How to create a cluster on existing table
how to create a cluster on existing table
user8949393 wrote:
how to create a cluster on existing tableAFAIK you can't. You have to create the cluster from scratch, something like
--cluster key can be just one column also
CREATE CLUSTER s_emp_dept_ic (deptno NUMBER(7), dname varchar2(30));
CREATE TABLE emp(
DEPTNO NUMBER(7),
DNAME VARCHAR2(30),
EMPNO NUMBER(4),
ENAME VARCHAR2(30)
--cluster clause puts table in cluster. Deptno, dname are table columns in
--cluster key
CLUSTER s_emp_dept_ic (deptno,dname);
--a cluster index must be created before any data is inserted
--the index columns used come from the cluster key from CREATE CLUSTER
CREATE INDEX s_emp_idx ON CLUSTER s_emp_dept_ic;
Similar Messages
-
How to create a partition on existing table?
Hey
Could some one please tell me on how to create a partition on existing table?Could some one please tell me on how to create a partition on existing table?
You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
The choice will depend on how much data the existing table has and whether you can do it offline. -
How to create a partiotion for existing table
Hi,
There ia one table in database with data. I want to create a partion for this table. data loss of data is not an issue.
Please provide the query for this.
Regards,
VenkiAn existing non-partitioned table cannot be partitioned. You will have to create a new, partitioned table and move the data (if you care to keep it) from the old table to the new table, potentially followed by dropping the old table and renaming the new table to use the old table name.
If you do not have a downtime window to accomplish this, you can use DBMS_REDEFINITION to assist. That, however, is just adding a bit of extra complexity on top of the basic procedure in order to support users accessing the table while you're building the new table. Unless your downtime window is insufficient to accomplish the move manually, I wouldn't bother with DBMS_REDEFINITION.
Justin -
How to add create partition to an existing table?
hi,
please tell me how to add partition to an existing table.
i have tried
alter table mvr add partition sno
but getting error : ORA-14501: object is not partitioned
thanks.Just Googling for ora-14501 resulted in the following
Adding a partition results in ORA-14501: object is not partitioned
It is really sad you can not do this on your own, and always need someone to do this for you.
Sybrand Bakker
Senior Oracle DBA -
How to create an arrow in a table
How to create an arrow in a table in numbers.
If you have plus or minus numbers, I want to know a green arrow on the increase is positively or a red arrow if it is negative numberMaybe something like this?
-
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to find the list of existing tables in a schema using DB link?
Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link? -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to create dependent LOV in Advanced Table.
Hi,
How to create dependent LOV in Advanced Table. Pls help send me the steps.
Thanks in Advance,
Hanimi....Hi,
Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
and for Dependent Poplist refer the below link:
http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
Regards,
Sudhakar Mani
http://oraclearea51.com/sudhakarmani -
Can we create partitions in an existing table?
Hi,
Can we create partitions in an existing table which has about a million rows? I am using oracle 9i database.
Can any one suggest me on this please.07b3ea8e-c4c5-4559-9055-ed38853dc64e wrote:
Hi,
Can we create partitions in an existing table which has about a million rows? I am using oracle 9i database.
Can any one suggest me on this please.
can NOT be done.
research DBMS_REDEFINITION -
How to create IDOC for customer defined table
hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved. -
HI All ,
I have to create an OSB cluster across different machines .
Can I get a detailed steps of how to create a cluster across machines using node manager .
I am using osb 11gR2 .Please let me know the exact steps .You can bundle two or more wires together using the 'bundle function' - the output is a cluster. This is the top example.
The other way is drop the constand cluster and drag any constants (like the numeric and string) into the cluster. This is the lower example in the VI snippet. You can also do this on the frontpanel - drop the cluster constant on the frontpanel and drag any controls or indicators into it. They have to be controls or indicators - you can't have a mix of both.
Also in case you are not familiar with the concept if you are working with big clusters you should 'type def' them. In LV2011 you do this by right-clicking on the block diagram and clicking 'make type def'. What this does is creates a separate file where the new cluster (or any other type of control) is saved. Then if you change the cluster - say add a boolean alogn with the numeric and string - the change happens and is propogated through your program. This stops you getting broken wires when you have two clusters wired together, you change one and not the other.
Regards,
Dave -
How was created the cluster with keys in example: Sim Phone.vi
Hello all
I have LV 7.1.1
I have found the example: Sim Phone.vi
And I don't know how was created the cluster with keys?
