How to create a new workspace and change the name of the existing
Hi,
can any one help me how to create a new workspace in application express 3.1 on XE DB and how to change the name of a existing workspace.
thanks
Jana
Jana,
This is discussed at length in the User's Guide. See the section "Creating Workspaces".
To rename a workspace using the admin application, edit the workspace attributes and type a new name in the field where the old name appears, then Apply Changes.
Scott
Similar Messages
-
I have a new iPad and wan to change the current account, create a new one and use that one for the new iPad, how can I so that? Tks...
I have a new iPad and wan to change the current account, create a new one and use that one for the new iPad, how can I so that? Tks...
-
How to create a new workspace!!!
hi
Can anyone please tell me how to create a new workspace in Blackberry.......
Regards
VargheseJana,
This is discussed at length in the User's Guide. See the section "Creating Workspaces".
To rename a workspace using the admin application, edit the workspace attributes and type a new name in the field where the old name appears, then Apply Changes.
Scott -
How to create a new variant and a job sheduled to use it for the exisisting programs
Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan -
How to create a new 'id and type rect' in _edge.js from your stage in javascript
how to create a new 'id and type rect' in _edge.js from your stage in javaScript
_edge.js is an object file their is any way to create ?
if i run this script "alert(Stage);" in creationComplete
i will get
i have little idea on object example
var obj = {car: "honda city"};
obj.bikes = {model: "suzuki"};
alert(obj.bikes.model);
Anyway thank u vivekuma for ur kind reply! -
How to create a new Characteristic and Key figure ?
Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay -
How to create a new UoM and assigning it to characteristic?
Hi,
How to create a new UoM and assigning it to characteristic?
i want to enter cost ( in rupees and laks) against a counter
but for that counter charecteristic required and for taht charecteristic unit of measure Rs and Laks are not defined in the system.
So please help me ....Hi,
Use T Code CUNI
Enter Unit of Measurement as RS and Text as Ruppes
Commercial and Technical Display is same as RS
Numerator is 1
Denominator 1
Exponent 0
Save
Thanks
Raj -
i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
HOW TO CREATE A NEW WORKSPACE IN APEX 4.0
I installed APEX 4.0, IN MY ORACLE DATABASE 10G EXPRESS EDITION, AND WANT TO CREATE A NEW WORKSPACE CALLED *"SMD"* SIMULATION FOR A PROJECT, THE PROBLEM IS THAT HE TRIED MAKING A *"Service Request"* and giving them to *"Sign up for Another workspace "*THEN CALLS ME THERE NAME, LAST NAME AND MAIL, AND THE NAME OF THE NEW WORKSPACE BUT DEVILS ARE NOT WHERE THE PASS OR USER TO BE ABLE TO ENTER NEW WORKSPACE CREATED WITH THAT, IF SOMEONE KNOWS HOW TO DO IT RIGHT FORM?
Hi,
This might help if I did understand correctly what you are looking for
http://download.oracle.com/docs/cd/E17556_01/doc/admin.40/e15521/adm_create_wkspc.htm#sthref399
Br,Jari -
How to create a new account and copy all settings?
I think my main user account is corrupted. So I want to create a new account and copy all of my settings, files etc..and more than likely piecemeal just incase my settings are what is corrupted. That way I can isolate the problem.
I don't plan to delete the main account until satisfied and I also have my Time Machine backup plus my SuperDuper backup.
I can/should be able to figure out how to create the new account, but I am very unclear on the best/easiest approach to copy in my iTunes files and settings, applications(is this even an issue), address book, email, etc? I should be able to find most everything underneath my home account folders but what else am I missing here? I don't want to find out the hard way.
Please share some advice or perhaps a link/FAQ on how to approach.
Thanks in advance.
--Mickeyuse this [link|http://discussions.apple.com/message.jspa?messageID=6185507].
-
How to create a new node and its subnodes(zreports) in Transaction SRET
Hi Expets,
My requirement is to create a new node and subnodes(zreports) in the Transaction SRET.
Where as i am able to create a subnode(zreports) under the existing node but not able to create a New Node and
Subnodes(zreports) under it.
To create the subnodes(zreports) i used Transaction SERP and i was able to create the new node in SERP but not able to find it in SRET.
So please help me out.
Thanks,
KrishnaDear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma -
How to create a new folder with a different name everyday
Hello everybody,
I have another question if you don't mind. But first thank you again to V.K and red menace for helping me with the my previous post.
This is actually the same project, I just keep on seeing new obstacles when I'm almost done.
Below is my workflow. My workflow is exporting a quicktime movie to a folder in our server.
What I need to do at the end is to move the exported file into a folder but a folder needs to be created and it has to change at about midnight everyday.
For example today the file will go to Server>Client folder>File folder named 09-04-2008
Then the next day, I need to put the new exported files to Server>Client folder>File folder named 09-05-2008.
First, how can I create a sequential named folders and second how can I tell Automator to put the files in the right folders. This process is a 24 hour process.
Thanks for you future help.
