How to create a condition based on a select that retrieve dynamically a LOV

Hi all, I need to create a condition based on a select that retrieve dynamically a LOV.
So, the condition have to be:
inventory_item_id NOT IN (SELECT inventory_item_id FROM apps.mtl_system_items_kfv WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV')
I need to create a LOV based on this select without making any join with the folder which contains the field inventory_item_id, because otherwise I have the contradiction:
and o124757.INVENTORY_ITEM_ID = o118741.INVENTORY_ITEM_ID -- join between the main custom folder (o118741) and the LOV custom folder (o124757)
and o118741.INVENTORY_ITEM_ID NOT IN (o124757.INVENTORY_ITEM_ID) -- condition
These two condition together don't show any data, obviously....This means also, that I can't use a calculated field, because if I want to see this field, I have to create a join, another time, with the main custom folder.
I tried to create a LOV on the Administrator, but when I create the condition I have to check manually the values....and if in the future this LOV will increase I need every time to re-check all the values.....instead I need that the inventory_item_id have to be NOT IN dinamically in the list of values retrieved by the select.
Anybody has inplemented something similar ??
Thanks in advance
Alex

Hi alex,
SELECT incidents.INVENTORY_ITEM_ID,
pcodes.PROBLEM_NAME
FROM apps.cs_incidents_all_b incidents,apps.jtf_rs_problem_codes_v pcodes
WHERE incidents.category_id IN (SELECT category_id
FROM mtl_categories_kfv
WHERE concatenated_segments = 'IPTV')
AND incidents.PROBLEM_CODE = pcodes.PROBLEM_CODE
where incidents.INVENTORY_ITEM_ID NOT IN SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
You want to add this condition to the first query it holds good for this scenerio.All the items which are NOT IN will be retrieved.Here you are selecting other than "General_faults_iptv"
But again your trying to select in the second query where you want "General_faults_iptv"
SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
If you carefully go through what your doing,you will understand.In the above explantion ,there will be no records generated.First query your saying NOT IN and again your saying for the same IN,how will records retrieve its meaningless.
I dont know what you want to get from second query.I would suggest you to do is dont use the second query and just use the first query and you will get.Here is the query and this will give you result.
SELECT incidents.INVENTORY_ITEM_ID,
pcodes.PROBLEM_NAME
FROM apps.cs_incidents_all_b incidents,apps.jtf_rs_problem_codes_v pcodes
WHERE incidents.category_id IN (SELECT category_id
FROM mtl_categories_kfv
WHERE concatenated_segments = 'IPTV')
AND incidents.PROBLEM_CODE = pcodes.PROBLEM_CODE
AND incidents.INVENTORY_ITEM_ID NOT IN SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
Regards,
Kranthi.

Similar Messages

  • Create a condition based on a select

    Hi, I have the necessity to create a condition, inside a report, based on a select, for example (when I build a condition):
    Item: "Item (RUO)".Description
    Condition: IN
    Values: select item_description from ISUPP_LOV_RUO_SLA_PRODUCTS_V -> 3 values
    How can I dynamically pass these 3 values to the condition, without using hard coded strings as 'A','B','C' ??
    Thanks
    Alessandro

    Hi,
    If you are using Discoverer Desktop then you can create a condition based on a subquery. You create worksheet that returns those 3 rows then create the condition where then item is in the first worksheet.
    If you are Discoverer Plus then you will have to join the folders in the EUL. So you create a folder for ISUPP_LOV_RUO_SLA_PRODUCTS_V and join it to the report folder using "Item (RUO)".Description = ISUPP_LOV_RUO_SLA_PRODUCTS_V.item_description .
    Rod West

  • How to create report condition based on "total"

