How to create a new Condition for tax as VAT ( 4 % )  in SAP ? .

Dear All ,
                       Pl guide that " How to create a new Condition for tax as VAT ( 4 % )  in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if  it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

Similar Messages

  • How to create a new field for Q3 - QM notification in Header and item level

    Dear All,
    l
               Sub: How to create a new field for Q3 - QM notification in Header and item level
    Ref. the link --> Quality Notification
    We want to create a new field in header level and item level.
    As per the thread the solution is given below.
    In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
    Quality Notification -> Notification Types -> Define screen areas for notification types
    WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
    Please help.
    Question No. 2 :
    THE REQUIREMENT IS GIVEN BELOW.
    We want to hide the field in Q3 - QM Notification
    In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
    Ref the link --> Quality notification
    The solutiion is given below.
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
    Plese do the needful.
    We are using ECC6.0 Ehp3 and Ehp4.
    With Best Regards,
    Raghu Sharma

    Dear Pushpa,
    Transaction Code :SHD0 is working fine.
    Please accept my sincere thanks for your sharing your Knowledge.
    I am able to fulfill my
    Regarding the enhancement, I have not tried.
    Once I will complete, I will award the fulll marks to you.
    With Best Regards,
    Raghu Sharma

  • How to create a new row for a VO based on values from another VO?

    Hi, experts.
    in jdev 11.1.2.3,
    How to create a new row for VO1 based on values from another VO2 in the same page?
    and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
    Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
    How-to declaratively create new table rows based on existing row content (20-NOV-2008)
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
    I have tried:
    1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
    2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
    3.add: Create insertinside Createwithparams->Nameddata(amount),
    4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
    On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
    <Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
    java.lang.NumberFormatException: For input string: "Amount"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    Can anyone give some suggestions?
    Thanks in advance.
    bao
    Edited by: user6715237 on 2013-4-19 下午9:29

    Hi,CM,
    I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
    My principal requirement is as follows:
    1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
    --so it's better to implement it in UI rather than in EO.
    2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
    --little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
    In order to get full information for the requirements of my use case, can take a check at:
    How to set default value for a VO query bind variable in a jspx page?
    (the end half of the thread: I have a more realworld requirement similar to the above requirement is:
    Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
    Regards
    bao
    Edited by: user6715237 on 2013-4-19 下午11:18
    JAVE->JAVA

  • How to create a new template for pages in iPad?

    How to create a new template for pages in iPad?

    In spite of the latest updates Pages for iPad does not support:
    1) User templates
    2) Headers
    3) Footers
    4) Page numbers
    and it is not compatible with Pages for OSX, a document cannot be edited alternatively on Mac and iPad without destroying headers and footers.
    - The Word export is far from perfect
    - Does not really support Page Layout mode (you cannot duplicate a page at least)
    - Does not have a multi-page overview
    - The spelling support of iOS and OSX is at the level of Apple Maps except 4-5 languages.
    - It takes a long time until it starts
    INSTEAD, according to the latest updates:
    - It can do change tracking
    - Lock and unlock objects
    - Add reflections to shapes
    Dear Apple, please understand:
    - We like iPad and we wish to use it for real work.
    - We wish to have user templates, headers, footers and page numbers.
    - We do not expect all the features of Pages for OSX, but we do expect real compatibility.
    - We do not wish to switch back to Word for Windows unless you force us.
    Please try to concentrate on real development not on unimportant changes like in the latest dissapointing update.

  • How to create a new account for Portal

    Hi,
    I just installed portal in my windows xp pc. Currently, I can log into the portal home page as a single sign-on user. (super user). I'm wondering how to create a new account for a portal user so that I don't have to sign on as an admin.
    Thank you so much for your reply,
    Emily

    login into SSO and create an User
    1. Login into Portal -> Builder ->Administer click on User Management which takes you to oiddas were you can create the user
    or login into sso directly
    http://<host>:<port>/pls/orasso
    http://<host>:<port>/oiddas
    Murali

