How to create a trigger for particular value insertion?

If I have a Table T, which has columns as A,B,C,D. I want to create a trigger to give an error message if someone inserts or updates T with values in A as '001' AND value in B as '99'
Please reply soon....
Thanks

user8560155 wrote:
I need a trigger only not a constraint...
Why? Is there any valid reason for that?
I tried the above trigger but it was not successful :(
Can I use 'If statements' as well???The below will work..
create table t
a varchar2(10),
b varchar2(10),
c varchar2(10),
d varchar2(10)
create or replace trigger trig1
after insert or update on t
for each row
--"trigger will be fired only when below condition is satisfied"
when ( new.a = '001' or new.b = '99' )
begin
raise_application_error(-20000, 'Invalid value in A or B');
end;
insert into t(a) values('001');
SQL Error: ORA-20000: Invalid value in A or B
ORA-06512: at "SCOTT.TRIG1", line 2
ORA-04088: error during execution of trigger 'SCOTT.TRIG1'
insert into t(a) values('002');
1 rows inserted.

Similar Messages

How to create event alert for particular column get updated

Hi every one.... plz help me
How to create oracle event alert when particular column is update. plz help me.... Acutually i need email alert when ever list price for an item column in pricing table get updated+... plz. Its urgent.

Oracle Event alert is based on update of specific table and not on specific column in table.
However you can create a trgigger on table which is based on updat of column. And in this trigger you can send a mail using plsql.
HTH

How to create multiple function for each value

Hi, I'm new to LabVIEW.
I need some help. Attached is my LabVIEW file.
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
Thanks in advance.
Attachments:
Exhaust EBT Wind Tunnel 1.1.vi ‏399 KB

Faruq wrote:
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
You could simply use a case structure around the Formula Express VI. When you say MathNode Script I'm assuming you're referring to MathScript? Or are you referring to the Formula Node. With either one you'd need to convert from dynamic data to arrays. With MathScrip you need to be aware that starting with LabVIEW 2009 MathScript requires a separate license.
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
You can create a custom scale for your measurement. You can do this in the DAQ Assistant.
Attachments:
DAQ_assistant.png ‏30 KB

How to create authorisation object for save button please help in abap

how to create authorisation object for save button please help in abap

Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

How to create greater_or_equal condition for file_io storage

Dear experts,
Please tell me the how to create greater_or_equal condition for query in file_io as RationalOperatorType.GREATER_OR_EQUAL is not supported for file_IO storage.
thanks n regards,
Kapoorchand.

Hi,
not sure if I got you correctly, but in
com.sap.ip.me.api.persist.query.RelationalOperatorType
There is no condition available that you are looking for. Why do you not work with
public interface Condition
Represents a condition for a query. This can either be a single condition, as FIELD = VALUE and / or a composite condition, as ( ( FIELD1 = VALUE1 OR FIELD2 = VALUE2 ) AND FIELDE 3 <> VALUE3 ).
Hope this helps!
Regards,
Oliver

How to create a Index for KM documents

Hi Experts.......
I have two queries .
1,How to create a Index for the KM Server documents so that when ever i am in need of particular document,i can be able to retrive the exact document within short time......
2,What Is TREX? Need of TREX ?
If any one have documents for the above said queries kindly send it to [email protected]
Thanks in Advance,
Jasmine

Hi Jasmine,
1.In the EP 6.0 you can create index System Administration -> System Configuration -> Knowledge Management -> Index Administration
2.TREX is search engine that will proccess the documents that you have specified in the index Data sources when you have created the index.
The status of TREX you can see in System Administration -> Monitoring -> Knowledge Management -> TREX Monitor or Index Monitor for indexing monitoring.
If you don't have connected any TREX engine to J2EE, just start the visual administrator and configure the TREX service.
To install the TREX you can follow the instguides for TREX service.sap.com/instguides SAP Netweaver->Release 04 or 2004s -> Installation -> Cross-NW
I hope that it helps.
Bye
Dan

How to create a Tip for a field in a Descriptive Flex Field in Self Service

How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
Example :
For Address
Each Address Line should have one Tip.
What should I do ?
Thanks,
John

Hi John,
It seems you have created Address Location DFF in self service in OA Framework.....
I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
I only want to display segments with values . The segments with null values should not display at all...
i.e , if Address Line 2 value is null , it should not display Address Line 2..
If you have done this, pls let me know how to go abt it.
Thanks in Advance,
Tanveer

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

How to create Activex object for my Visual C++ object

Hi,
I am working on development on Acrobat 9.0 SDK. I am facing problem is that I can compiled Visual C++ source code to an api. I can test functions on this api on Acrobat 9.0 windows, but I could not test it on IE web browser, because I don't know how to create Activex object from my Visual C++ source code or its api.
I read Acrobat 9 SDK document and found under C:\Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard has two files: Acro9PIWizInstaller.msi and setup.exe. I am not very sure those file are the key to help me to create Activex objects for my api. Are they the one I need to create Activex object? If not, could you please advise me how to create Activex object for my api or C++ codes.
Thanks a lot for any of your comments or advices.
Thai

Hi lrosenth,
Thanks a lot for your information.
My question is, on Javascript how do I call a function from .api. Below is my very simple test.
I got a function on BasicPlugin.cpp under C:\Acrobat 9 SDK\Version 1\PluginSupport\Samples\BasicPlugin. See below.
I added BasicPlugin.api on C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins
 ACCB1 int ACCB2 MyPluginCommand() {
 int num = 5;
 return num;
On my HTML file, I create an <Object> below:
 <OBJECT id="acrobatapp"
 classid="clsid:85DE1C45-2C66-101B-B02E-04021C009402">
 </OBJECT>
 <OBJECT id="acrobatpdf"
 classid="clsid:CA8A9780-280D-11CF-A24D-444553540000" >
 <Param name="SRC" value="http://www.adobe.com/devnet/acrobat/pdfs/acrobat_digital_signature_appearances_v9.pdf">
 </OBJECT>
On my Javascript. I call function MyPluginCommand() as below, but it is not working. How do I call function MyPluginCommand() on Javascript?
 var acrobatapp= document.getElementById("acrobatapp");
 var num= acrobatapp.MyPluginCommand();
 alert(num);
Thanks for your support,
Thai

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create Presentation variable for columns and to use it in Narrative?

Hi All,
Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
Thanks in Advance
Thenmozhi

Hi Satya,
I just want to create a table that should horizontally display the values like below:
     SUID Tag # :123456               Year Mfg: 2007
     Description: computer corporation FA ID#: 4576
     Model Number: 4569 hESC: #ert
     Serial Number: 78945 Flags: c
Department: Hematology
User: thenmozhi
Database: OLAP
I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
     SUID Tag # :678901               Year Mfg: 2008
     Description: Computer Manufacturing FA ID#: 4577
     Model Number: 4570 hESC: #eth
     Serial Number: 78946 Flags: G
Department: Hematology
User: Rehman
Database: OLAP
Thanks
Thenmozhi

How to create a trigger for particular value insertion?

Similar Messages

Maybe you are looking for