    Hello,
    I have a Discoverer report that shows revenue by city and sub-totals revenue by state.
    I need to modify this report so that only cities in states with revenue (sub-total) more than one million are pulled.
    Example:
    Pittsburgh - 100,000
    Harrisburg - 200,000
    Erie - 300,000
    ------State:PA 600,000
    Los Angeles 500,000
    San Fransisco 600,000
    Oakland 200,000
    -----State:CA 1,300,000
    In this example, the report should show only the cities in California, as the revenue sum is over 1 million:
    Los Angeles 500,000
    San Fransisco 600,000
    Oakland 200,000
    ---State:CA 1,300,000
    Is this possible?
    I'm using Discoverer version 10.1.2.2.
    Thank you.
    Edited by: [email protected] on Dec 11, 2009 3:03 PM

    Hello
    You need to do two things to solve this problem.
    1. You need to create an analytic calculation that returns 1 when the sum of the revenue in all of the cities in a state is one million or more
    2. You need to create a condition such that you only include states when the above is 1
    Let's call the calculation, OneMillionStates and I will assume your fields are called State, City and Revenue
    Here's the formula:
    CASE WHEN SUM(REVENUE) OVER(PARTITION BY STATE) > 1000000 THEN 1 ELSE 0 END
    Now your condition shoudl be: ONEMILLIONSTATE = 1
    You don't even need to display the calculation on screen and notice how the city does not even come into the calculation.
    Best wishes
    Michael
    URL: http://ascbi.com
    Blog: http://learndiscoverer.blogspot.com

  • How to create a report based on the selection of a node of a tree

    Hello,
    I am new to Oracle Apex and I was trying to build a tree and also an interactive report based on the empno column of the emp table.
    I have created a tree based on emp table. Now I want to display records of the employee selected in the tree.
    Here is the tree query:
    select case when connect_by_isleaf = 1 then 0
    when level = 1 then 1
    else -1
    end as status,
    level,
    "ENAME" as title,
    null as icon,
    "EMPNO" as value,
    null as tooltip,
    null as link
    from "#OWNER#"."EMP"
    start with "MGR" is null
    connect by prior "EMPNO" = "MGR"
    order siblings by "ENAME"
    Can anyone tell me step by step how to go from here?
    I tried to follow the thread Re: tree question but could not understand much from it.

    The approach for reloading the page and displaying the report is quite simple.
    <li>You start by creating a new page item which would be used to store the selected node ID , eg. P100_SELECTED_NODE (you can make it atext item and change it hidden once everything works as expected)
    <li>Modify the tree query and change the link column in the tree definition SQL query to a link to the same
    for example if your page is 100 , you would make the tree node link to the same page but set the P100SELECTED_NODE with selected node's id_
    This done here
    {message:id=4410987}
    In this case it would be
    'f?p=&APP_ID.:100:'||:APP_SESSION||'::::P100_SELECTED_NODE:'||EMPNO as link Now when you click on a tree node link , it would come back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.
    <li> All that is left to do, is changing your Report so that it refers to the new item inorder to filter the records for this employee i.e empno
    SELECT ...
    WHERE empno= :P100_SELECTED_NODE

  • How to create a report based on radia selection

    Hi,
    I am new bie to Appex, I have a requiment to generate a report based on existing table with the select creditaria. I mean, the select creditaria wil be the radio button, if i click any option the report will change accordingly.
    It is nothing but filter condition but i need to do with the radio button/items. Please give the detail steps
    Thanks in advance.
    Kumar.

    Kumar,
    First you will need to create the radio group on the page with the report and determine the list of values you would like to filter the report on (dynamic or static). ie:
    select CUST_STATE as display_value, CUST_STATE as return_value
      from DEMO_CUSTOMERS
    order by 1Then you will need to update the report's where clause (demo application page 2 example):
    select customer_id, cust_last_name || ', ' || cust_first_name customer_name, CUST_STREET_ADDRESS1 || decode(CUST_STREET_ADDRESS2, null, null, ', ' || CUST_STREET_ADDRESS2) customer_address, cust_city, cust_state, cust_postal_code
    from demo_customers
    where cust_state = :P2_RADIOWith an Interactive Report, make sure you list the radio group item (P2_RADIO) in the "Page Items to Submit" fields in the report region.
    The you can create an on change dynamic action based on the radio group to refresh the Report region. I made a quick example on apex.oracle.com
    http://apex.oracle.com/pls/apex/f?p=34760:2
    Depending on the number of items in the radio group, you may want to think about using a select list also.
    V/R
    Ricker

  • How to create a report  based on selected item from Select list?

