How to create a Global Contacts in our CM or Voice Gateway

Hi
we have a UCM6.1.2 and a H.323 voice gateway
we get many calls from different vendors and so on
i want to some how assign a contact or a name to the calls that come in often
for example
if we get 100 calls from 973-333-3333 i want that number to show up and also the customer's name for example Customer XYZ
can i do this any where?
is it possible?
any help will be appreciated.
Thanks
Regards

You can configure Caller ID which is an analog service offered by a central office, which supplies calling party information to subscribers.
Caller ID Name Delivery Issues on Cisco IOS Gateways:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml
Caller ID:
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_voice_configuration_library_glossary/vclclid.html

Similar Messages

  • How to Save Global Contacts in our CM or Voice Gateway

    Hi
    we have a UCM6.1.2 and a H.323 voice gateway
    we get many calls from different vendors and so on
    i want to some how assign a contact or a name to the calls that come in often
    for example
    if we get 100 calls from 973-333-3333 i want that number to show up and also the customer's name for example Customer XYZ
    can i do this any where?
    is it possible?
    any help will be appreciated.
    Thanks
    Regards

    You can configure Caller ID which is an analog service offered by a central office, which supplies calling party information to subscribers.
    Caller ID Name Delivery Issues on Cisco IOS Gateways:
    http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml
    Caller ID:
    http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_voice_configuration_library_glossary/vclclid.html

  • How to create a group contact list on iphone4?

    how to create a group contact list on iphone4?

    You can create your groups on your computer and sync them on your iPhone. Or you can use an application. I developped Easy Group, to manage group of contacts, and send group texts and group emails.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How to create a global variable in forms 6i

    How to create a global variable in forms 6i

    :GLOBAL.my_var := 15; Well, this statement is not correct! Global variables
    stores a character string of up to 255 characters in
    length. Thus, valid statement for Khurram example
    is:
    :GLOBAL.my_var := TO_CHAR(15);
    or
    :GLOBAL.my_var := '15';
    But numeric values are implicitly converted by oracle so there's nothing in fact wrong with the statement...
    :GLOBAL.my_var := 15;
    ;)

  • How did we add a contact to our favorite in iOS 8 to access them in the multitasking ?

    Is it possible to add a contact to our favorite to access them after in te multitasking of iOS 8 ? Thank You !

    On the apple website : "From any screen, press the Home button twice to see the multitasking interface. At the top, you’ll notice something new: the faces of people you’ve recently talked to and — if you swipe to the right — your favourite contacts as well. "
    I Just want to know how did we add a contact to our favorite (and so to add his face in that section (like in this capture))
    ps: (sorry for my bad english)

  • How to create and print contact sheet using photoshop elements 10?

    how to create and print contact sheet with photoshop 10?

    Which operating system are you using?
    On a windows system you can use the Organizer
    http://www.dummies.com/how-to/content/how-to-print-contact-sheets-in-photoshop-elements-.h tml
    On a Mac, File>Contact Sheet II within the pse 10 editor

  • How to create a Proof/Contact sheet in CS5??

    Hey there,
    I'm using Bridge CS5 and trying to work out how to create a Proof/Contact sheet as then save as a PDF?
    I found a tutorial online, but when I followed the instructions and went into the 'Output' Workspace... the actual Output Panel doesn't come up, and I'm confused why.
    Please help

    Hi there
    The help is saying to click View > Toolbars > Formatting (in case the toolbar has been turned off)
    Perhaps the image below will better assist in locating the icon.
    Cheers... Rick

  • How to creat a global variable?

    I want to creat a start button of global variable to control different programs in the sequence structure. But I do not know how to creat it. Thanks for answering.
    Solved!
    Go to Solution.

    Perry Liu wrote:
    Thanks for answering. I attached the code below.
    What I want to do is to combine Get Voc/Isc and GO buttons (shown in the front panal) to one button, and also combine Setup Linear Stair Sweep and start sweep together. I do now find a good way to do that. Thanks so much for your kind help.
    There is no "Get Voc/Isc" or "GO" button anywhere on the front panel, and I have no idea what you mean by "Setup Linear Stair Sweep" and "start sweep". Are you sure you uploaded the correct code?
    Other VI comments:
    You are abusing/misusing global variables. 
    You already have a state machine, so you can actually code this using just the state machine without actually needing the separate event structure loop. Even if you do keep it, that still does not require you to use global variables.
    Why do you have a loop around the Write to Spreadsheet File? This serves no purpose and actually stops your code in that loop until the Stop global is set. This doesn't make much sense.
    Since you do not have a path wired to the Write to Spreadheet File VI, you will be asked for a path each time the loop iterates. Use a shift register to hold the value of the path from iteration to iteration.
    Get rid of the Build XY Graph Express VI and those Convert to Dynamic Data functions. Replace with a single Bundle function.

  • Address book in OSX 10.7.2: how to create a new contacts group?

