How to create a report from multiple dynamic XMLs

Hi,
I'm trying to build a consolidated report that gets data from multiple XML files and each XML file is different. Although the presentation of the data will be similar, the contents of the XMLs will vary and the number of XMLs to merge will also vary.
What I would like to understand is the following:
* Is it possible to generate a report template based on dynamic columns where the column names, their format and number is different for each business object?
* Is it required to generate an XML with the entire data or can the template read information from different XML files? and if so how it can be done. Please notice that the formatting of each XML may be different.
* Is it possible to use the services to generate the reports directly? Something around these lines was mentioned in one of the sessions but it was also mentioned that it's still WIP.
I've been using the standalone version and although I can get the desired result, I couldn't merge data from multiple XMLs.
Is the new BIP version available, or an enterprise version that I can use?
Thanks in advance,

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

Similar Messages

How to create an invoice from multiple sales doc.

Hi,
how to create an invoice from multiple sales doc.
thanx,
sourav

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

How to create a Report from WebDympro

Hi All,
I just want to know how I can create a report from WebDynpro? I need to pull data from R/3 using a RFC function module, but I don't know if it exists a software to create reports.
Thanks in advance
Alexis Ramirez

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

Problems in create graphical report from Oracle FSG xml output using BIP

We are trying to create graphical reports from Oracle Financial Statement Generator (FSG) xml output. I personally have extensive exposure working with XML (BI) Publisher but until recently I have never tried to use the BIP charting wizard to create graphical reports from FSG xml output out of EBS 11i/R12.
I created an SR with Oracle but they had to create an enhancement request for this issue. Does anyone know or have any idea on how we can accomplish this. The charting wizard pops up but the xml tags available do not make any sense.
If anybody has any idea please send me an email at [email protected]
Thanks,
Leo

Try some thing like following
http://oraclebizint.wordpress.com/2008/03/10/oracle-bi-ee-101332-sending-reports-to-non-obi-users-delivery-manager-api-of-bi-publisher/

How to create APEX report from data in PLSQL table

Hi, I have a procedure that is creating/inserting records into multidimensional pslql table. I want to create a report and graph based on the data stored in plsql table. Can someone please advice how to can I select this data in apex OR point me to any sample code?
Thanks
Aali

Hi,
try to google something about ORACLE TABLE CAST
SELECT ot.yourcolumn
FROM
TABLE(CAST(yourplsqltablevariable AS userdefinedoracletype)) otE.g.
http://it.toolbox.com/blogs/oracle-guide/using-a-plsql-table-in-sql-11013
Regards,
R.

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

How to creat Data source from Multiple Tables in   SAP BI ?

Hi Experts,
1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
2. For Inventory tables are           :           MSEG MKPF.
3. For Invoices MIS   tables are -          RBKP & RSEG.
4. For Taxation MIS tables are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
5. For Master data tables are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
How to creat   individual Datasource for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices, 4. Taxation , 5. Mater data. ?

Hi,
Go for the generic data sources.
1. first create the view on all the tables.
        You can only use join conditions but not Union.
        you can specify one table as primary table based on your requirement.
2. build the data source based on the view.
Regards,
Siva
Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

How to create a data connection with dynamic XML file?

Thanks for all reply first!
I have formatted the submitted data into an XML file on the server side,this file can be import to PDF form correctly.
I try to send this XML file to the user to let him can review what he has submitted.
I guess that I should create a data connection to the XML file so that it can be reviewed by the user.
But the question is that the XML file is dynamic generated.
How can i do?
give me some clus or examples,please.
thanks,
Jasper.

Hi Jasper,
To show user back the result, you can use PDF instead of XML. You can store the PDF template in server and you can merge XML data with PDF template by Livecycle Form Data Integration service.
We, as KGC, can generate huge number of Adobe Livecycle forms in small periods. Also we give consultancy on Adobe Livecycle ES products and Adobe Livecyle Designer. In case of any need, do not hesitate to contact us.
Asiye Günaydın
Project Consultant
KGC Consulting Co.
www.kgc.com.tr

How to create printable report from a swing app.

