How to create a Purchase order from XI Using ORDERS05

Hello Experts,
I need to create a purchase order using OREDRS05 from XI. I was not able to create and I am having these quires.
1. What are all the mandatory fields that I need to fill in to create a purchase order?
2. Which part of the SAP will take care of the control record? Is this done by SAP or Integration Tool?
3. When I have tryed with an existing Inbound Idoc(On R/3 Side) its showing Satus 51 what should I do?(Error: There is no article description for item 000010)
If Possible give me the step by step procedure to reslove..
Thanks in Advance,
Sai Suma

Hi Suma,
Check this link
Creating Purchase Order IDOC through XI
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
Sachin

Similar Messages

  • How to create a purchase requisition from the EP

    1. How to create a purchase requisition from the EP & What are the pre-requiste?

    Hi,
    You need to create a SAP transaction iview for purchase requisition transaction and link it to the role and to the user to view purchase requisition transaction.
    First you need to create a system in portal to link to the R/3 system. For creating system check this link.
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
    For linking portal with R/3 and view the Purchase requisition check this link
    Configuring EP for connecting to SAP R/3
    Regards
    Arun

  • How to create a Sales order from multiple quotations?

    Hi All,
    Please tell me how to create one sales order from multiple quotations?
    Regards,
    Maddy

    Hello Maddy,
    To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
    It will give you a pop-up to choose your quotations item while creating the sales order.
    Some per-requisites are there:
    1. Copy control should be maintained between your quotation and sales order.
    2. Quotation should be error free and should have the status "Released"
    3. Sold to party and Organization should be same in both transaction.
    For more information you can check the below link:
    Processing Quotations - Sales Transactions - SAP Library
    Best Regards,
    Dinesh

  • How to create customer purchase order

    Hi,
        How to create customer purchase order?
    Thanks & Regards,
    Naren.

    Dear Naren,
                       As you told we create a purchase order to the vendor by ME21N. This is done by the MM consultants. Now to create a purchase for the customer to say is nothing but to create  a Sales Order based on the Purchase Order details of the custome by T.Code VA01.
    Please get back if need any further explanation.
    Thanks & Regards
    Sadhu Kishore

  • How to delete a purchase order from the database

    I thought that I was in development machine but I was wrong., I have created a purchase order that I would like to delete from the database.
    Thanks in advance.

    >
    Amarnath Reddy Gurappa wrote:
    > Hi ,
    >
    > I would suggest you to put the deletion mark and save the PO .
    >
    > IF you really want to delete the po in the database  then go to the table ekko and
    > ekpo and delete them ,but for this you should have access to se16n and
    > &sap_edit
    PLEASE, do not recommend such, because it is a wrong approach.
    a purchase order has certainly more entries than jsut in table EKKO, and EKPO.  you can check in DB15 how many tables belong to the object MM_EKKO. If you delete jsut entries from EKKO and EKPO, then you create inconsistencies.
    SE16N and &sap_edit, is not anymore possible having current patches installed. SAP revoked this option, because people like you spread this thru the internet and this is causing security issues.
    A phyiscal deletion should only be done via archiving, this is the standard process.
    If you entered something in error, then set the deletion indicator, everybody can do mistakes, but deleting it with irregular options from the database is certainly a much bigger error.

  • How create a purchase order without imputation using bapi: BAPI_PO_CREATE1

    Hello Forum
    I have an request for purchase order with imputation K (cost center, EBAN-KNTTP). During the liberation of the request for purchase order, and using the Bapi: BAPI_PO_CREATE1, I want to create a Purchase Order without imputation (imputation empty or charge empty).
    The system displays the following error: The request for purchase order, item (position) 10, is attributed to another order...
    I imagine that is because the request for purchase order has imputation (charged) K and the purchase order will have no type of imputation (imputation empty).
    However, manually, Yes, I can create the purchase order. That is, I first release, the request for purchase order. Then I create the order of purchase using ME21 and with reference to request for purchase order, and when SAP returns the items of the request for purchase order, I manually remove the imputation K, and these items to become the purchase order.
    Please support me want to know how to resolve this case, why can not I create a purchase order without imputation to from the request for purchase order with imputation K, using Bapi
    Thank you.
    Greetings,

    Hi,
    In the item overview of the purchase order creation screen (ME21N), you have a column Purchasing Doc and next it item no.  You can give the existing purchase order number here with item no which will create a purchase order, and changes can be made wherever you require.
    Hope this helps.
    Thanks
    Krishna.

