How to create a system object in portal that points to a web dispatcher
Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi
Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi
Similar Messages
-
How to create Auto complete text box in share point 2010 Visual web part
Hi All ,
I am want to use Auto complete text box in share point 2010 Visual web part ,data need to get from share point list how to create
please guide me how to use Auto complete text box
Thanking you,
Arun DarlyHi Arun,
Please refer to the following article.
SharePoint 2010: JQuery Autocomplete Textbox Containing List Items
http://smarttools.codeplex.com/wikipage?title=Autocomplete%20Text%20Field
Please don't forget to mark it as answered, if your problem resolved or helpful. -
Error while creating a system object for R3 in portal
Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AMI created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj -
How to Create a system in portal server
I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much. -
SRM system object within Portal: WAS settings with Webdispatcher
Hello Portal experts,
we have SAP EHP4 ERP system (only ABAP stack).
In order to use some SRM functionality we installed SAP EP (EHP1) and creates a appropriate system object within portal.
We use a Webdispatcher, so we have to replace within WAS area the local address by the address of Webdispatcher and appropriated port (webserver:567).
The tests of this system object looks as follows:
The address of http://webserver:567 can be retrieved
The problem are the results of following tests:
http://webserver:567/sap/bc/ping
http://webserver:567/sap/bc/webdynpro
These errors occured because the both pathes /sap/bc/ping and /sap/bc/webdynpro do not exist on Portal/Java engine.
Questions:
How can we connect ABAP backend to Portal with extra Webdispatcher?
What are the setting within WAS area?
kind regardsHi Thom,
Is your webdispatcher in front of your portal? or in front of the ICM of your Backend System?
If the applications that you want to enable via your EP are of the type: WD for ABAP, BSP, IAC or ITS then you should also have a webdispatcher in front of your Backend System (in addition to on in front of your portal).
Please check the following link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/9a9a6b48c673e8e10000000a42189b/frameset.htm
On this page, scroll down to the last example. Although the image is there to explain "High Availability of the SAP Web Dispatcher" it gives you a good view on the request respond steps.
One rule of thumb is that the EP system itself doesn't act as a reverse-proxy. In other words, if an iView points to a WD 4 ABAP application on the Backend then the actual WD4ABAP application is rendered in an iFrame.
From a technical/connection point of view the client (browser) has 2 connections, one to the EP and 1 tot the Backend.
Allot of people do not realize this when they start there project...
Cheers, hope this helps you a bit....
B -
How to create Authority check object
Hello Gurus,
How to create Authority-check object 'ZABC'
ID 'TABLE' FIELD 'ZTABLE'.
Please tell me detailed procedure.
Thanks in advance.
Best Regards,
zuberaDear Zubera,
Creating Authorization Fields
In authorization objects, authorization fields represent the values to be tested during authorization checks.
To create authorization fields, choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects ® Fields.
To create a authorization field:
1. Choose Create authorization field.
2. On the next screen, enter the name of the field. Field names must be unique and must begin with the letter Y or Z.
3. Assign a data element from the ABAP Dictionary to the field.
4. If desired, enter a check table for the possible entries. For more information about check tables.
For more information about AUTHORITY-CHECK, see the keyword documentation of the ABAP Editor.
You can often use the fields defined by SAP in your own authorization objects. If you create a new authorization object, you do not need to define your own fields. For example, you can use the SAP field ACTVT in your own authorization objects to represent a wide variety of actions in the system.
Assigning an Authorization Object to an Object Class
Each authorization object must be assigned to an object class when it is created.
Choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects --> Objects.
You can also create authorization objects in the Object Navigator (SE80).
Creating / Choosing Object Classes
The system displays a list of existing object classes.
Object classes are organized according to the components of the system.
Before you can create a new object, you must define the object class for the component in which you are working. The objects are not overwritten when you install new releases.
You can also define your own object classes. If you do so, select class names that begin with Y or Z to avoid conflicts with SAP names.
Creating an Object
Enter a unique object name and the fields that belong to the object. Object names must begin with the letter Y or Z in accordance with the naming convention for customer-specific objects.
You can enter up to ten authorization fields in an object definition. You must also enter a description of the object and create documentation for it.
Ensure that the object definition matches the AUTHORITY-CHECK calls that refer to the object.
Do not change or delete authorization objects defined by SAP. This disables SAP programs that use the objects.
You can regenerate the profile SAP_ALL after creating an authorization object.
Best Regards,
Rajesh
Please reward points if found helpful. -
Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan RHii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull. -
Hi everyone,
I'm trying to to display a BI Report in the Portal. Both systems are on NW04s.
The connection test of the BI system object fails with the following error:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. WAS_AND_ITS_CONNECTION_TEST_DETAILS_RESOLVE_NAME
6. WAS_AND_ITS_CONNECTION_TEST_PING_SERVER_DETAILS
7. WAS_CONNECTION_TEST_DETAILS_PING_SERVICE
8. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (hvrz0afa.hvr.sbs.de:8011)
5. WAShvrz0afa.hvr.sbs.deCONNECTION_TEST_HOSTRESOLVE_RESULT_PASS
6. WAShvrz0afa.hvr.sbs.deAND_ITS_CONNECTION_TEST_PING_SERVER_FAIL
I have done all system settings for connector, WAS and ITS.
The test connection with connector was successful.
What could be the problem?Hi,
Can you please send the values you have set for the ITS related parameters ?