Hi,
I have googled quite a bit and have searched the forum extensively but haven't found answers to my questions.
I have a small swing based application (that uses jtextfields, jbuttons, jlist, etc) that collects information from user
and stores in some variables; which are like strings, integers, hashmap, etc.
Now this information is to be formatted and is to be printed as a report.
Formatted as in, some part of the collected text is to be printed in certain font and other in different color and so on.
Also the report is to be printed on a paper leaving some space at left and at the top. That means margins need to be set.
And before all info is to be sent to printer I need to display this information in some report viewer (preview).
How can I format certain text and set margins? (Is there some Document kind of api which allows me to set margins, change font of certain text?)
How should I display this text / information as a print preview? (Should I use jeditorpane / jtextpane ?)
How should I send all the information to the printer? (What java api should be used for printing?)
The data entered by the user is not saved / persisted to any database. It's to be sent to the printer after submit button is pressed on the swing app.
Since there is no database I couldn't use jasper-reports.
Following are links to all threads (not useful) I found when I searched for swing / print / report in the forum :
http://forums.sun.com/thread.jspa?forumID=331&threadID=225351
http://forums.sun.com/thread.jspa?forumID=57&threadID=576758
http://forums.sun.com/thread.jspa?forumID=57&threadID=570629
http://forums.sun.com/thread.jspa?forumID=1&threadID=489905
http://forums.sun.com/thread.jspa?forumID=57&threadID=571093
http://forums.sun.com/thread.jspa?forumID=257&threadID=138450
http://forums.sun.com/thread.jspa?forumID=57&threadID=583150
http://forums.sun.com/thread.jspa?forumID=57&threadID=5399572
http://forums.sun.com/thread.jspa?forumID=57&threadID=579619
http://forums.sun.com/thread.jspa?forumID=57&threadID=593199
Help would be much appreciated.

alan_mehio wrote:
The simplest thing to do in your case is to load the file content into the JTextArea
then to create the header and the footer if there is any from java.text.MessageFormat
then you invoke the print method on the JTextArea instance object> Just let me know if you are face any furrher problem
Alan Mehio,
I have been able to set margins and get the printout just the way I want it (after some experiments / trial & error).
But the problem is, parameters to paper.setImageableArea() are hard coded as in the example code below :
        System.out.println("print?");
        PrinterJob printJob = PrinterJob.getPrinterJob();
        if (printJob.printDialog()) {
            PageFormat pf = printJob.defaultPage();
            Paper paper = pf.getPaper();
            paper.setSize(8.5 * 72, 11 * 72);
            System.out.println("paper width : " + paper.getWidth());// expecting 612
            System.out.println("paper height : " + paper.getHeight());// expecting 792
            System.out.println("ImageableHeight : " + paper.getImageableHeight());
            System.out.println("imageable width : " + paper.getImageableWidth());
            System.out.println("ImageableX : " + paper.getImageableX());
            System.out.println("Imageable y : " + paper.getImageableY());
            //paper.setImageableArea(108, 144, paper.getWidth() - 108, paper.getHeight() - 144);
            paper.setImageableArea(222, 244, paper.getWidth() - 222, paper.getHeight() - 244);
            pf.setPaper(paper);
            printJob.setPrintable(jTextArea1.getPrintable(null, null), pf);
            try {
                printJob.print();
            } catch (Exception ex) {
                System.out.println("exception while printing...");
                ex.printStackTrace();
        }In my case the left margin should be 1.5 inches (38.1mm) and top margin should be 2 inches (50.8 mm)
Considering 72dpi printer for a A4 size page (8.5in X 11in), the parameters to paper.setImageableArea() should be
(108, 144, paper.getWidth() - 108, paper.getHeight() - 144);
But the printout leaves only 1inch for top and left margins.
Here are o/p lines for method-call with above said params :
paper width : 612.0
paper height : 792.0
ImageableHeight : 648.0
imageable width : 468.0
ImageableX : 72.0
Imageable y : 72.0
When I pass the following values I get text printed with desired margins on the paper but the above printlns remain exactly the same!
paper.setImageableArea(222.4, 244, paper.getWidth() - 222.4, paper.getHeight() - 244);
Although I have been able to achieve what I wanted to without using 3rd party libraries,
I feel this hard coding of values isn't a good idea and leaves a doubt whether this will work on other systems with different printers.
My question is, how to get these numbers correct every time? Is there a formula for obtaining these numbers?
Also formatting of certain part of to-print text is something that is yet to be figured out.
Thanks.

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

How to create a report based on selected item from Select list?

