END;
Q. I am able to login but dont having any responisibility,why?
Regards
Sandeep.

Hi. how to create Subroutine Pool and call it from sapscript

HI,
Can anyone tell is there any standard subroutine pool available which could fetch the customer number.
how to create an subroutine pool and call it from the sapscript..
please help me
Advance Thanks..
Guhapriyan.

Hi Guhapriyan,
1. Create a FORM in your program.
2. call it from sapscript using
/:   PERFORM GET_COMPANY_INFO IN PROGRAM YHRR_OFFER_CONTRACT_FORM
/:   USING &P0001-BUKRS&
/:   CHANGING &COMP_NAME&
/:   ENDPERFORM
3. The form in your program should be of the following parameters only.
form GET_COMPANY_INFO tables IN_PAR structure ITCSY
                        OUT_PAR structure ITCSY.
(important is IN_PAR, OUT_PAR -
where in your read the values passed,
and pass back the values
thru internal table using varname, varvalue)
regards,
amit m.

How to create an SPList by adding SPListItems from List SPListItem ?

Hi there,
I have List<SPListItem> as below that contains many SPListItems.
List<SPListItem> Output = new List<SPListItem>();
How to create an SPList or SPLIstItemCollection from above please?
Thank you so much.

Hi Frob,
Thanks for posting this issue, Kindly find the below mentioned steps. I hope you should be able to create a new collection.
Get a instance of the list you want to add the item to.
Add a new item to the list:
SPListItem newItem = list.AddItem();
To bind you new item to a content type you have to set the content type id for the new item:
newItem["ContentTypeId"] = <Id of the content type>;
Set the fields specified within your content type.
Commit your changes:
newItem.Update();
I hope this is helpful to you. If this works, Please mark it as
Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to create new instance of the process from external web apps?

Hi Everyone,
How to create a new instance of the process which deploy to the weblogic server from the external web app?
Thank you.

Assuming the process includes a message start event, the simplest way is to use Web Service call. Once you've deployed the process you can use Enterprise Manager to get the URL of the WSDL. There's and icon at the top of the composite summary page for getting the WSDL, or you can get it from the test page. Use that WSDL URL to construct the client to use from the web app. If it's an ADF client you can generate either an ADF Data Control or a client proxy.

How to create a Blanket Release in iProc from a approved requistion

Similar Messages

Maybe you are looking for