  • How to create a purchase order in sapR/3

    Hi,
      I want create a purchase order in SAPR/3 system.so for that i need some information like
          which bapi i need to run,input parameters for that bapi.Important values and how to set them.pls kindly send me the related information about that and also send me the java code to do it.

    bapi for creating ourchase order is bapi_po_create.
    Try run it and in return table will be error message about mandatory/wrong parameters.
    For more information get documenatation about that bapi (eq. sap gui, "bapi" transaction) or ask in abap forum
    Regards
       Vedran

  • How to create multiple Purchase Order  using the same document number?

    HI Friends,
    I m in a product which extracts data from SAP and stored in Access database.
    For that,while i extracting Purchase Order from the Demo Database (SBODemo_US)for OEC Computers,the same DocNum is used for several Purchase Order using Index Line numbers.
    eg:
    DocNum for Purchase Order1 -->3000   0 (Index)
      DocNum for Purchase Order2 -->3000   1 (Index)
        But i can't create multiple Purchase Order using same DocNum manually in SAP B1,Could anybody please help me <b>to create a Purchase Order using same DocumentNumber?</b>
    Thanks in Advance
    SooriyaKala.P

    Hi,
    The problem statement is not quite clear to me.
    As far as I understand your statement, I think you want to club multiple orders into one purchase order using the index incrementally.
    For this I think once you have created the first purchase order, open the purchase order in edit mode the second time and append the new line items.
    If I am getting you wrong please explain the problem statement in more detail.
    Regards,
    Rara.

  • How to make collective purchase order from planorder generated from MRP

    Hi Experts,
    I have 2 queries are
    1) Is there any option to create collective Purchase order or Purchase requisition from Plan order generated from MRP ?
    for e.g one packaging material is use in different finish goods products when we run MRP on all finish goods its generates Plan order of FG and BOM. In  packaging material it dependent of 3 to 4 FG and its generate 3 or 4 different Plan order.
    It is possible to create collective PR or PO ?
    2) Is there any possibility to convert Plan order onto Purchase order by vendor , material and delivery date ?
        I have use ME59N and MD15 but its not useful for me.
    Thanks
    Farrukh khan

    Dear farrukh,
    when MRP run You should set mrp control parameter
    Create Purchase requisitions :- 1
    then after mrp run Purchase requisitions created.
    and
    we can change collective Purchase requisitions in to one Purchase order.
    go to selection variant in ME21N,
    then select Purchase requisitions and put all Purchase requisitions.
    and adopt and create Purchase order.
    but condition is it will create only same material and same vendor.
    Jainashu

  • How to create a Return Order from a Quality Notification?

    Hi everyone at SDN.
    Really need some help on this issue we are having. We want to create a Return Order from a Quality Notification, ie. the document flow should be:
    :: Serv. notif 000200000482
       :: Return Order 0060299453
    In the SAPGUI we are able to do this by going into transaction QN02, enter the notification number and in the menu: "Notification" --> "Functions" --> "Sales Order" --> "Create Selection of Order Type". Now we select the Return Order type and the result is as wanted.
    However, we want to do all this in ABAP instead. The BAPI I have tried with is BAPI_CUSTOMERRETURN_CREATE.
    And the following code is used:
        ls_order_h_in-refobjtype = 'BUS2078'. "Quality Notification
        ls_order_h_in-refdoctype = 'Z5'. "Quality Notification type
        ls_order_h_in-refobjkey = '000200000482'. "Ref. Quality Notification
        ls_order_h_in-doc_type = 'ZREN'. "Return Order type
        ls_order_h_in-sales_org = 'S001'.
        ls_order_h_in-distr_chan = '01'.
        ls_order_h_in-division = '01'.
    Then I add a material as well as the mandatory partner functions. When I execute the Return Order is created but when I check the document flow for the Return Order there is no link to the Quality Notification.
    Any suggestions on how to do this? I have tried using FM RV_DOCUMENT_FLOW_UPDATE_U for updating the document flow but it doesn't seem to like it when I enter a Notification in there. And when I run FM RV_ORDER_FLOW_INFORMATION for the above (working) Return Order there is no Quality Notification available. So this leads me to believe that I have to update something else then VBFA (Sales Document Flow)...
    I would really appreciate all the help I can get on this.
    Best Regards
    Niklas