Secondly, the test connection results are not reliable. I would rather request you to create a BW report iview and then use this system and check if you are able to see the report ( or get the username & password screen if the SSO is not configured or user is not mapped). This would atleast confirm that the ITS has been configured properly. If it gives an error, then we can make the necessary changes.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Problem to create a system landscape in portal
Hi,
I am trying to create a system landscape in Portal (version 6.0) . Using this I am trying to connect a external SAP R/3 system. Which is basically a CRM system. I have same user id and password in both the system. But I failed to connect. I am getting the following errors :
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sapsrv.techmahindra.com:51000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (sapsrv.techmahindra.com:8010)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Please advise.
Thanks and regards
Indranil DattaIndranil,
Can you tell us the exact settings you made on your system entry? All we know from what you have posted is that there is a connection error - without more details on the error (from the defaultrace.trc log, perhaps) or details on your system settings, it's impossible to help you.
Cheers,
Darren
<a href="http://www.fortybeans.com/">Read my blog</a> -
PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping
Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
MichaelHi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg -
How to create a view object and attach with extended AM
Hi,
I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
and another one with some other condition.
So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
But i want same seeded VO with two different condition.
Any suggestions please,
SANSAN,
There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
Regards,
Gyan -
Hi how to create logical systems.
Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub -
ADF Faces: RichTable - How to create a RichTable object
Hi. How to create a RichTable object to put in a JSF page ? I need to make a method that receive a list of name of columns and a list of list of data. This code that I have writing don't work. What's my error?
public RichTable getADFTable(
List<String> lstCols, List< List<String> > lstLstData
RichColumn adfCol = null;
List<RichColumn> lstRichCols = new ArrayList<RichColumn>();
int cont = 0;
for( String col : lstCols ){
adfCol = new RichColumn();
adfCol.setDisplayIndex(cont++);
adfCol.setHeaderText( col );
adfCol.setMinimumWidth( "60" );
lstRichCols.add( adfCol );
int contCols = 0;
RichOutputText text = null;
RichTable AdfTab = new RichTable();
for( List<String> lstData : lstLstData){
for( String data : lstData ){
text = new RichOutputText();
text.setValue(data);
lstRichCols.get( contCols ).getChildren().add( text );
contCols++;
contCols = 0;
AdfTab.setRows(this.lstEntit.size());
cont = 0;
for( RichColumn col : lstRichCols ){
AdfTab.getChildren().add( col );
return AdfTab;
}I was searching for an example and i found it but whit errors, finally i fixed and it works.
You just have to generate the data from your webservices and "put" into this structure.
The java file (Bean)
package view;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import org.apache.myfaces.trinidad.model.CollectionModel;
import org.apache.myfaces.trinidad.model.SortableModel;
public class DynamicTable {
private SortableModel model;
private List<String> columnNames;
public DynamicTable() {
columnNames = new ArrayList<String>();
columnNames.add("Col-1");
columnNames.add("Col-2");
generateColumnModel();
public void generateColumnModel() {
this.model = new SortableModel(createRows(columnNames));
private List<Map> createRows(List<String> columnNames) {
int i = 0;
List<Map> mapListforRows = new ArrayList<Map>();
for (String name : columnNames) {
Map newRow = new HashMap();
mapListforRows.add(newRow);
for (String col : columnNames) {
newRow.put(col, "data");
return mapListforRows;
// Get table model
public CollectionModel getCollectionModel() {
return model;
public void setColumnNames(List<String> columnNames) {
this.columnNames = columnNames;
public List<String> getColumnNames() {
return columnNames;
}The jspx file (page)
<af:table varStatus="rowStat" summary="table"
value="#{pageFlowScope.DynamicTable.collectionModel}"
rows="#{pageFlowScope.DynamicTable.collectionModel.rowCount}"
rowSelection="none" contentDelivery="immediate"
var="row" rendered="true" id="t1">
<af:forEach items="#{pageFlowScope.DynamicTable.columnNames}"
var="name">
<af:column sortable="true" sortProperty="#{name}"
rowHeader="unstyled" headerText="#{name}"
inlineStyle="width:100px;" id="c1">
<af:activeOutputText value="#{row[name]}" id="aot1"/>
</af:column>
</af:forEach>
</af:table> -
Hi,
I wanted to know how to create a system in VC without integrating with NW04s?
when i click on Find data i am not getting any list in systems.
Please let me know how can i get it
Edited by: Kavitha Bhat on Feb 11, 2008 12:04 PM
Edited by: Kavitha Bhat on Feb 11, 2008 12:05 PMhi kavita,
Go to Tools->Options
1) Uncheck (Mask unsupported features).
2) Try changing Runtime to Dynpro.
Hope this will solve your Prob.
Awards will be welcomed!!!!
Regards
parth
Edited by: Parth on Feb 12, 2008 3:13 PM
Please close the thread is your question been answered -
How to create Source System in BI 7.0
Hi Experts,
How to create Source System in BI 7.0, please urgent
ThanksHi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
®
Maybe you are looking for
-
Error while inserting records in sqlLite database
Hi all I am building a hybrid web app in SMP using phonegap and html. I am trying to insert records in sql database but i get an error with an undefined error code Please see below : function openDatabaseFoo() { db = window.openDatabase(clientDBNam
-
DirectLink from Premier Pro CC 2014 to Encore - no longer there
Trying to get a Premier Pro CC 2014 sequence into Encore CS6 - and it won't happen. The DirectLink from Premier Pro CC 2014 to Encore - is no longer there and I've tried simply dragging the required sequences over from the PP CC window into the timel
-
Max number of files that can be opened in harddrive through AEBS?
What is the maximum number of files that can be opened in a external hard drive (Lacie 500 GB, USB 2.0) connected through the AEBS? Looks like there is a limit. When I am trying to 'seed' files through a bit-torrent client (Azureus 2.5.0.4) many of t
-
Is there a way to avoid the message "Wrote file xxx" ?
-
Using Terminal to copy all files (hidden and not hidden) and folders from one place to another
How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another