    Hi,
    I have created a tables_LOV based on:
    select table_name d, table_name r from user_tab_cols
    where column_name like '%_type%'
    Then I created a page item ListOfTables,  Display as select list and pointing to tables_LOV.
    I run the page, and i can select the table i want from the drop down list.
    How to create a report  based on the selected item? (ex: select * from selected_table)
    many thanks in advance
    Salah

    Hi Salah,
    Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
    I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
    The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
    To recreate my example you should:
    1) create an (interactive) report on your collection
    SELECT *
       FROM APEX_collections
    WHERE collection_name = 'MY_COLLECTION'
    2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
    3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
    declare
      l_query varchar2(4000);
    begin
      l_query := 'select * from '||:P38_TABLES;
      if apex_collection.collection_exists
            ( p_collection_name => 'MY_COLLECTION' )
      then
        apex_collection.delete_collection
          ( p_collection_name => 'MY_COLLECTION' );
      end if;
      apex_collection.create_collection_from_query
        ( p_collection_name => 'MY_COLLECTION'
        , p_query           => l_query
    end;
    Make sure you add your page_item to the "Page Items to Submit" section.
    4) Add an extra true action that does a refresh of the report region.
    Here are two pictures describing the da:
    http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
    http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
    Good luck and regards,
    Vincent
    http://vincentdeelen.blogspot.com

  • How to create Reference Condition Types

    Hi ,
                 Please tell me how to create Ref.Condition Types?
    I have a requirement.."I should create a Zdiscount(13%) which should be copied to the sales order automatically based on PR00"
    How to do that?
    Points for sure
    RamChandra

    Hi,
    You can use condition supplement functionality.
    Check the link [Condition Supplements|http://help.sap.com/saphelp_47x200/helpdata/en/93/7432de546011d1a7020000e829fd11/frameset.htm]
    You can also check the field RefConType for the discount condition type in SPRO -> Sales and distribution -> Basic functions ->Pricing -> Pricing control ->Define condition type.
    Regards,

  • How to create a report based on a DataSet programatically

    I'm working on a CR 2008 Add-in.
    Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
    I have a dataset in memory, and want to create a new report in cr2008.
    The new report is a blank report (with no connection information).
    If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
    The report has no tables.
    So I must programmatically define the table definition in my blank report.
    I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
    internal class NewReportWorker : Worker
          public NewReportWorker(string reportFileName)
             : base(reportFileName)
    public override void Process()
             DatabaseController databaseController = ClientDoc.DatabaseController;
             Table table = new Table();
             string tabelName = "Table140";
             table.Name = tabelName;
             table.Alias = tabelName;
             table.QualifiedName = tabelName;
             table.Description = tabelName;
             var fields = new Fields();
             var dbField = new DBField();
             var fieldName = "ID";
             dbField.Description = fieldName;
             dbField.HeadingText = fieldName;
             dbField.Name = fieldName;
             dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
             fields.Add(dbField);
             dbField = new DBField();
             fieldName = "IDLEGITIMATIEBEWIJS";
             dbField.Description = fieldName;
             dbField.HeadingText = fieldName;
             dbField.Name = fieldName;
             dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
             fields.Add(dbField);
             // More code for more tables to add.
             table.DataFields = fields;
             //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
             //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
             //info.Attributes.Add("Databse DLL", "xxx.dll");
             //table.ConnectionInfo = info;
             // Here an error occurs.
             databaseController.AddTable(table, null);
             ReportDoc.SetDataSource( [MyFilledDataSet] );
             //object path = @"d:\logfiles\";
             //ClientDoc.SaveAs("test.rpt", ref path, 0);
    The object ClientDoc referes to a ISCDReportClientDocument in a base class:
       internal abstract class Worker
          private ReportDocument _ReportDoc;
          private ISCDReportClientDocument _ClientDoc;
          private string _ReportFileName;
          public Worker(string reportFileName)
             _ReportFileName = reportFileName;
             _ReportDoc = new ReportDocument();
             // Load the report from file path passed by the designer.
             _ReportDoc.Load(reportFileName);
             // Create a RAS Document through In-Proc RAS through the RPTDoc.
             _ClientDoc = _ReportDoc.ReportClientDocument;
          public string ReportFileName
             get
                return _ReportFileName;
          public ReportDocument ReportDoc
             get
                return _ReportDoc;
          public ISCDReportClientDocument ClientDoc
             get
                return _ClientDoc;
    But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
    What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

