How to create a new app using existing Dev & Dist certificates

Okay, I have already created one app that has been approved by Apple. Now we're ready to create a second app and we're trying to create the .p12 certificates using the existing Apple Dev and Dist Certificates. For some reason we can not get the .p12 certificates for the new app to link up with the existing Apple Dev and Dist certificates. I don't understand what I'm missing. Any help would be appreciated. Thanks!

You must have 2 folders with the following :
Dev:
aps developer identify.CER
CertificateSigningRequest.certSigningReq
Certificats.P12 (already created for your previous app)
Certificats Push Dev.P12
Mobile Provision
Distri
aps prodution identify.CER
CertificateSigningRequest.certSigningReq
Certificats distri.P12 (already created for your previous app)
Certificats Push Prod/distri.P12
Mobile Provision
Try, you will know quickly if you havent do it well

Similar Messages

How to create a new material using a BAPI?

Dear friends,
How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
Thanks a lot!

Dear,
New material can be created by using a BAPI_MATERIAL_SAVEDATA.
More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
Cheers
fareed

How to create a new component using SPICE?

People, I don't know how to create a new component using SPICE.
I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
Thank you!!

Hi,
Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
Hope you find it helpful,
Mahmoud W
National Instruments

Crystal Reports XI - How to create a new field using a formula field

I'm quite new to CR, but have been learning quickly!
I would like to know how to automatically create a new record/field based on another field in that row...
I have a report showing the following data:
Run Code     Start KM    Stop KM    Status
H2                 100            150           Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
In this example...
H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check. The 'Start KM' and 'Stop KM' is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
I want the final result to look like this...
Run Code     Start KM    Stop KM    Status
H2                  90              100         Partial
H2                 100             150          Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
Any suggestions would be more than appreciated

Hi Adi
Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
Let me know if you do not understand anything.
Regards
Nikhil

How to create a simple app using the MVC approach?

Hello gurus i'm trying to learn the SAPUI5 and i'm trying to create a simple app using the MVC i created the app and trying to add a lable to the view but there is nothing appear when i run it the code for the HTML page
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
<script src="https://sapui5.hana.ondemand.com/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m"
data-sap-ui-theme="sap_bluecrystal">
</script>

<script>
sap.ui.localResources("mytestapp");
var view = sap.ui.view({id:"idshell1", viewName:"mytestapp.shell", type:sap.ui.core.mvc.ViewType.JS});
view.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>
the code for the view
sap.ui.jsview("mytestapp.shell", {
/** Specifies the Controller belonging to this View.
* In the case that it is not implemented, or that "null" is returned, this View does not have a Controller.
* @memberOf mytestapp.shell
getControllerName : function() {
return "mytestapp.shell";
/** Is initially called once after the Controller has been instantiated. It is the place where the UI is constructed.
* Since the Controller is given to this method, its event handlers can be attached right away.
* @memberOf mytestapp.shell
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
oLabel.placeAt("content");
i dont know what is wrong or if i should use a container to display my controls
any help will be appreciated
thanks in advance

Hi,
Instead of oLabel.placeAt("content"); use return oLabel;
so it will as below,
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
return oLable;
Regards,
Chandra

How to create a new plugin using Adobe InDesign CS5?

How to create our own plugin using Adobe InDesign CS5?is there any documents available for this?

Sure. (Didn't Google find anything?)
http://www.adobe.com/devnet/indesign/sdk.html
But you don't "use" InDesign to write plugins. You need a C++ compiler and a lot of programming knowledge and experience with C++. If this means nothing to you, don't look any further -- it's way too complicated to "go and get started" at random. Adobe's documentation is not intended for learners, starters, and people who shrink back at the thought of having to read multiple help documents that are each a couple of megabytes large.
Using the SDK is so complicated there's even a part of the forum dedicated to it, aptly (and obviously) called InDesign SDK. If you browse the messages in there, you can get an idea of the most common pitfalls and problems.
If the above scares you off, well, that was fully intentional (sorry, but it is). It's by far easier to write scripts. Scripts have several advantages over plugins:
1. They are platform independent (Javascripts are; AppleScript is just for Macs and Visual Basic is just for Windows). Plugins are exclusively platform dependent. To write the same plugin for both Windows and for Mac, you have to know all the pitfalls of changing code from one platform to another, and you need a complete working compiler and development system for both platforms.
2. They are version independent. Simple scripts work on a fairly great range of InDesign versions -- some of my own scripts date back to CS, and are totally or virtually unchanged. It's even possible to force "too old" scripts to work with newer versions.
3. Scripts can do most of the things a plugin can do. The main difference used to be that plugins allow you to write a fully integrated look-and-feel part of InDesign, but with the advance of ScriptUI and event handlers and menu customization, you come quite far. Only for highly specialized functions you still need a real plugin (custom item integration, custom spell and hyphenation modules, stuff like that).
4. The scripting community is very active -- it also has a forum of its own, called (well, obviously) InDesign Scripting -- and are a friendly lot, always ready to help. (Unless you whine about how to do every little thing. (That is, I can't stand that personally. Others may not mind.))
5. Scripting is easy. ... not really, but it is fairly easy, and compared to writing a custom plugin in C++, it's a breeze, a walk in the park, and a summer stroll all rolled into one.

How to create a new DataBase using Oracle 10g Express Edition???

Hello, I am new to Oracle, I am used to Microsoft SQL Server (Enterprise Manager).
Here in Oracle I do not get how do I create a DataBase, and then create tables on it.
could anyone please explain to me how to do it?