    Hi.
    I have upgraded to OSX 10.7.2 on my MacBook Pro.
    How can I create a new contacts group  using addresses in my Address Book?
    The idea is to use the group to send emails to a bunch of people without having to write them in individually.
    (Before, on on OSX 10.5, I went into my Address Book, clicked on the left to  "Add a Group" and then slid in the contact files I wanted to include in the group.
    Tx for helping!
    Ray

    Open adress book with 2 pages exposed and reach the position with the groups listed on the left page.
    In the bottom left corner there is a "+" ... just click on it
    Even easyer... press shift command N

  • How to create Groups in contacts

    Hello,
    I have a Z10 blackberry and I want to creat groups in contacts to be able to send messages to several personns at the same time.
    Could you help me please.
    I would like to know also if it is possible to call a personn when we are in the text messages application and if it is possible to send messages to a contact from the application contacts.
    Thank you very much for your help.
    Marie-Annick
    Solved!
    Go to Solution.

    Marie-Annick wrote:
    I have a Z10 blackberry and I want to creat groups in contacts to be able to send messages to several personns at the same time.
    Hello Marie-Annick, the group addresses feature is currently not available ON the device itself.
    Marie-Annick wrote:
    I would like to know also if it is possible to call a personn when we are in the text messages application and if it is possible to send messages to a contact from the application contacts.
    In the text messages, touch the name of the person at the blue top > you're taken that contact's Address Book entry > touch the number to call.
    From the Contacts application with a contact open touch and hold the number you wish to call. You'll see entries Call XXX or Text XXX.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to create a global query view

    Hi,
    How to save a query view as global,if user A was to create a view 'V1' , user B should be able to see 'V1' in his list of query views.
    Currently i have created views using bex Analyzer and using the save function in the query designer,but these views are local to the user and cannot be opened by other users.
    In 3.5 we had an option to save view as global from Analyzer.We are on SP11
    Thanks in Advance

    Hi Kiran,
    The reason i want to create a global view is to use it as a data provider in a web template, the problem is if i were to create a view the view being local to my id will not be seen by other users,so if the view needs to be edited in the future it would have to be done by me, if it was global any user can modify the view.
    A view saved in bex portfolio is a bookmark and it as saved on the portal and cannot be opened through query designer.Any work arounds??
    Thank You.
    Karthik

  • How to create a global role with WLST in WL 10

    Hi All:
    The approach in the protect_resources.py found in dev2dev, doesn't work. I've managed to convert the user and group creation to work with WL 10, but I can't for the life of me figure out how to create the role. There doesn't seem to be a createRole() on what I would think are the appropriate MBeans in poking around.
    Anyone know how to do this, or will I have to come up with a screen scraping solution that does this via the weblogic console, where it's so easy to do so?
    TIA
    Forrest

    Not having X's programing background I think of an action reference as something that tells Photoshop what to do. And yes it is like a little action that you write instead of record. For example the code that I and X posted could also be written like this
    var ref = new ActionReference();
    ref.putProperty( charIDToTypeID( "Prpr" ), stringIDToTypeID('tool') );// what key to get
    ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );// where to get it from
    var cTool = executeActionGet(ref);// in this case returns a one key descriptor
    var cToolTypeID =  cTool.getEnumerationType( stringIDToTypeID('tool') );// get the value of that key
    alert( typeIDToStringID( cToolTypeID ) );// make that value readable
    Most of the ordinals you will see will be target as Photoshop likes whatever you are working on to be active. You sometimes see next or previous. I can't recall seeing a 'normal ordinal' like first or second.
    There is not much in the way of documentation. Most of what I know comes from looking at the scriptlistner log, xtools and X himself, and a little bit of code I put together for exploring action descriptors and action list. It's not as nice as X's getterdemo but works more the way I think. It sends it's output to the ESTK console window
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    var desc = executeActionGet(ref)
    var c = desc.count ;
    //for(var i=0;i<c;i++){ // to enumerate list
    //  $.writeln('Key '+i+' = '+desc.getType(i))
    for(var i=0;i<c;i++){ //enumerate descriptor's keys
      $.writeln('Key '+i+' = '+typeIDToStringID(desc.getKey(i))+': '+desc.getType(desc.getKey(i)))

  • How to create a company contact entry

    As opposed to creating a private entry
    For example I want to create a company contact
    On the desktop version you click the company box
    IOS doesn't have that option

    Me too, exactly the same.
    I can't work out what's happening here.
    If I create a company record on OS X  and then it sync on my ipad it displays as a company record.
    Any ideas
    Thanks

  • Automator: How to create a PDF contact sheet?

    Hi,
    I'm trying to create a PDF from multiple images in automator. The PDF should contain:
    First Page: A contact sheet with all images
    Following pages: One page for each image
    Any idea how to achieve this? I don't even get the contact sheet working – it always results in a blank PDF.
    Kind regards
    Jan

    Thanks for your reply. Unfortunately the intructions in the link don't work (did it exactly like this -> result is an empty PDF). I learned now from other posts that this is a Mavericks specific issue, which seems to be unsolved.
    Apart from this: Do you think my request is solvable at all? Because the output of the contact sheet module would be the contact sheet iteslf (if it worked). I can't use this to create the full sized PDF pages, right?

  • How to create a global error page?

    I created a small application, for which I need a global error page. I know how to navigate through the jsp page through iserrorpage and errorpage. And I'm getting the error page. When I have any error in my servlet I'm not getting the error page displayed. So I need a global error page. Can anyone help on this?
    Thanks.

    Please do not crosspost the same question over all places. It is rude in terms of netiquette.

Maybe you are looking for