Hi,
I have created a tables_LOV based on:
select table_name d, table_name r from user_tab_cols
where column_name like '%_type%'
Then I created a page item ListOfTables, Display as select list and pointing to tables_LOV.
I run the page, and i can select the table i want from the drop down list.
How to create a report based on the selected item? (ex: select * from selected_table)
many thanks in advance
Salah

Hi Salah,
Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
To recreate my example you should:
1) create an (interactive) report on your collection
SELECT *
   FROM APEX_collections
WHERE collection_name = 'MY_COLLECTION'
2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
declare
l_query varchar2(4000);
begin
l_query := 'select * from '||:P38_TABLES;
if apex_collection.collection_exists
        ( p_collection_name => 'MY_COLLECTION' )
then
    apex_collection.delete_collection
      ( p_collection_name => 'MY_COLLECTION' );
end if;
apex_collection.create_collection_from_query
    ( p_collection_name => 'MY_COLLECTION'
    , p_query           => l_query
end;
Make sure you add your page_item to the "Page Items to Submit" section.
4) Add an extra true action that does a refresh of the report region.
Here are two pictures describing the da:
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
Good luck and regards,
Vincent
http://vincentdeelen.blogspot.com

How can I create a Report from a SWT-Application?

Post Author: mkoch
CA Forum: JAVA
I'm a Developer and new to Crystal Reports and I have the job to create a Report from a SWT-Application.The report-files ( *.rpt) were created with Crystal Reports 10 or 11.> I'm not sure but I have access to a machine where Crystal Reports 10 Developer an Crystal Reports 11 Runtime are installed.Can anybody describe in detail how I can start the creation of a report from my Java-Application?> What libraries are needed, where can I get them and so on.I saw in the CR10-Setup that there is a Java-feature - but unfortunately this is not installed on my test-machine.--> Is it necessary to install this feature or can I get this files on businessobjects.com?Is it possible to start the report-creation from command-line?I saw a Java-example on the internet which uses Report.exe - but I haven't found this on my machine.I hope, that somebody can help me.GreetingsMarkus

Inv. #
Item
Sale Price
Lisa
Oct Sold 12
Oct Sold 12-2
Oct Sold 12-3
149
Vase Lidded
25
201
Bird
7
7
202
Bird
7
203
Bird
7
204
Bird
7
7
205
Bird
7
7
206
Bird
7
7
207
Bird
7
207
Bird
7
7
208
Bird
7
7
209
Bird
7
7
This is my very simple inventory. On previous program I could sort by those items that did not have any figure in the row across. Then I could print a report of open inventory. Such as 149 Lidded Vase has not sales amount in the four colums across, thus it is open inventory. How can I capture all those items in one report?

How to create a report in EM from scratch level ?

Hi,
Can anybody help me on this ?
The report I want to create in EM is about where the user selects a target from a drop down and it shows the CPU utilization or memory Utilization for that respective target. Is it possible to create such kind of ? If Yes, How to create the report ?
Thanks in advance.

Are you sure you want to create a report for this info?
As CPU and MEM utilization changes every second, what would be the use of a report?
I assume you are aware of the fact that CPU and MEM utilization is included for instance in the Host Homepage and can also be included in Group Pages and Dashboards.
Regards
Rob
For more information on OEM GC, like Tips and Tricks please see: http://oemgc.wordpress.com

Can create Webi report using multiple universe (multiple datasource)

Hi All,
Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
Please suggest.
Regards,

You can bring as many sources together into one report as you like.
However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
So, if data provider one has dimensions Resort, Product and Year and a measure object Sales Value
while data provider one has dimensions Resort and Year and a measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
Hope that clears it up for you.
Regards,
Mark