  • How to create a new condition type for palets

    Hello Gurus,
    I want to create a new condition type to order material palets (like LP02) but I need to calculate a discount in % for entire palets only.
    By example:
    A discount of 5% for each completed palets.
    I order 1 palet for 100euros, I want a discount of 5 euros, and final price is 95euros.
    I order 1,5 palets for 150 euros, I want a discount of 5 euros and final price is 145 euros (100-5% + 50) and not 142,5euros (150-5%).
    I order 2 palets for 200 euros, I want a discount of 10 euros and final price is 190euros
    I tried with a fixed amount calculation type and it works fine, I have a discount only for entire palets. But when I tried with percentage calculation type, it doesn't work.
    Any Idea?
    Thank you for your help
    Gregory

    Hi,
    In the pricing procedure config, you will have to create a new formula under the AltCBV (Alternative formula for condition base value) column.  The base quantity should be
    Order Qty DIV 1
    That will give you the effect of truncating the decimals.   Suggest you get an ABAPer to have a look for you.
    Phyllis.

  • How to create a new value for template classification??

    I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C.
    thanks in advance for any hints
    Jochen Winler

    Hi Jochen,
    Follow the customiztion path:
    SAP Web Application server->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes
    (For 4.6c the path is:
    Basis Components->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes)
    By this you can maintain task class entry as you required.
    Hope this helps.
    Pls. close the thread once your problem is solved.
    Regds,
    Akshay Bhagwat
    Note: Pls. reward with points if it helps:)
    Message was edited by: Akshay Bhagwat
    Message was edited by: Akshay Bhagwat

  • Urgent: How to create a new layout for portal lightframeworkpage

    Expert,
    I want to create a new layout for  external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
    Need an urgent help.
    Thanks in advance
    -Lave Kulshreshtha

    Hi,
    Look into this blog to know, how to write custom layouts:
    Nuts and Bolts of the External Facing Portal (EFP)
    Once you wrote your layout jsp, then declare it in portalapp.xml like this:
    <component name="example_narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
    As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
    Try all this and if you have specific questions, let me know.
    Regards,
    Praveen Gudapati

  • How to create a new object for a particular class?

    Hi,
      Can anybody please tell  the steps for creating a new object for a particular class.
    Thanks,
    Sreeja

    Declare the object as TYPE REF TO the class and use the CREATE OBJECT statement to create an object.
    DATA <obj_name> TYPE REF TO <class_name>.
    CREATE OBJECT <obj_name>.
    Please mark points if the solution was useful.
    Regards,
    Manoj

  • How to create a new request for function group?

    Hi Friends,
    My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
    Thanks,
    Kaarthick.V

    Hi Karthick,
    If you want to Change the request for your FG means,
    1. Go to SE80 ->  work bench ->  Edit object.
    Here you have the option two change the request.
    or If you want to create the Function Group means,
    Go to SE80 -> Select Function Group -> Enter name -> press Enter
    Thanks,
    Reward If Helpful.

  • How to create a new request for whole Package.

    Dear All,
    I have an unique requirement. we have a system, where developement have been done in phases with different Requests of A Package.
    Now we need to apply same package/project on different system. But unable to list/gather all change request of developement. Now, is there any option to make a request for whole package or export whole package (Table, transaction, Program, class, objects etc. Everything of this package) and then theni import into another system.
    Regards
    Dharmendra

    A suggestion:
    In Se80, display the package.  Right-click on the displayed package name and choose write transport entry. Choose "package".   Create the new transport as a "Transport of copies".  Choose your target and client as part of your copy request.
    BTW, SE80, select object, right click, write transport entry is an easy way to create a new transport for anything you need transported although not changed, such as an entire function group, etc.

  • How to create a new solution for portals?

    Hi all,
    In order to makde goinglive sesions for portals, I´ve updated SAP Solution Manager (SSM) to 7.0 EHP1-SP19.
    Portals have two servers:
    - Win 2003 for main application (NETWEAVER 7.0 2004s)
    - HPUX 11.23 for database (Oracle 10.2.0.2.0)
    I haven´t worked with solution manager until this update, and of course, I haven´t configured before.
    I´ve a mix of terms, possible configurations:
    - run SOLMAN_SETUP transaction after update ¿?
    -  install SMD ¿?
    - install/configure SLD (we haven´t configured) ¿?
    - create new solution, system components, logical components,...
    I´ve tried to create a server, database, system, but I don´t know what is the right procedure.
    I´ve seen that there is a transaction called "SOLMAN_SETUP" that I suppose I´ve have to run to configure the new version, but the EWAs configured before de update, runs properly.
    Do you know the steps as more detailed as possbible to create the new solution for portals after update?
    Does any of this steps/procedure impact into our configured and running EWAs and Goinglive sesions?
    Thanks in advance.
    Best Regards
    Chema
    Edited by: tsunix on Mar 29, 2010 9:26 AM