    Hi,
    Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
    //=========================================================================
    +           * the following two string values can be modified to reflect your system+
    +          ************************************************************************************************/+
    +          string mdb_path = "C:
    program files
    crystal decisions
    crystal reports 9
    samples
    en
    databases
    xtreme.mdb";    // path to xtreme.mdb file+
    +          string xsd_path = "C:
    Crystal
    rasnet
    ras9_csharp_win_datasetreport
    customer.xsd";  // path to customer schema file+
    +          // Dataset+
    +          OleDbConnection m_connection;                         // ado.net connection+
    +          OleDbDataAdapter m_adapter;                              // ado.net adapter+
    +          System.Data.DataSet m_dataset;                         // ado.net dataset+
    +          // CR variables+
    +          ReportClientDocument m_crReportDocument;          // report client document+
    +          Field m_crFieldCustomer;+
    +          Field m_crFieldCountry;+
    +          void CreateData()+
    +          {+
    +               // Create OLEDB connection+
    +               m_connection = new OleDbConnection();+
    +               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
    +               // Create Data Adapter+
    +               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
    +               // create dataset and fill+
    +               m_dataset = new System.Data.DataSet();+
    +               m_adapter.Fill(m_dataset, "Customer");+
    +               // create a schema file+
    +               m_dataset.WriteXmlSchema(xsd_path);+
    +          }+
    +          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
    +          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
    +          void AddDataSourceUsingDataSet(+
    +               ReportClientDocument rcDoc,          // report client document+
    +               System.Data.DataSet data)          // dataset+
    +          {+
    +               // add a datasource+
    +               DataSetConverter.AddDataSource(rcDoc, data);+
    +          }+
    +          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
    +          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
    +          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
    +          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
    +          // above.+
    +          void AddDataSourceUsingSchemaFile(+
    +               ReportClientDocument rcDoc,          // report client document+
    +               string schema_file_name,          // xml schema file location+
    +               string table_name,                    // table to be added+
    +               System.Data.DataSet data)          // dataset+
    +          {+
    +               PropertyBag crLogonInfo;               // logon info+
    +               PropertyBag crAttributes;               // logon attributes+
    +               ConnectionInfo crConnectionInfo;     // connection info+
    +               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
    +               // database table+
    +               // create logon property+
    +               crLogonInfo = new PropertyBag();+
    +               crLogonInfo["XML File Path"] = schema_file_name;+
    +               // create logon attributes+
    +               crAttributes = new PropertyBag();+
    +               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
    +               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
    +               crAttributes["QE_ServerDescription"] = "NewDataSet";+
    +               crAttributes["QE_SQLDB"] = true;+
    +               crAttributes["QE_LogonProperties"] = crLogonInfo;+
    +               // create connection info+
    +               crConnectionInfo = new ConnectionInfo();+
    +               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
    +               crConnectionInfo.Attributes = crAttributes;+
    +               // create a table+
    +               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
    +               crTable.ConnectionInfo = crConnectionInfo;+
    +               crTable.Name = table_name;+
    +               crTable.Alias = table_name;+
    +               // add a table+
    +               rcDoc.DatabaseController.AddTable(crTable, null);+
    +               // pass dataset+
    +               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
    +          }+
    +          void CreateReport()+
    +          {+
    +               int iField;+
    +               // create ado.net dataset+
    +               CreateData();+
    +               // create report client document+
    +               m_crReportDocument = new ReportClientDocument();+
    +               m_crReportDocument.ReportAppServer = "127.0.0.1";+
    +               // new report document+
    +               m_crReportDocument.New();+
    +               // add a datasource using a schema file+
    +               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
    +               // for more information, refer to comments on these methods.+
    +               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
    +                              +
    +               // get Customer Name and Country fields+
    +               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
    +               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
    +               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
    +               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
    +               // add Customer Name and Country fields+
    +               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
    +               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
    +               // view report+
    +               crystalReportViewer1.ReportSource = m_crReportDocument;+
    +          }+
    +          public Form1()+
    +          {+
    +               //+
    +               // Required for Windows Form Designer support+
    +               //+
    +               InitializeComponent();+
    +               // Create Report+
    +               CreateReport();+
    +               //+
    +               // TODO: Add any constructor code after InitializeComponent call+
    +               //+
    +          }+//=========================================================================