    anyone?

  • How to find the Purchase Orders from Sales Order number

    Hi ...
    Is there a way to write a query to find the Purchase orders
    from the Sales Order number ....
    I have notice the table POR9 (Purchase Order - base Document)
    but it seems to be empty.
    Could you please help me to figure this out,
    Thank you very much
    Kind Regards
    Sanjaya

    hi,
                 u did mistake in selecting the table
    SELECT T0.DocNum FROM ORDR T0                 for  sales order
    SELECT T0.DocNum FROM OPOR T0                 for purchase order
    how to find the table in SAP B1.
    go to above menu view => system information. tick it(or select it)
    then below status bar u can see the table and field name.
    open the required form and just keep the  mouse cursor  on any field.
    you can see the table and field name below.
    hope now u can able to track the table name.
    regards
    sandip

  • How to bring 'Firm' Purchase Orders from legacy system through PDOI

    Hi
    we are interacing the purchase orders from a legacy system through Open Interface i.e PDOI.
    Here i have to enable the Firm_Flag for all these PO before converting to oracle. I found that there is a column firm_flag in po_headers_interface table , but when i am populating taht column to 'Y' also, the firm flag at the PO window , by clicking the Terms button, is not reflecting.
    Please let me know why PDOI is not picking up the value at the header table. Any help is really helpful.
    Thanks
    Vyaghresh

    Vyaghresh
    Can you tell us your version?
    Thanks
    Nagamohan

  • How to import 300 purchase order into SAP using excel upload

    Hi Everyone,
    I am trying to close all the existing purchase orders in the system (about 300) and create similarly 300 new ones under new accounts.
    My questions is can I do that using an excel upload, or it will have to be done manually? If I can, any help in that regard would be highly appreciated.
    Regards,
    Abubakr Asif

    Hi
    Welcome to SDN World!
    You can use LSMW to create 300 Purchase Orders.
    please check this link for guidance
    http://www.ficoexpertonline.com/downloads/0703.doc
    To close existig POs, you can use Mass update (Tr code MEMASSPO).
    hope it helps.
    regards
    Srinivas
    Reward if it helps

  • Printing Purchase Order from ME9F using custom program and smartform

    I was able to use my custom program which calls a smartform to print purchase orders from transaction ME9F. I did this using transaction NACE.
    However, when I call "Output Message" from ME9F, the output always fails (shown by an 'X' icon after the checkbox). When I try to put back the standard program in NACE, it does not show an 'X' but a check which indicates that the printing was successful.
    Do you know why this happens? What did I miss?
    Here's my call to my smartform from my custom driver program:
        " Change Smartform ZP_MMSF_P01_PURCHASE_ORDER
        " to internal Function module name
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
            EXPORTING
                FORMNAME   = 'ZP_MMSF_P01_PURCHASE_ORDER'
            IMPORTING
                FM_NAME    = fmname
        wa_cparam-no_dialog = 'X'.
        wa_output-tddest = 'LOCL'. "or 'LP01'.  "Spool: Output device
        CALL FUNCTION fmname
            EXPORTING
                control_parameters         = wa_cparam
                output_options             = wa_output
                i_data                     = i_data
                wa_lookup                  = wa_data_lookup
                goods_amt                  = goods_amt
                discount_amt               = discount_amt
                vat                        = vat
                total_amt                  = total_amt
                total_amt_inwords          = total_amt_inwords

