How to create a table control from a program internal table

Hi all,
I try to create a table control that matches following requirements :
- the source table is an internal table from program (not a dictionary table)
- I need to specify my own column header titles
- the fields need to be editable
- some of the columns fields must be displayed as checkboxes, other one as texts
When I try using "Table Control WIth Wizard", the generated TabControl has the expected columns titles but the fields are not displayed as checkboxes. Moreoever, when I look at "Dictionnary, program Fields list", the table fields choosed using wizard are locked (a padlock is displayed in front of the line) So, I can not check "checkbox display"
When I try using simple Table Control -I mean without ALV-, I can use the "checkbox display" for wanted fields but I don't know how to specify the resquired columns headers titles
So, could you please help me ? How to do both : maage columsn header titles and display some of the columns as checkboxes ?
thanks for help
Regards
morgan

Hi Morgan,
Create an Interanal Table in Top Include and activate it first. Then go the Screen Layout and Drag and Drop a Table control.
Enter a name like TC. now press F6 (Dictionary/Program Fields Window). Enter the Interanal Table and Press
Get From Program Push button. Select the required Columns and transfer them. Double click on the Table Control Area only (any corner of the TC) now you get attribute window POP UP. now select the check box for with column Header or remove the available column header and place your own Text Field and give meaningful Text for them. With in the Table control you can Drag and Drop a Check Box which will occupy all the rows. Make sure you include one more column in the TOP include type C with length one.
Hope this is very Clear to YOU.
Cheers
Ram

Similar Messages

How to create our own fields in workarea in internal tables

hai
can u help me out in creating our own fields in workarea in an internal table (without header line..................)

what kinda theory do u want???
* Internal table with HEADER LINE
DATA : BEGIN OF it_output occurs 0 with header line,
          c_icon TYPE icon-id,
          bukrs   TYPE anla-bukrs,
          anln1   TYPE anla-anln1,
          anln2   TYPE anla-anln2,
          grufl   TYPE anla-grufl,
          grufl_n TYPE anla-grufl,
          leabg   TYPE sy-datum,
          leabg_n TYPE sy-datum,
          message TYPE bapiret2-message,
        END OF it_output.
The above declaration is same as the below declaration in relation to the previous thread.
* Data declarations for ty_output
DATA : it_output TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0, " Internal table declaration
       is_output TYPE ty_output." Work Area declaration
Please reward for useful answers with appropriate points
Regards
Gopi
" Internal table without HEADER LINE
DATA : BEGIN OF it_output occurs 0,
          c_icon TYPE icon-id,
          bukrs   TYPE anla-bukrs,
          anln1   TYPE anla-anln1,
          anln2   TYPE anla-anln2,
          grufl   TYPE anla-grufl,
          grufl_n TYPE anla-grufl,
          leabg   TYPE sy-datum,
          leabg_n TYPE sy-datum,
          message TYPE bapiret2-message,
        END OF it_output.
Message was edited by:
        Gopi Narendra

How to create a variable length records within an internal table?

Here is what I did in the program:
TYPES : BEGIN OF type_outerface_tbl,
            text(1000) TYPE c,
        END OF type_outerface_tbl.
DATA: gw_outerface_tbl       TYPE type_outerface_tbl,
      gi_outerface_tbl       TYPE STANDARD TABLE OF type_outerface_tbl.
The internal outerface table is fix length.
I 'APPEND gw_outerface_tbl TO gi_outerface_tbl'
If the TEXT size vary, how do I define the table?
Thank you very much!
Helen

Here is what I modified:
TYPES: BEGIN OF record_header_1,
      recty(1)        TYPE c,
      awkey(20)       TYPE c,
      doucmnttype(5) TYPE c,
      END OF record_header_1.
DATA: gw_record_header_1 TYPE record_header_1,
      gi_record_header_1 TYPE STANDARD TABLE OF record_header_1.
TYPES : BEGIN OF type_outerface_tbl,
          text TYPE string,
        END OF type_outerface_tbl.
DATA: gw_outerface_tbl       TYPE type_outerface_tbl,
      gi_outerface_tbl       TYPE STANDARD TABLE OF type_outerface_tbl.
DATA: lw_line TYPE string.
CONCATENATE gw_record_header_1-recty
          ',' gw_record_header_1-awkey
          ',' gw_record_header_1-doucmnttype
          INTO lw_line.
APPEND lw_line TO gi_outerface_tbl.
CLEAR lw_line.
I got the following error message:
"LW_LINE" cannot be converted to the line type of 'GI_OUTFERCE_TBL'.
Please advise where I did wrong?
Thank you very much!
Helen
Edited by: Helen on Nov 22, 2008 5:45 PM
Edited by: Helen on Nov 22, 2008 5:47 PM

How to read mutiple excel columns from clipboard and populate table control

Hi All,
I have a requirement to populate two columns in table control from excel using clipboard. (Copy two columns from excel and then, click on a button on the screen and table control's two columns should be filled).
I am using FM CLPB_IMPORT to get clipboard values.
eg: I am getting clipboard values as val1#val2
val3#val4
where each row is a row in excel and # indicates the columns.
The problem here is that I am not able to split val1 and val2 using the SPLIT statement using # character.
Any ideas will be appreciated.
Regards,
Arun Mohan