  • HOW TO CREATE A DFF BASED ON ORGANIZATION

    Hi,
    I want to create a DFF which would have 5 different context values, i want 2 of them to be available in one organization and other 3 in other organization, how i can achieve this.
    Regards,
    Usman.

    Hello,
    "HOW TO CREATE A DFF BASED ON ORGANIZATION"
    1- I will create a customized table having two columns one is for context name and other is for org_id,
    2- then i will create a value set on this table and will use this on 'Value Set' field on 'Descriptive Flexfield Segments' window.
    3- In the where clause of this value set i will pass org_id from profile $PROFILES$.ORG_ID,
    4- this will restrict the context based on org_id And user will only have context related to there org
    I have successfully achieved the above requirment.
    Find below the restriction you should follow so that Value set is available in LOVs on "Descriptive Flexfield Segments" window:
    Value sets used for context fields must obey certain restrictions or they will not be available to use in the Value Set field in the Context Field region of the Descriptive
    Flexfield Segments window:
    • Format Type must be Character (Char)
    • Numbers Only must not be checked (alphabetic characters are allowed)
    • Uppercase Only must not be checked (mixed case is allowed)
    • Right-justify and Zero-fill Numbers must not be checked
    • Validation Type must be Independent or Table
    If the validation type is Independent:
    • the value set maximum size must be less than or equal to 30
    If the validation type is Table:
    • the ID Column must be defined, it must be Char or Varchar2 type, and its size must
    be less than or equal to 30. The ID column corresponds to the context field value
    code (the internal, non-translated context field value).
    • the Value Column must be defined, it must be Char or Varchar2 type, and its size
    must be less than or equal to 80. The Value column corresponds to the context field
    value name (the displayed context field value).
    • the value set maximum size must be less than or equal to 80
    All context field values (the code values) you intend to use must exist in the value set. If
    you define context field values in the Context Field Values block of the Descriptive
    Flexfield Segments window that do not exist in the context field value set, they will be
    ignored, even if you have defined context-sensitive segments for them.
    Best Regards,
    Usman.

  • How to create a record based on the name of a file in the file-system?

    Hi,
    With a lot of pictures I want to have a database to gather some information about these pictures.
    First question is how to generate a record based on a file in the file system?
    e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
    now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
    any suggestions?
    any reaction will be appreciated.
    Leo

    Link to Create directory
    http://www.adp-gmbh.ch/ora/sql/create_directory.html
    You can create a list of files in the directory and read the list files from that directory.
    [UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
    [Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
    SS

  • How to create a condition in sap

    Hi all,
    How to create a condition in sap
    i want to create a condition in sap quotation. how to solve this issue please give me idea step by step.
    [http://www.4shared.com/document/MQiBd3bP/screenshot.html]
    Thanks & Regards
    Ambrish
    Edited by: ambrish dwivedi on Feb 28, 2011 12:29 PM
    Moderator message: not related to ABAP development, please do some research before asking.
    Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

    Hello Ambrish,
    Which condition are you talking about ?
    is it the calculation you want to do in ur driver program or kind of routines which are used in Pricing ?

