How to create a target for a hyperlink?

I have a pdf with hyperlinks to urls. if someone views my pdf through a browser and clicks on the hyperlinks, the browser will load the url in the same window. How do I give a hyperlink a specific target, like _blank which would open the url in a new window.
thanks- any help is appreciated.

Hi,
if your using 5.0 then you must be using SAP GUI for segmentation, as vivek said you have to create CSV file with only column BP id.
1.Create profile set from Txn : CRMD_MKTSEG
2. Right click on staging area and create (Create TG) empty TG
3. Select TG and right click and import your file
4.Select file name, mentioned seperator, select business partner column
after this it should create TG with BP id mentioned in CSV file, i tried this it gives me expected result.
Regards,
Dipesh.

Similar Messages

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to create a PR for each Maintenance Order

Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDD

Hi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran.

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create a substitute for requester in SRM 7.0

Hi,
do you know how to create a substitute for requester?
we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
Thanks.
Regards,
Nelson

You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
Edited by: Jay Yang on Mar 31, 2011 10:47 AM

How to create internal table for a structure in BSP

hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
                 include type zuvendstr.
                 data:end of itab_1.
                 data wa_str like line of itab_1.
                 loop at itab_1 into wa_str. %>
                <tr>
                 <td><%=wa_str-name%> </td>
                       <%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

Hi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy

How to create Search Help for a field in Table control !!

Hello Friends,
              I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include           ZSRO_MPRN_SEARCH                                 *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
        stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE.                    "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
       stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     break gblap0.
     ws_dynpfld-stepl = mprn-current_line.
     LOOP AT i_mprn.
       MOVE i_mprn1-mprn TO i_mprn-mprn.
       MOVE ws_postcode TO i_mprn-post_code.
       MODIFY i_mprn INDEX
                mprn-current_line." transporting MPRN POST_CODE.
     ENDLOOP.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE.                    "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
          gntc LIKE iflot-zzgntc,
        END OF lt_gntc.
CLEAR:   lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZZGNTC'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select Gas Nomination Type Code'
      value_org       = 'S'
    TABLES
      value_tab       = lt_gntc
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE.                    "GNTC_F4 INPUT
*&      Module mprn1_f4 INPUT
      text
MODULE mprn1_f4 INPUT.
DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
        lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
        stepl_index1 TYPE systepl.
DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
         ws_dyname1     LIKE d020s-prog,
         ws_dynumb1     LIKE d020s-dnum,
         ws_dynpfld1    LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
         lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
         stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-MPRN'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " mprn1_f4 INPUT
*&      Module pstlz1_f4 INPUT
      text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
          lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
          stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-POST_CODE'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " pstlz1_f4 INPUT
Regards,
Prakash.

How to create business operation for starting workflows

How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java class everything
works fine(wlpi-ejb.jar is required), but when I call business operation from
Studio I can't use classes from wlpi-ejb.jar.

Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
"Andrew Pitonyak" <[email protected]> wrote:
>
When studio starts, what is your classpath? If you use the included batch
file to start it, then your class path may not include this :-)
Andrew
"Raul" <[email protected]> wrote in message
news:[email protected]..
How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java classeverything
works fine(wlpi-ejb.jar is required), but when I call business operationfrom
Studio I can't use classes from wlpi-ejb.jar.

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

How to create a target for a hyperlink?

Similar Messages

Maybe you are looking for