How to create a report based on a DataSet programatically

I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
      public NewReportWorker(string reportFileName)
         : base(reportFileName)
public override void Process()
         DatabaseController databaseController = ClientDoc.DatabaseController;
         Table table = new Table();
         string tabelName = "Table140";
         table.Name = tabelName;
         table.Alias = tabelName;
         table.QualifiedName = tabelName;
         table.Description = tabelName;
         var fields = new Fields();
         var dbField = new DBField();
         var fieldName = "ID";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         dbField = new DBField();
         fieldName = "IDLEGITIMATIEBEWIJS";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         // More code for more tables to add.
         table.DataFields = fields;
         //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
         //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
         //info.Attributes.Add("Databse DLL", "xxx.dll");
         //table.ConnectionInfo = info;
         // Here an error occurs.
         databaseController.AddTable(table, null);
         ReportDoc.SetDataSource( [MyFilledDataSet] );
         //object path = @"d:\logfiles\";
         //ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
   internal abstract class Worker
      private ReportDocument _ReportDoc;
      private ISCDReportClientDocument _ClientDoc;
      private string _ReportFileName;
      public Worker(string reportFileName)
         _ReportFileName = reportFileName;
         _ReportDoc = new ReportDocument();
         // Load the report from file path passed by the designer.
         _ReportDoc.Load(reportFileName);
         // Create a RAS Document through In-Proc RAS through the RPTDoc.
         _ClientDoc = _ReportDoc.ReportClientDocument;
      public string ReportFileName
         get
            return _ReportFileName;
      public ReportDocument ReportDoc
         get
            return _ReportDoc;
      public ISCDReportClientDocument ClientDoc
         get
            return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+           * the following two string values can be modified to reflect your system+
+          ************************************************************************************************/+
+          string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb";    // path to xtreme.mdb file+
+          string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+          // Dataset+
+          OleDbConnection m_connection;                         // ado.net connection+
+          OleDbDataAdapter m_adapter;                              // ado.net adapter+
+          System.Data.DataSet m_dataset;                         // ado.net dataset+
+          // CR variables+
+          ReportClientDocument m_crReportDocument;          // report client document+
+          Field m_crFieldCustomer;+
+          Field m_crFieldCountry;+
+          void CreateData()+
+          {+
+               // Create OLEDB connection+
+               m_connection = new OleDbConnection();+
+               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+               // Create Data Adapter+
+               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+               // create dataset and fill+
+               m_dataset = new System.Data.DataSet();+
+               m_adapter.Fill(m_dataset, "Customer");+
+               // create a schema file+
+               m_dataset.WriteXmlSchema(xsd_path);+
+          }+
+          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+          void AddDataSourceUsingDataSet(+
+               ReportClientDocument rcDoc,          // report client document+
+               System.Data.DataSet data)          // dataset+
+          {+
+               // add a datasource+
+               DataSetConverter.AddDataSource(rcDoc, data);+
+          }+
+          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+          // above.+
+          void AddDataSourceUsingSchemaFile(+
+               ReportClientDocument rcDoc,          // report client document+
+               string schema_file_name,          // xml schema file location+
+               string table_name,                    // table to be added+
+               System.Data.DataSet data)          // dataset+
+          {+
+               PropertyBag crLogonInfo;               // logon info+
+               PropertyBag crAttributes;               // logon attributes+
+               ConnectionInfo crConnectionInfo;     // connection info+
+               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+               // database table+
+               // create logon property+
+               crLogonInfo = new PropertyBag();+
+               crLogonInfo["XML File Path"] = schema_file_name;+
+               // create logon attributes+
+               crAttributes = new PropertyBag();+
+               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+               crAttributes["QE_ServerDescription"] = "NewDataSet";+
+               crAttributes["QE_SQLDB"] = true;+
+               crAttributes["QE_LogonProperties"] = crLogonInfo;+
+               // create connection info+
+               crConnectionInfo = new ConnectionInfo();+
+               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+               crConnectionInfo.Attributes = crAttributes;+
+               // create a table+
+               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+               crTable.ConnectionInfo = crConnectionInfo;+
+               crTable.Name = table_name;+
+               crTable.Alias = table_name;+
+               // add a table+
+               rcDoc.DatabaseController.AddTable(crTable, null);+
+               // pass dataset+
+               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+          }+
+          void CreateReport()+
+          {+
+               int iField;+
+               // create ado.net dataset+
+               CreateData();+
+               // create report client document+
+               m_crReportDocument = new ReportClientDocument();+
+               m_crReportDocument.ReportAppServer = "127.0.0.1";+
+               // new report document+
+               m_crReportDocument.New();+
+               // add a datasource using a schema file+
+               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+               // for more information, refer to comments on these methods.+
+               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+                              +
+               // get Customer Name and Country fields+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               // add Customer Name and Country fields+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+               // view report+
+               crystalReportViewer1.ReportSource = m_crReportDocument;+
+          }+
+          public Form1()+
+          {+
+               //+
+               // Required for Windows Form Designer support+
+               //+
+               InitializeComponent();+
+               // Create Report+
+               CreateReport();+
+               //+
+               // TODO: Add any constructor code after InitializeComponent call+
+               //+
+          }+//=========================================================================

How to create a report from multiple dynamic XMLs

Similar Messages

Maybe you are looking for