A SQL Server database is roughly equivalent to an Oracle schema.
You should rarely need to create a new database. If you do need to create a database, get a 'for fee' edition of Oracle and use the dbca tool (Database Configuration Assistant) to do that. In fact, you are only allowed to have one XE database on the machine.
However, you can create as many schemas in an existing Oracle database as you need. (One schema, owned by userid SYS, is roughly equal to your 'master catalog'.)
You can create other schemas simply by
1) creating a userid that will own the schema (one designated for maintenance of the schema);
2) grant that userid appropriate privileges, such as 'CREATE TABLE', 'CREATE VIEW' as shown in the SQL Reference manual under the GRANT section;
3) provide that userid with a quota in one or more tablespaces (see the CREATE USER command in the SQL Reference manual);
4) create the objects, such as tabels, views, sequences, stored procs and functions, etc. (as in the SQL Reference manual);
5) create the users who will access the objects, and grant them the CREATE SESSION capability (as in the SQL Reference manual);
6) grant access (select, update, execute, etc.) on the schema objects to these users (as in the SQL Reference manual);
7) if desired, create synonyms on the schema objects so the users do not need to use fully qualified syntax such as "SELECT col FROM schema.table;" (as in the SQL Reference manual).
In case you are interested in looking at the SQL Reference manual, it can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=1 ;-)

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

How to create a new database using Enterprise manager?

hi all,
thank you for all your support. i want to create a new database . I tried following these steps
i am using Oracle 9i and windows XP
1, opened the enterprise manager by clicking from programs
2,selected launch standalone Application
3, from the tree i expanded the network node and expanded the databases node ,now i can see the globaldatabase i created during installation . i can login that database using systems and manager (username & password )
4, clicked the new database icon from the window , a small window with node named database appeared
5 , I tried to expand that by clicking on the database node ,but it pops up a new window showing no active session selected
I would be grateful if anyone can suggest a solution for this
thanks & regards

Hi,
How can i access DBCA
start ---> run ---> DBCA <<hit enter>>
or
start ---> program ---> oracle home ---> configuration tools ---> database configuration assistant.Regards
Mohammed Taj
http://dbataj.blogspot.com

How to create a new customer using XD02?

Hi ,
My requirement is to create a new customer in XD02 when I change the customer name or address of existing customer and not to update the original customer.
　ex.) 1. change the information of customer code 'F001' in XD02.
2. save 'F001' not changing its information.
3. create 'F002' reflecting the updated information.
I know normally, the existing customer is updated when we change its customer name or address in XD02, but I heard BTE may meet my requirement.
Could you tell me how to realize it or possible BTE?
Regards,
Miyako
Edited by: kuwahara miyako on Nov 20, 2008 10:22 AM

Hello Karthik,
Thanks for you reply.
I am a SAP developer.
I need to create a new Exit in my program which can be enhanced later by customer.
Customer could then enhance it with CMOD
But I can not find the 'create' function in SMOD.
Do you have some advice? Thanks!

How to create a new file with existing file's resource fork?

Hello,
I would like to create a new file that has the resource fork of an existing file. I had though of making a copy of the existing file, seek to the beginning of the copy and write the new data, but for large files, that creates the whole file even when not needed. I currently create the new file with [NSFileManager createFileAtPath: contents: attributes:], but attributes do not include resource fork items, like custom icons, color label, etc.
[NSURL resourceValuesForKeys] gives a common subset of resource data, like icons and color label, but that's about it. Is there some way to get the resource fork or a copy of the file without getting the whole file?
Thanks

What are you trying to do here? While resource forks might still be quasi-supported, you really shouldn't be thinking about them as such. Instead, think in terms of extended attributes. You can use the low-level xattr() functions to get some of that or you can use the new NSURL methods.

How to create the new row with existing values

Hi all,
first of all i create a row,
i opened that in edit mode,
suppose i want to edit any one of the value in that recordd,
that time compulsory create a new row with those valuess.
how can i create a new row with those valuess.

Hi Anusha,
This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
What you have to do is:
1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
2. Now you have two rows in your VO(OLD as well as New)
3. Make any changes if you want using User Interface.
4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
I hope it will help you.
Regards,
Reetesh Sharma

How to create the new varients for existing generic article.

Hi all,
      Can any body tell how can i create new varients for existing generic article
    T-Code - MM41 ( IS-Retail).
   Plz help, helpful answers will be rewarded.
Regards,
Sai

Hi
If you have access to the program of the tcode, then go to that tcode click on system->status, to get the program name, go to se38 give that program name and select variants radiobutton, create the variant.
Regards
Haritha.

How to create a new record using a custom method?

Hi I want to create Jdev 11 a new record using the contructor following in the footsteps of http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CACCIJAG/vtTopicFile.adfdevguide%7Cweb_adv~htm/.
My problem is the following.
Messages for this page are listed below.
Error
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
Object: null is not a known entity type.
Someone can help me?
Cristian.

Hello Frank, this tutorial make it and was successful but, what I am trying to do is add a new record in the table departments. The steps undertaken are suguientes
drag over page the contructor department, with a submit, this will drag on the button, the method presistencia, set binding action with "$ (bindings.Departments.result)", and when running the application gives me the error
Nov 2, 2007 10:06:22 PM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADFc: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
I need to know if what I am doing is right, because I followed the steps of the tutorials and it is not functioning the insertion of a new record.
Thank you thank you.

How to create a new report using MS Word add-ins?

Hi, I am a newbie. I am using BI Publisher 10.1.3.4 and l want to create a simple report using BI Publisher from MS Word add-ins. I don't have a default template. What are the steps to create a new report from scratch. I want to create a simple report for one table contains 4 columns & 2 rows data, and then save the report under my folder.
I am in an urgent need to learn this, any suggestions are highly appreciated.
Thanks all.

Thx Everyone, I figured that out. It's simple and clear to me.

How to create a new app using existing Dev & Dist certificates

Similar Messages

Maybe you are looking for