How to create a new document with a given theme, instead of choosing it every time.

Hi,
for work I only use a custom made keynote theme.
I've already deleted all the default themes, and the only one that is listed in the app is the one I actually use.
However every time I create a new document I have to chose its theme (that's normal having plenty of themes, but in my case is just a waste of time).
I was wondering if there's a way to tell keynote to start a new document with a given theme, in order to avoid to chose it every time.
Thank you for reading and for the help you will give.
Giacomo

Keynote > Preferences > General tab
select “Use theme,” and then click Choose to select a theme.

Similar Messages

Create a new document with settings appropriate for SWF or XFL output.

I'm studying up for the CS4 ACE exam, and I'm stumped on something. In the "Laying out a Document" section, it says: "Create a new document with settings appropriate for SWF or XFL output." There isn't really anything specific to creating a document for flash, except that you wouldn't add bleed. I can't find anything online that addresses this. Am I missing something here? Any document can be exported to SWF or XFL. This seems rather ambiguous. What is there to know about this?

You're right that any document can be exported to SWF or XFL. I'm not sure what you're going to be asked on the ACE exam, but here are some resources:
Help topic:
http://help.adobe.com/en_US/InDesign/6.0/WS2DECDF40-B6DA-40b6-804F-2703D6C6A460.html
Tim Cole's first of 3-part series:
http://blogs.adobe.com/indesignchannel/2008/11/indesign_2_flash_part_i_1.html
My blog entry:
http://blogs.adobe.com/indesigndocs/2009/03/exporting_interactive_indesign.html

How to create full new user with all privileges

how to create full new user with all privileges?
and how to delete existing users?
Thanks in advance..

Common solution is probably to use sudo for privilege elevation, wiki should help

I cant open a New document because it says my scratch disks are full every time?

I cant open a New document because it says my scratch disks are full every time.. I checked my selected scratch disk and it said I have about 9G of free space.. Problem is when I open the initial window to set the width, height and res it says my image size is 20.3G.. Is this the reason why I cant open a new Document?

Good day!
when I open the initial window to set the width, height and res it says my image size is 20.3G
What are the dimensions, resolution, Color Mode and bit depth?
Could you inadvertently be using ppcm instead of pip?
9GB of scratch space seems way low for serious image editing, check this out with regard to Photoshop Performance:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
Regards,
Pfaffenbichler

Creating a new document with separate images

Can someone help me create a new document that has two separate images. I can create a new document but don't know how to place two separate photos in the document. For instance create a document that is 8.5 x11 with two images each 8.5 x 5.5.

there is a number of ways to do this. also reading the manual to get a basic understanding of how Photoshop works will do wonders. Another method of learning is lynda.com
here is one way.
1 make a doc that is 8.5 x 11 at whatever resolution you need.
2 use a guide as a center point.
3 open the two pics you want to use.
4 make sure they are the same res as your 8.5 x 11
5 drag the layers from the open pics to the 8.5 x 11
6 crop and size the pics in the file so they fit in each half

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

Ilustrator freezes creating a new document with web profile.

Hi,
I have the illustrator instalation from creative cloud subscription and everytime i create a new document and on the profile combo choose "web", the illustrator freezes forever.
Im using mac version in a macbook pro 13" corei7 with 8gigs ram.

I'm having the same issue with i7 2500k, SSD, 16gb ram, 6870 2gb vram 10.7.4.
Anyone have any idea if i can get a crash report to help you guys out with figuring this?
Basically whenever i go -> new and change the document profile to web (or a few others) it just LOCKS and needs to be force quitted.
I've also just ran with the default and it locks up anyway.

Creating a new document with columns and printing effects

If you create a new document and set columns into it in the new document menu, and then subsequently create images, tables, text etc. in the document that are bigger than one column (that stretch for example across the entire page), will the part of the image that's in the gutter print and/or show up if it's saved as a PDF?
Help!
Thanks!

Guides are only there as a reference for you to help in alignment.They don't restrict what or where objects can be placed or affect their visibility or printability.
To see what your page will look like in print, switch to Preview Mode (fast way is to press W with nothing selected).

How to create the new row with existing values

Hi all,
first of all i create a row,
i opened that in edit mode,
suppose i want to edit any one of the value in that recordd,
that time compulsory create a new row with those valuess.
how can i create a new row with those valuess.

Hi Anusha,
This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
What you have to do is:
1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
2. Now you have two rows in your VO(OLD as well as New)
3. Make any changes if you want using User Interface.
4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
I hope it will help you.
Regards,
Reetesh Sharma

How to create a PDF document with page curls using Adobe CS 4?

My goal is to create a PDF document with page curls. I am using Adobe CS 4.
1.      The document was created in Adobe InDesign CS 4 where the page turn (curl) transition was applied.
2.      Then the document was exported to .swf.
3.     The .swf file was imported into   Adobe Acrobat Pro to create a PDF file with flip page or page curl transitions.
These are the problems.
1.      The background is not transparent.
2.      Page dimensions have to be increased at least an inch in width and length so that the full page can show
3.      The command and+   will not only increases the document's screen size. It increases the page margins.

PDF was never designed to support the Flash page curl effect (it didn't exist back then). Anything you try (and you've tried the standard hack) will look like a hack. Personally, I don't think the effort is worth it for an effect that's much overused.

Can I create a new document with a locked PDF file, add new pages, and lock it all again?

I published a PDF document ten years ago and now want to add Creative Commons licensing language to the copyright page. But I forgot the password! I gather from the Forum that there is no way to recover the password. However, I wonder if I can take the locked PDF file, create a new document (adding a new page for the licensing information), then lock the whole thing up again. Will this work? Thanks for your help!

To create an unprotected file you would need the password.

How to create a new file with existing file's resource fork?

Hello,
I would like to create a new file that has the resource fork of an existing file. I had though of making a copy of the existing file, seek to the beginning of the copy and write the new data, but for large files, that creates the whole file even when not needed. I currently create the new file with [NSFileManager createFileAtPath: contents: attributes:], but attributes do not include resource fork items, like custom icons, color label, etc.
[NSURL resourceValuesForKeys] gives a common subset of resource data, like icons and color label, but that's about it. Is there some way to get the resource fork or a copy of the file without getting the whole file?
Thanks

What are you trying to do here? While resource forks might still be quasi-supported, you really shouldn't be thinking about them as such. Instead, think in terms of extended attributes. You can use the low-level xattr() functions to get some of that or you can use the new NSURL methods.

Creating a new document with different formats, i.e. A5

Hi there,
I want to create a nwe document in A5 with about 10 pages, how to do that?
thanks a lot
gustavo

Hello
I guess that triggering the menu item :
File > Page Setup…
may help.
It's from this one that we may define the paper format.
Yvan KOENIG (VALLAURIS, France) dimanche 22 mai 2011 12:37:12
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

How to create a new index with already indexed folder

Hi
I have a requirement to create a new index.
I can able to create index. But,When i am specifying the data source, i am trying to include a data source which was already indexed in another index.
The system giving error that "The folder is already indexed and its available in another index".
How should i specify same folder in different indexes?

Hi Patricio,
Thanks for your reply.
Our requirement is
From your example, lets take
index1 containts a data sources \folder1.
and i have a requirement to create another index called index2 with data sources
1) \folder1
2) \testfolder\testfolder1.
From help.sap.com i understand that there is no way to specify the same folder in different indexes.
I am looking for, Is there any solution to meet my requirement
Thanks

How to create a new document with a given theme, instead of choosing it every time.

Similar Messages

Maybe you are looking for