    Hello,
    Are you trying to get the EWA working for Go-Live check or Solution Manager?  Based on my understanding you are trying to get your Solution Manager setup to be able to generate these reports.  However, I will provide notes for both incase I am misunderstanding you. 
    Please review the following notes for getting your system prepared for Go Live checks:
    207223    SAP EarlyWatch Alert processed at SAP
    1095227  FAQ: SAP Hosting - Early Watch Alerts
    207223    SAP EarlyWatch Alert processed at SAP
    Also, you can visit http://service.sap.com/earlywatch for more help/documentation on this.
    If you are trying to setup your EarlyWatch on your Solution Manager system, then please visit the following URL:
    http://service.sap.com/ewa
    You may also want to visit this note to see if it helps.
    1257308   FAQ: Using EarlyWatch Alert
    Thanks,
    Mark

  • How to create a new library for my wife's iPod

    Hi all,
    I've been trying to get the right answer to this for a long time, but I seem to be continually coming up against very complicated solutions that are too intricate for me to actually try.  I hope someone will have the knowledge (and the patience with me!) to help.
    My wife received an iPod as a gift from the Mayor of San Francisco.  It came pre-loaded with a bunch of songs about "The City by the Bay."  It's a Nano, so it doesn't have iOS 5, the iCloud, etc.
    So I have two questions. 
    (1) I have my own iPod, iTunes account, and my own laptop.  My wife only has a work laptop so she can't load iTunes onto it (which would make this very simple).
    (2) I would like to be able to create a situation in which:
    (a) She can create her own library on my computer.  Her library would include a lot of music from my library (but not all).  In other words, I want to move some music from my library to her library, both of which are on my laptop.
    (b) She can sync her iPod on my computer.
    (c) She can load all the San Francisco music into "her" library.
    Is there a simple way to do this?  I don't want to do the "separate playlists" variation because that's not how I want to run my own library.  I want that to remain as crisp and clean as possible.
    In short, probably creating a new User account on my MacBook Pro, is there a way that I can "give" her a few dozens of my LPs, but then have pretty separate syncing experiences?  As I say, I've read a million different treatments of this, and they all seem more complicated than I'm ready to do.
    Thank you!!!!

    Or could I just plug her iPod into my computer and "manually manage music"?  What if it's somehow already set to "automatically sync"?  She would lose the music that's already on her iPod, wouldn't she?

  • How to create a new user for RMS?

    I want to create a new user and give its priorities in RMS. But failed.
    Is user management and priority management for user in RMS exist in other system,if so,where I can download it. How to integrate with RMS.
    Thanks in advance!

    What did you try? What is the version you are working on?
    In the installer, in the utility directory there is a sql script sample for user creation.
    Please also read Metalink Note:454486.1, Note:436137.1, Note:580017.1.

  • How to create a new channel for a role or an organization using API

    Hi all,
    I tryed to create a new channel using the method createChannel(...)+ in the class ContainerProviderContext+ of the package com.sun.portal.providers.context+ and everything is fine. The channel is created under the display profile of the authenticated user who asked for the new channel.
    But I'd like to create new channels for other users/roles/organizations. Does anybody know how to do that???
    Thanks in advance.

    Hi Juan,
    Yes you can use JDBC adapter to integrate with DB2 but you need to deploy the DB2 drivers.
    Possible options to integrate with DB2 are :
    We can integrate DB2 system with XI using different methods :
    a)For batch mode we can work with standard file adapter of XI
    b)Install MQ Series and use JMS Adaptersto send and receive messages with DB2
    c)Use the JDBC Adapters to directly write to the DB2 Database.These is for
      incoming interfaces
    d) Third Party Adapters provided by iway can also be utilized ,but it requires a separate license
    regards
    Gangaprasad

Maybe you are looking for