Helmut
1) Get Specified Finder Items (Pointing to File Folder)
2) Get Folder Contents (tried checked and uncheck on Repeat for each subfolder
3) Get Specified movie ( I guess Filter finder items and choose .mov will work too)
4) Quicktime Export (exporting it to the Exported Folder)
5) Get Specified Finder Items (Pointing to File folder to get to the original file)
6) Get Folder Contents
7) Filter Finder Items (choose .mov)
8) Move Finder Items ( pointing to Archive Folder to move the original file)
9) Get Specified Finder Items (Pointing to Exported Folder)
10) Get Folder Contents
11) Filter Finder Items (.mov)
12) Move Finder Items (Pointing to Server Folder)It doesn't look like there is an easy way to do this. The sort and filter actions don't let you use variables, and I haven't found any actions that will alter a list. Making a text file with the name of the newest folder seems kind of clunky, but it is an option.
What I was thinking about was an action that would take the first item in a list - then you could get your backup folders, sort by creation date, and just take the top one in the list (the newest one). Hmmm - this should be fairly straight-forward, so maybe I'll write an action
In the mean time, give the Run AppleScript action in the following workflow a try.
Tested workflow:
1) Ask for Finder Items (Type: Folders)
2) Get Folder Contents
3) Sort Finder Items (by creation date in ascending order)
4) Run AppleScript (the following script)
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters}
return the first item in the input list
input: a list of anything
output: the first item, or {} if none or error
set output to {}
try
set the end of the output to the first item of the input
end try
return output
end run</pre>
5) View Results
The above workflow should return the newest item in the selected folder. -
How to create a new transaction and add it to Area Menu
Hi.
I have to create a report and run the report using the Tcode and Tcode has to be added in the Area Menu at the initial screen.
Please tell me how can i do that.
Thank you in advanceYou can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
The CUA area menus are converted to tree navigation in Release 4.6A. The menu contents are automatically copied into a new data structure in Upgrade to Release 4.6A or higher. You can edit Area Menus with a new maintenance interface (Area Menu maintenance transaction: SE43 ).
Reporting Tree Integration - Only transactions could previously be put in Area Menus. From Release 4.6A you can also put all the types of reports which are in reporting trees, in Area Menus. The system automatically assigns a transaction code to call the report from the menu. If you have already put the report in another Area Menu, no new transaction code is generated, the unique transaction code already assigned is used.
You can create Area Menus from complete reporting trees with the migration transaction RTTREE_MIGRATION . The report transaction codes are generated automatically.
Reporting trees can only be displayed. They cannot be maintained. To modify the contents of reporting trees, you must convert them with the migration transaction. You can then modify the contents with the Area Menu maintenance. -
Hello Community
I created an "objective" and "Agenda" in a Meeting Workspace and added
"Attendees".
Later on I created another "objective" and "Agenda" in a Meeting Workspace
but, the "objective/Agenda" and Attendees from the last "objective/Agenda" remain visible.
The question is how do you create an objective/Agenda and apply the
attendees that will attend that "Meeting Workspace" and then later create
another "objective/Agenda" and enter the "Attendees" to that new Meeting Workspace?
Note: Another way to ask the question is how do you separate and save
each Meeting Workspace its "objective/Agenda" and its attendees subsequent
objective/Agenda and its attendees so that you can see each individual meeting
and the attendees of that meeting?
Thank you
ShabeautHi Shabeaut,
We could create/link to a meeting workspace when we create a calendar event as I posted above, we could also create a meeting workspace without creating an event.
http://office.microsoft.com/en-us/sharepoint-foundation-help/create-customize-and-delete-a-meeting-workspace-site-HA010378262.aspx
Here is the reference for Decision Meeting workspace:
http://techwirenews.com/2013/01/15/using-decision-meeting-workspace-in-sharepoint-2010-office-365-part-ii/
In most cases, each meeting workspace is dedicated for certain meeting event in one to one relationship. You need to create difference workspaces for differenct meetings.
Regards,
Rebecca Tu
TechNet Community Support -
How to create a new user and group on command line?
Hi,
I am trying to install INN, the news server on OS X.4.8 (non-server), but it requires me to create a user and group, both called 'news'.
I know this has something to do with using Netinfo to create them, but I am logged in remotely via ssh and I can't use Netinfo Manager.
How do I create new users and groups via the command line.
Thanks for any help.
PowerMac G5 2x2.7GHz Mac OS X (10.4.8)I've put some shell scripts that do this here,
and descriptions
add_user
addgroup
Maybe you are looking for
-
How can I construct a custom PDA dialog?
Hi, I need to display a PDA dialog along the lines of "Do you want to save the data, Yes/No? The two button dialog in LabVIEW is ideal, but on the PDA module you can't set the button text. OK and Cancel don't cut it, as this dialog presents one optio
-
I use google as my homepage. Very often( every day at some point) when I search a subject and click on the address, a google search page come up with list of choices. When I click on address it simply returns to this page and will not let me access a
-
How to download Adobe Edge Inspect?
It maybe weekend woes, but I find it impossible to download Adobe Edge Inspect. For starters, I would like to test the free version. This is what I'm doing 1 )install the Edge Inspect Extension on Chrome 2) sign up for Adobe Create Cloud 3) go to app
-
Why do I have to download flash player, 3-4 times a week?
Why do I have to download flash player, 3-4 times a week to play my games?
-
PSE 5.02: Catalog cannot be opened (hour glass)
Please help me: I have a big problem: A rather new Vista PC, PSE 5.02, rather big catalog (18MB). PSE has frozen (no reaction, only hour glass). After I killed PSE I restarted it. The PSE Windows shows up (without any pictures) and again immediatly P