Hi,
Try suing the below code instead of "#" in the SPLIT statement.
CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
Regards,
Naveen
Edited by: Naveen Kumar on May 13, 2010 1:48 AM

How to create a relational view base on an xmltype table which included sev

Hi,
I am using oracle 11.2.0.1.0.
how to create a relational view base on an xmltype table which content several different .xml files?
Thanks.
for examle:
SQL> SELECT OBJECT_VALUE FROM document;
Edited by: Cow on Jan 6, 2011 7:57 PM

For example I already have these three xml files inserted into the document xmltype table.
These xml files have same schemas. I have attached below.
I want to show all elements/attribute values in xml files to relational view.
Is this possible to create one big relational view to show everything
or I have to create three separate relation views then use UNION to put together? Thanks a lot. Cow
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
<id root="5ca4e3cb-7298-4948-8cc2-58e71ad32694"/>
</component>
</document>
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
</component>
</document>
Edited by: Cow on Jan 4, 2011 9:51 AM

How to transfer data from a dynamic internal table

Hi All
I want to transfer data from a dynamic internal table<dyn_table>
to a non dynamic internal table itab which should have the same structure as <dyn_table>.
How can this be done?
Regards,
Harshit Rungta

As stated earlier this can be done only through field symbols...
You cannot create an non dynamic internal table with ANY structure...using DATA statement
If the strucutre is defined well and good...you can create an non-dynamic internal table...
If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
DATA: lv_ref TYPE REF TO data.
FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
* You create a dynamic internal table...
CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
ASSIGN lv_ref->* TO <fs_dyn_table>.
Now...do the transfer.
<fs_dyn_table> = "your_dynamic_internal_Table
Hope it helps!

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to create a Sales order from multiple quotations?

Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
Maddy

Hello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How to create an XML document from a String.

Can anyone help,
     In the Microsoft XML Document DOM there is a load function load(string) which will create an XML document, but now we are switching to Java and I do not know how to create and XML document from a string, this string �xml document� is passed to my program from a webservice and I need to read several xml elements form it in a web server.
This string is a well formatted XML document:
<?xml version="1.0" encoding="UTF-8"?>
<Countries NumberOfRecords="1" LanguageID="en-us">
     <Country>
          <CountryCode>AU</CountryCode>
          <CountryName>AUSTRALIA</CountryName>
     </Country>
</Countries>

Thanks PC!
I made it work using:
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
factory.setIgnoringComments(true); // We want to ignore comments
// Now use the factory to create a DOM parser
DocumentBuilder parser = factory.newDocumentBuilder();
//TransformThisStringBuffer is a string buffer wich contain the 'XML document (String)'
InputStream in = new ByteArrayInputStream(TransformThisStringBuffer.toString().getBytes());
// Parse the InputStream and build the document
Document document = parser.parse(in);
But which one is faster InputSource or InputStream, were would you put the "new InputSource(new StringReader(yourString))" in the above code?

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

How to Create an XML document from XSQL servlet which follows a particular DTD struct

how to Create an XML document from XSQL servlet which follows a particular DTD structure.Could anyone send me a sample code for this.

You'll need to associate an XSLT transformation with your XSQL page that transforms the canonical result into your DTD-valid format.
For example, given an XSQL page like:
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="rss.xsl" ?>
<xsql:query max-rows="3" connection="demo" xmlns:xsql="urn:oracle-xsql">
select title,id,description,url,to_char(timestamp,'Mon DD') timestamp
from site_entry
order by id desc
</xsql:query>and an "rss.xsl" stylesheet that looks like this:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" indent="yes" doctype-system="rss-0.91.dtd"/>
<xsl:template match="/">
<xsl:for-each select="ROWSET/ROW">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
<xsl:for-each select="ITEM">
<item>
<title><xsl:value-of select="TITLE"/></title>
<link><xsl:value-of select="URL"/></link>
<description><xsl:value-of select="DESCRIPTION"/></description>
</item>
</xsl:for-each>
</channel>
</rss>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>You produce DTD-valid output against the rss-0.91.dtd DTD that looks like:
<?xml version = '1.0' encoding = 'UTF-8'?>
<!DOCTYPE rss SYSTEM "rss-0.91.dtd">
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>
<rss version="0.91">
<channel>
<title>Do You XML?</title>
<link>http://xml.us.oracle.com</link>
<description>Oracle XML Website Demo</description>
<language>en-us</language>
</channel>
</rss>

How to read a current line in table control in dialoug program ?

How to read a current line in table control in dialoug program ?
this code required to provide F4 help.

Hi,
You can use the variable <tablecontrol>-Currentline as Ebus says but there is a problem with this.Suppose there are 10 records in the table control with only 5 records visible then when u press a page down and press F4 the first record in page 2, <tablecontrol>-Currentline will have value of 1 instead of 6.So you will need to write a small logic for that.
index = ( <tablecontrol>-topline - <tablecontrol>-currentline ) + 1.
read internal table itab at index.
Hope this helps.
Regards,
Vivek

How to create a table control from a program internal table

Similar Messages

Maybe you are looking for