Best regards
IskanderIt's just like any other cluster you create. Put a cluster container on the front panel and insert some Booleans. the actual Booleans are on the classic controls palette. The border of the cluster is also colored transparent with the paintbrush on the Tools palette.
-
How to create exact copy of a table
Hello,
I must admit my "google skills" have failed me and it is possible that I might be missing something obvious here but allow me to explain.
If I have a table that is populated/accessed by a typical OLTP application such that over time the data in the table may become "fragmented".
I know that is a very controversial term I used but that is not the question here. A simple way to describe the state of the table might be
that the table has always been populated with lots of small INSERTs, modified with lots of small UPDATEs and data has been deleted in small DELETEs.
This has meant that the data is neither closely stored in data blocks nor is in any particular order (so there are some empty blocks under HWM).
Now my question is how do I create exact copy of this table and its indexes AS THEY EXIST AT THE MOMENT that includes
1) its data
2) its constraints/indexes etc.
3) its storage parameters
4) data stored in EXACTLY same manner as in original table.
To avoid complications, the table in question is just a normal heap table without any partitioning involved. While CREATE TABLE AS SELECT (or CREATE
TABLE followed by INSERT) will take care of points (1) to (3) above, it will not achieve point (4) above.
Can somebody please help?
Thanks in advance.Exp/Imp...
C:\Windows\system32>expdp scott/tiger dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables="emp" constraints=y indexes=y statistics=y
Export: Release 11.2.0.1.0 - Production on Sat Nov 24 15:35:34 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Legacy Mode Active due to the following parameters:
Legacy Mode Parameter: "constraints=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "indexes=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "statistics=y" Location: Command Line, ignored.
Legacy Mode has set reuse_dumpfiles=true parameter.
Starting "SCOTT"."SYS_EXPORT_TABLE_01": scott/******** dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables=emp reuse_dumpfiles=true
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."EMP" 8.570 KB 14 rows
Master table "SCOTT"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_TABLE_01 is:
E:\APP\SERVERROOM\ADMIN\ORCL\DPDUMP\SCOTTEMP.DMP
Job "SCOTT"."SYS_EXPORT_TABLE_01" successfully completed at 15:35:38
C:\Windows\system32>impdp scott/tiger dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables="emp" constraints=y indexes=y statistics=y logfile=log.txt remap_schema=scott:hr
Import: Release 11.2.0.1.0 - Production on Sat Nov 24 15:48:20 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Legacy Mode Active due to the following parameters:
Legacy Mode Parameter: "constraints=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "indexes=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "statistics=y" Location: Command Line, ignored.
Master table "SCOTT"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_IMPORT_TABLE_01": scott/******** dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables=emp logfile=log.txt remap_schema=scott:hr
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "HR"."EMP" 8.570 KB 14 rows
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "HR"."EMP" ADD CONSTRAINT "FK_DEPTNO" FOREIGN KEY ("DEPTNO") REFERENCES "HR"."DEPT" ("DEPTNO") ENABLE NOVALIDATE
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "SCOTT"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 15:48:22
C:\Windows\system32>sqlplus hr/hr
SQL*Plus: Release 11.2.0.1.0 Production on Sat Nov 24 15:48:32 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from emp;
...Result is there.
14 rows selected.
SQL>
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
are understandable.Regards
Girish Sharma -
[ADF Help] How to create a view for multiple tables
Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AMHi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon
Maybe you are looking for
-
Incorrect value of Auto.Gain/Loss Forex during GRIR Clearing
Dear Experts, We have activated the Material Ledger functionality. The Document Currency of PO, GR, and IR are in Foreign Currency. The postings are below: Loc Currency 1 = USD Loc Currency 3 = IDR Doc currency = IDR GR Dr Material 5
-
'You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 67 days.' What is this? It's the most frustrating thing, and I just wnt to scream 'I DIDN'T'. 23
-
Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera
I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?
-
Import users from BIAR file -- users not listed in import screen of Wizard
Hi, we try to import users from a BO XI R2 SP4 running on Windows to our BO XI R2 SP4 running on Linux (both use Oracle database). When I try to import users with the Import Wizard, I can't see the list of users so at the end of the import and show
-
Hello, everyone. I am trying to design a image processing IP core with vivado hls 2014.4. From xapp1167, I have known that video functions provided by vivado hls should be used with AXI4 video stream and VDMA. However, I want to write/read image da