How to create a standby redolog from rac to non rac ??

Hi,
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
pls help

854393 wrote:
Thanks Shivanandha,
(maximum number of logfiles for each thread + 1) * maximum number of threads
Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
Hope This helps.

Similar Messages

Issue in creating the standby database from Active database using RMAN

Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.

Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How to create an XML document from a String.

Can anyone help,
     In the Microsoft XML Document DOM there is a load function load(string) which will create an XML document, but now we are switching to Java and I do not know how to create and XML document from a string, this string �xml document� is passed to my program from a webservice and I need to read several xml elements form it in a web server.
This string is a well formatted XML document:
<?xml version="1.0" encoding="UTF-8"?>
<Countries NumberOfRecords="1" LanguageID="en-us">
     <Country>
          <CountryCode>AU</CountryCode>
          <CountryName>AUSTRALIA</CountryName>
     </Country>
</Countries>

Thanks PC!
I made it work using:
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
factory.setIgnoringComments(true); // We want to ignore comments
// Now use the factory to create a DOM parser
DocumentBuilder parser = factory.newDocumentBuilder();
//TransformThisStringBuffer is a string buffer wich contain the 'XML document (String)'
InputStream in = new ByteArrayInputStream(TransformThisStringBuffer.toString().getBytes());
// Parse the InputStream and build the document
Document document = parser.parse(in);
But which one is faster InputSource or InputStream, were would you put the "new InputSource(new StringReader(yourString))" in the above code?

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to create a standby database?

I am running Oracle 8.1.5 on Sun Solaris. How to create a standby database? Can somebody tell me the step-by-step procedure?

Can you tell what version of Oracle you are running, because the steps can vary depending on your version.

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

How to Create an XML document from XSQL servlet which follows a particular DTD struct

how to Create an XML document from XSQL servlet which follows a particular DTD structure.Could anyone send me a sample code for this.

You'll need to associate an XSLT transformation with your XSQL page that transforms the canonical result into your DTD-valid format.
For example, given an XSQL page like:
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="rss.xsl" ?>
<xsql:query max-rows="3" connection="demo" xmlns:xsql="urn:oracle-xsql">
select title,id,description,url,to_char(timestamp,'Mon DD') timestamp
from site_entry
order by id desc
</xsql:query>and an "rss.xsl" stylesheet that looks like this:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" indent="yes" doctype-system="rss-0.91.dtd"/>
<xsl:template match="/">
<xsl:for-each select="ROWSET/ROW">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
<xsl:for-each select="ITEM">
<item>
<title><xsl:value-of select="TITLE"/></title>
<link><xsl:value-of select="URL"/></link>
<description><xsl:value-of select="DESCRIPTION"/></description>
</item>
</xsl:for-each>
</channel>
</rss>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>You produce DTD-valid output against the rss-0.91.dtd DTD that looks like:
<?xml version = '1.0' encoding = 'UTF-8'?>
<!DOCTYPE rss SYSTEM "rss-0.91.dtd">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>

How to create physical standby database without dataguard

Hi,
Can anyone please help me how to create Physical Standby Database without dataguard. As i am using Oracle 10.2.0.1 Standard Edition for production databases.
Please find the specifications of my server :
Database : Oracle 10.2.0.1(Standard Edition)
Server : Linux 4.0(32 bit machine)
As we know that Dataguard cannot be created in Standard Edition as we dont have that option in this edition. So please help me how to create the physical standby database.
Thanks in advance.
Regards,
Farooq

Hello,
I hope this link helps you out...
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm
http://www.dbasupport.com/oracle/ora10g/manual_standby.shtml
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBA
Edited by: Pratik.L on Dec 31, 2009 12:03 PM

How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?

Hi guys,
I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ?
I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ?
thanks.

Read this about creating a lion recovery on an external drive or USB stick.
http://support.apple.com/kb/HT4848
/Dennis

How to create a p7c format from a pem or der or cer

Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

On Windows double click the der or cer certificate. This should open it in the
Certificate viewer.
Open the Details tab, click on the Copy to File button and select pkcs #7 format.
Pavel.
"Subodh" <[email protected]> wrote:
>
Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html
and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

How to create A/R Invoice from draft

Hi,
How to create A/R Invoice from documnet draft using DIAPI.
Thanks,
P.Suresh Kumar

Hi Suresh Kumar,
You may check this as a reference: Re: Problems while saving the tax values in a Draft Document to AP Invoice
Thanks,
Gordon

How to create a purchase requisition from the EP

1. How to create a purchase requisition from the EP & What are the pre-requiste?

Hi,
You need to create a SAP transaction iview for purchase requisition transaction and link it to the role and to the user to view purchase requisition transaction.
First you need to create a system in portal to link to the R/3 system. For creating system check this link.
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
For linking portal with R/3 and view the Purchase requisition check this link
Configuring EP for connecting to SAP R/3
Regards
Arun

How to create a standby redolog from rac to non rac ??

Similar Messages

Maybe you are looking for