    Vijaya,
    I have this problem though,
    Whenever I try to provide values for CONTROL_PARAMETERS and OUTPUT_OPTIONS to the sapscript call in your code, the PO printing (even the preview) does not proceed. I do this because I wanted to suppress the printer dialog.
    here is a fragment of the code:
    " code I added
    LS_COMPOSER_PARAM-tddest = 'LOCL'. "or 'LP01'.  "Spool: Output device
    LS_COMPOSER_PARAM-bcs_langu = sy-langu.
    LS_CONTROL_PARAM-preview = 'X'.
    LS_CONTROL_PARAM-no_open = 'X'.
    LS_CONTROL_PARAM-no_close = 'X'.
    LS_CONTROL_PARAM-device = 'PRINTER'.
    LS_CONTROL_PARAM-no_dialog = 'X'.
    DO NAST_ANZAL TIMES.
    *--In case of repetition only one time archiving
    * if sy-index > 1 and nast-tdarmod = 3.
    * nast_tdarmod = nast-tdarmod.
    * nast-tdarmod = 1.
    * ls_composer_param-tdarmod = 1.
    * endif.
    IF SY-INDEX NE 1 AND REPEAT IS INITIAL.
    REPEAT = 'X'.
    ENDIF.
    CALL FUNCTION LF_FM_NAME
    EXPORTING
    ARCHIVE_INDEX = TOA_DARA
    ARCHIVE_PARAMETERS = ARC_PARAMS
    CONTROL_PARAMETERS = LS_CONTROL_PARAM
    MAIL_RECIPIENT = LS_RECIPIENT
    MAIL_SENDER = LS_SENDER
    OUTPUT_OPTIONS = LS_COMPOSER_PARAM
    USER_SETTINGS = SPACE
    IS_NAST = NAST
    IS_REPEAT = REPEAT
    I tried to trace it to the function module generated by smartform. The error propagates this way: From the function module, there is a call to function SSFCOMP_PROCESS_DOCUMENT. Then inside that function, there is a perform operation to tr_ssfcomp_process_doc
    perform tr_ssfcomp_process_doc using startpage docstruc
                                           header.
    Inside that form, it calls the macro tr_active which checks the value of ssfcstat-trlevel (tracelevel) against c_trlevel_document. In the macro, if ssfcstat-trlevel is less than c_trlevel_document, the smartform will fail. c_trlevel_document is 15 and ssfcstat-trlevel is 0, and so the smartform fails.
    (you can see the macro tr_active in include LSTXBCMAC and the form tr_ssfcomp_process_doc is in the include LSTXBCFTR)
    When I do not put values in CONTROL_PARAMETERS and OUTPUT_OPTIONS, everything is ok.
    Do you know why this happens?
    Thanks in advance!
    Edit: I have found out about transaction SFTRACE, but this is disabled.
    Kyle

  • How do you create a purchase order from a sales order?

    Is there a specific patch level for B1 2005 that implements this, is it a feature only in B1 2007 or does it have to be custom coded?
    If this has to be custom coded, does anyone either have sample code or a module that could be purchased that implements this?
    Thanks,
    Derek
    Running SAP B1 2005A SP:01 PL: 31

    Derek,
    SAP Business One has this functionality out of the box.  This functionality has been there for ever.
    You can very well use this functionality in your current SBO 2005 A Patch 31 version.
    What  business scenario are you planning to use this?  The reason for my asking this is because there are couple of ways to approach this.
    1.  You are creating a PO from an SO as Part of a Dropship requirement then in SAP you can define a Dropship warehouse and create the SO Item from this dropship warehouse.  Doing so SAP automatically Opens the Purchase Order Confirmation screen when you Add the Sales Order.  Here you can select your Vendor / Vendors and confirm the PO creation.
    2.  The second way is to create a SO from a regular warehouse and then manually go the logistics tab of the SO and check Purchase Orders.  This will Open the PO Confirmation and rest is the same as above.
    Let me know if you need further help
    Regards
    Suda

Maybe you are looking for