How to Create a Cost object for a Rental object in RE-FX

Dear Friends,
We have created one Building and it has been assigned with an Asset Master.When depreciation is posted it is debiting to the Cost Center attached to the asset master.
Here the requirement is to allocate the Cost from the Cost Center to the Rental objects Created under the Building based on the Floor area of the rental Contracts/Rental objects.
Can you please suggest how to resolve the issue & how to distribute the Cost from Cost Center to Rental objects.
Thanks and Regards
Gyanendra
+919963062333

hi.........
When you to create rental unit all the relevant details as rent, floor area etc are mentioned in master itself in different tabs check whether it is being maintained or not. Further on right hand side on the top there is one button for co settlement rule click on it and maintain settlement rule give sender as rental unit & receiver as cost centres you want. Thereafter execute the settlement. Apportionment will be done as required.
Hope this will solve your problem.
Regards
Manish Jain
Pls assign points if your problem get solved.

Similar Messages

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

How to create a container class for 2 object?

I use JDK to create 2 objects, one is Customer and one is Book. I need to enqueue these 2 objects, but they canot share the same queue class. Some one told me that I can create a container class for these 2 objects but I don't know how to create it. Can some one tell me how to create the container class?

I use JDK to create 2 objects, one is Customer and one
is Book. I need to enqueue these 2 objects, but they
canot share the same queue class. Some one told me
that I can create a container class for these 2
objects but I don't know how to create it. Can some
one tell me how to create the container class?
class CustomerBook{
Book m_book;
Customer m_customer;
pulbic CustomerBook (Customer customer, Book book){
m_book = book;
m_customer = customer;
}If you want to create a class that represents one customer and many books, do this:
class CustomerBooks{
Vector m_books;
Customer m_customer;
pulbic CustomerBook (Customer customer){
m_books = new Vector();
m_customer = customer;
public void addBook (Book book){
m_books.addElement (book);
public void displayBooks (){
//I assume the Book class has a toString method or something similar
for (int i = 0;i < m_books.size();i++){
System.out.println ("book: "+((Book)m_books.elementAt(i)).toString());

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Can we create a cost element for a Balance Sheet account?

Hi folks,
Is it possible to create a cost element for a balance sheet account? If yes, what are the scenerios we would need it and how is it done?
thanks in advance

Hello
Please review the below information regarding cost elements category 90 : Financial Accounting Balance Sheet Accounts
Category 90 is automatically assigned when you create cost elements in CO whose   general ledger accounts in FI are asset reconciliation accounts
(special balance sheet accounts), not income statement accounts. You
cannot change this category in CO master data maintenance.
FI does not require CO account assignments to cost elements of
category 90. However, if you enter an account assignment, it is only
recorded statistically for real objects.
Category 90 allows you to check order or project budgets for fixed
asset procurement. To do so, enter the investment order or WBS element
in the corresponding field in the asset master. The Asset Management
component ensures that the order or element automatically appears in
the document when you access the asset procurement.
The R/3 System debits the order/WBS element statistically in the
Controlling component, which you can then monitor with availability
control.
You can treat cost elements of category 90 as activity-independent as
part of cost center planning.
Also see note 75980 for further information. From the note:
The use of cost element category 90 is only provided in the standard
system in the following two cases:
1. As of Release 3.0G, asset acquisitions and down payments which are
      assigned directly to a fixed asset or asset under construction can
      be assigned to an account on internal orders or WBS elements
      statistically. In this manner, for example, an availability check
      can be triggered on the order or the WBS element for asset posting.
2. As of Release 4.0, cost elements of category 90 can also be created
      for material stock accounts to display material make-to-order stocks
      on sales orders or customer projects.
Regards
Javier Reviriego

How to create 2 char infoobjects for single table

Hi Friends,
Please help me how to create two chacteristics infoobjects for a single table.... Thanx in advance

Hi,
If i understand your question right, you want one table (SID) to be shared between two info objects. It is possible if one info object uses the other info object as its reference.
Create a reference info object.
-Vikram

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

How to create new cost element catagory

Hi,
Can any one let me know How to create New cost element catagory other than standard cost element catagory.
Thanks & Regds,
Sany.....

Hi,
We are using one GL to post expences as well as revenue for the same. In copa primery cost elements are not allowed & if i set clem cat to revenue it wont allow me to book purchase in same GL.
Waiting for your reply.
Regards,
Sany.

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

How to create a new template for pages in iPad?

How to create a new template for pages in iPad?

In spite of the latest updates Pages for iPad does not support:
1) User templates
2) Headers
3) Footers
4) Page numbers
and it is not compatible with Pages for OSX, a document cannot be edited alternatively on Mac and iPad without destroying headers and footers.
- The Word export is far from perfect
- Does not really support Page Layout mode (you cannot duplicate a page at least)
- Does not have a multi-page overview
- The spelling support of iOS and OSX is at the level of Apple Maps except 4-5 languages.
- It takes a long time until it starts
INSTEAD, according to the latest updates:
- It can do change tracking
- Lock and unlock objects
- Add reflections to shapes
Dear Apple, please understand:
- We like iPad and we wish to use it for real work.
- We wish to have user templates, headers, footers and page numbers.
- We do not expect all the features of Pages for OSX, but we do expect real compatibility.
- We do not wish to switch back to Word for Windows unless you force us.
Please try to concentrate on real development not on unimportant changes like in the latest dissapointing update.

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to Create a Cost object for a Rental object in RE-FX

Similar Messages

Maybe you are looking for