  • How to create greater_or_equal condition for file_io storage

    Dear experts,
    Please tell me the how to create greater_or_equal condition for query in file_io as RationalOperatorType.GREATER_OR_EQUAL is not supported for file_IO storage.
    thanks n regards,
    Kapoorchand.

    Hi,
    not sure if I got you correctly, but in
    com.sap.ip.me.api.persist.query.RelationalOperatorType
    There is no condition available that you are looking for. Why do you not work with
    public interface Condition
    Represents a condition for a query. This can either be a single condition, as FIELD = VALUE and / or a composite condition, as ( ( FIELD1 = VALUE1 OR FIELD2 = VALUE2 ) AND FIELDE 3 <> VALUE3 ).
    Hope this helps!
    Regards,
    Oliver

  • How to create an ODS based on a particular table

    Can Anybody tell me how to create an ODS based on a particular table and what are the basic requirements for that

    Hi Priya,
    If my understanding is right, you want to create an ODS based on a database table.
    Here, I will assume that you already know how to create an ODS. Otherwise, do let me know so that I can guide you on how to do it.
    Basically, an ODS consists of two important sections i.e.
    1. Key Fields
    2. Data Fields
    First, we must identify what are the field(s) in the table that make its records unique. You can think of this as database's primary key(s) e.g. Document Number. These field(s) must be inserted in ODS' Key Fields section. You can only insert Characteristics in Key Fields and the InfoObjects in this section will uniquely identify an ODS record or line item.
    Next, you can include the rest of the fields (either Characteristics and Key Figures) in ODS' Data Fields and activate the ODS.
    Having done that, you have already successfully create an ODS based on a database table.
    Hope that helps.
    Best wishes,
    Syuhair.

  • How to create the PO based on requisition through interface.

    Hi,
    In P2P,
    How to create the PO based on requisition through interface.
    Regards,
    Srikanth

    Hi Srikanth,
    I knew it from frontend.
    But i want from backend using INTERFACE .please see if this can help you
    http://appshub-hussy.blogspot.com/2010/10/requisition-and-purchase-order-queries.html
    http://oraclemaniac.com/2012/04/17/sql-queries-to-get-requisition-po-and-po-receipt-details/
    SQL to link Requisitions with Purchase Orders
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-find-the-po-number-if-we-give-requisition-number-3161211
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/need-requisition-sql-query-1338985
    ;) AppSmAstI ;)
    sharing is CAring

  • How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA.

    How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
    so do i  have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
    So please suggest me to accomplish this task.
    Thanks and regards
    Shashi kiran

    Please have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
    Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
    Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA

Maybe you are looking for

  • An iPhone Burned My Girlfriend... And Now Will Not Charge/Sync

    So last week my girlfriend's iPhone 3gs did something new. She had just plugged it into the charger - the one that came with the phone when she purchased it - and plugged the charger into a wall outlet. My iPhone charger occupied the other socket. Wi

  • XI: Remove Carriage Return +Line Feed at end of XML

    Hi All, Scenario Currently, we have a JMS --> XI --> IDOC scenario. The Sender Service always sends a CRLF (Carriage Return & Line Feed+) without fail at the end of each xml file once this non-sap system finishes its transaction. Example <STARTOFXML>

  • SQL Drill through??

    I am new to the Essbase world. We have a few business requirements that requires us to report on a flat measure (it does not make sense to be a part of the cube as it can not be aggregated across dimensions) along with other measures from the cube. W

  • Newbie looking for E-MU Manual

    Have 200+ DAT tapes that I would like to archive to computer (internal or external) storage but recognize this would need to be via USB. Have capability to burn CD-Rs which could then be ripped to storage but this would be a huge task with wasted ste

  • SXMB_MONI DUPLICATE MESSAGES

    my sender adapter(seeburger) is picking the file successfully. But when i check in sxmb_moni there are two messages .so two idcos are getting created. Can you please help me out in solving this issue. It must be having only one message.